PDA

View Full Version : Baldwin Motion Fuel Cap Phase 3


bigtyme1
01-18-2007, 09:15 PM
Hey guys, I'm looking for the Baldwin Motin Fuel cap set up. on the phase 3 camaro. Look like it could be a cobra set up, Any body?

Lcamino
01-18-2007, 09:27 PM
Try this:http://parts.factoryfive.com/newcatalog/exterior/gascap.htm

ProdigyCustoms
01-18-2007, 10:02 PM
We have these coming in a couple weeks, $150

bigtyme1
01-19-2007, 05:49 AM
We have these coming in a couple weeks, $150

ok, great. do you think your going to get the tubes as well?

ProdigyCustoms
01-19-2007, 06:54 AM
I assume you mean the filler neck for the fuel tank? We used the original 67 filler on this car. I suppose on a 69 you could just use a 67 style tank and filler, and change the rear floor of the trunk a bit where the filler goes though the floor. Regardless, there is going to be a level of fabrication for sure.

bigtyme1
01-19-2007, 11:43 PM
I assume you mean the filler neck for the fuel tank? We used the original 67 filler on this car. I suppose on a 69 you could just use a 67 style tank and filler, and change the rear floor of the trunk a bit where the filler goes though the floor. Regardless, there is going to be a level of fabrication for sure.
OK I'm interested, I need to get some measurements when you get a chance. Probably after Barrett Jackson is over! I'm busy untill Sunday night HAHA.