View Full Version : LS1 to a TKO500
68RS350
01-09-2007, 03:29 PM
Does anyone sell a bellhousing that mates an LS1 to a TKO500? Or do i have to get an adpater plate. Also do the clutches and flywheel all mate up?
dtedler
01-10-2007, 08:56 AM
I don't want to give you any bad information so...Call Jeff or Scott at Classic Chevy 5 Speed in California. I now they have what you need, but I don't know the exact particulars.
Their website is www.classicchevy5speed.com
Tony
parsonsj
02-08-2007, 11:15 PM
Brian Schein and I made one that bolts to the factory bell.
It's been working great with both a QMI Tri-lite and Howe TOB.
Or you can use an aftermarket from either McLeod or Lakewood.
Or you can use a GM BBC 168 tooth bellhousing. The only problem with the GM bell is that most of them don't have the 12 o'clock bolt hole.
jp
jeffmort
03-12-2007, 12:32 AM
We do have one - it is a dedicated LS to TKO bell. It has all of the correct bolt holes for the LS block.
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.