Ongoing and Old Projects from Fletcher's Customs

[fletcherscustoms]

I was sitting here bored in the office and thought I would show you folks another ongoing project here at www.fletcherscustoms.com We got our start long before doing restos and pro-touring cars building badass bagged and body dropped rides (channeled for you old school guys) We have been doing a lot of full frames that allows you to lower the body 3-4 inches, so the rockers layout when aired out. This is a new project we have been working on a few months now. Truck is a 02 Ford F-150, with 2x4 rails under and the cab and dual 1.5" DOM rails outback. Truck has a 4 inch ride height and has been channeled 4 inches from stock. We are still well into the build up of this truck. And till this day we are still trying to figure out what the Ford engineers where smoking when they designed these trucks.

http://www.fletcherscustoms.com/customers/albums/Alan/DSC00433.sized.jpg

http://www.fletcherscustoms.com/customers/albums/Alan/DSC00574.sized.jpg
http://www.fletcherscustoms.com/customers/albums/Alan/DSC00624.sized.jpg
http://www.fletcherscustoms.com/customers/albums/Alan/DSC00698.sized.jpg
http://www.fletcherscustoms.com/customers/albums/Alan/DSC00699.sized.jpg

[fletcherscustoms]

Here is another old project. Truck was my daily driver for over year. Drove home off the dealer lot with 86 miles on it, on the frame table and cutup for a complete air suspension job on 22's

http://www.fletcherscustoms.com/projects/albums/2005-GMC-Crew-Cab-1500/truck2.jpg
http://www.fletcherscustoms.com/projects/albums/2005-GMC-Crew-Cab-1500/cut1.jpg

http://www.fletcherscustoms.com/projects/albums/2005-GMC-Crew-Cab-1500/rear03.jpg
http://www.fletcherscustoms.com/projects/albums/2005-GMC-Crew-Cab-1500/pass2.sized.jpg
http://www.fletcherscustoms.com/projects/albums/2005-GMC-Crew-Cab-1500/bed.sized.jpg

[fletcherscustoms]

Heres another one that never got completed. This was going to be the shop tow truck. But it eventually got parted out and sold. Truck was a 99 chevy dually with a salvage title, truck had a complete frame with one 22" and 24" cut down Alcoa Semi wheels. One off rear dually fenders and lots of fiberglass work

http://www.fletcherscustoms.com/projects/albums/BoilerMaker/prog8.sized.jpg
http://www.fletcherscustoms.com/projects/albums/BoilerMaker/prog14.sized.jpg

http://www.fletcherscustoms.com/projects/albums/BoilerMaker/prog16.sized.jpg
http://www.fletcherscustoms.com/projects/albums/BoilerMaker/prog20.sized.jpg
http://www.fletcherscustoms.com/projects/albums/BoilerMaker/prog33.jpg

[fletcherscustoms]

http://www.fletcherscustoms.com/projects/albums/BoilerMaker/BLOODRAG.sized.jpg
http://www.fletcherscustoms.com/projects/albums/BoilerMaker/3_G.sized.jpg

[fletcherscustoms]

This was my baby and daily driver for year as you see it. Truck was Sport Truck, and Truckin mg featured truck and one numerous shows across the country. And always was built to be abused. Truck seen over 45K miles in one year traveling. it also had a complete full tube chassis , bumper to bumper, 4 link suspension, air bags, 20/22 wheel combo, custom interior,suicide doors, lots of other trick goodies

http://www.fletcherscustoms.com/projects/albums/Tahoe/prog05.sized.jpg

http://www.fletcherscustoms.com/projects/albums/Tahoe/prog21.sized.jpg
http://www.fletcherscustoms.com/projects/albums/Tahoe/prog23.sized.jpg
http://www.fletcherscustoms.com/projects/albums/Tahoe/prog33.jpg
http://www.fletcherscustoms.com/projects/albums/Tahoe/prog32.jpg

[fletcherscustoms]

heres a few more random things thats been done with us

The truck Chevy never built, 82 Crew Cab short bed!! Full tube chassis, setup for 22/24" wheels. Sitting beside my shop letting nature take its coarse on it!!

http://www.fletcherscustoms.com/projects/albums/album01/out1.jpg
http://www.fletcherscustoms.com/projects/albums/album01/full2.jpg
http://www.fletcherscustoms.com/projects/albums/album01/sigpic.jpg
http://www.fletcherscustoms.com/projects/albums/album01/slammeddriver.sized.jpg
http://www.fletcherscustoms.com/projects/albums/album01/suicide.sized.jpg

[fletcherscustoms]

Some lifted stuff. I am diesel Junky so I have owned quite a few modded diesels in my time

02 7.3 F250, 8 inch lift, 38" tires, Aftermarket turbo setup, propane, NOS, custom computer setup, etc, etc

http://www.fletcherscustoms.com/projects/albums/album01/side2.jpg


My 97 F-250 with a 02 7.3 diesel with propane, 4" exhaust and aftermarket programmer
http://www.fletcherscustoms.com/projects/albums/album01/front.sized.jpg

My 03
http://www.fletcherscustoms.com/projects/albums/album01/driver.sized.jpg


that me in the back with the hat on up against my GMC, you see me????
http://www.fletcherscustoms.com/projects/albums/album01/Picture021.jpg

[XcYZ]

Heh, nice, ummm... trucks. :D

[Mr.VENGEANCE]

lol!!

[ProdigyCustoms]

It's magic, she made a 250LB man disappear!

Cool truck, I appreciate you letting me look at the siver Chevy when I was up there. It is going to be............. , how do you truck boys say it, KILLA?

[GBodyGMachine]

Wow, You guys do some excellent work.
Jeff

[fletcherscustoms]

It's magic, she made a 250LB man disappear!

Cool truck, I appreciate you letting me look at the siver Chevy when I was up there. It is going to be............. , how do you truck boys say it, KILLA?


I resent that, i'm a good 40 pounds shy of of 250!!


And Frank come on it was a Ford!! lol

[ProdigyCustoms]

It was a truck, Right?

[4mm]

It's magic, she made a 250LB man disappear!

:rofl:

[fletcherscustoms]

yeah I think it was at once. Even though I have stared at it so long I am beginning to think its the Antichrist!! Nothing but problems, The Ford engineers on the F-150 can bite my butt!! Bunch of freaking idiots!!!