PDA

View Full Version : 691 rwhp Procharged 406 for sale


camcojb
01-03-2007, 09:39 PM
Listing for a friend. I built this motor for him a couple years ago, and we had it apart for inspection last year when he started to re-do his car. Made 691 rwhp at Speed Merchant in San Jose.

factory 400 2-bolt block with partial fill
4340 steel 3.75" crank
6" H beam rods
Ross custom blower pistons
Speed Pro Plasma rings
Milodon 7 quart pan
Cloyes true roller chain
Comp hydraulic roller blower cam and lifters
AFR rev kit
Victor Jr. heads with Stage IV port by CFM Performance
Crower stainless 1.6 roller rockers
Holley SR intake and throttle body
75# injectors
MSD 85551 billet dist with GM melonized gear
MSD 8mm wires
D1SC Procharger with 11 and 14 psi pulleys
Procharger brackets, pulleys for water pump and ps
ps pump
Edelbrock Victor aluminum water pump
GM Performance cast aluminum valve covers
FAST EFI and harness

Complete throttle body to pan, including new FAST computer and harness. Have a good starting tune in the computer, may need minor tuning once installed in your car. He is selling to fund an LS2 swap over in this car. Probably less than 1000 miles on this engine. Does not smoke, runs 180 degrees in 100+ temps (literally).


$8500. FIRM including the $2000 FAST EFI system. plus freight.


http://www.camcojb.com/estel/estel%20002.jpg

camcojb
01-03-2007, 09:41 PM
http://www.camcojb.com/estel/estel%20003.jpg


http://www.camcojb.com/estel/estel%20004.jpg



http://www.camcojb.com/estel/estel%20005.jpg



http://www.camcojb.com/estel/estel%20007.jpg

mazspeed
01-03-2007, 09:44 PM
AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HH :mad:

I thought that sold on e-bay.

nvawgn
01-03-2007, 09:45 PM
how about a thousand bucks and 1 partially used liver(only 30% alcohol)

camcojb
01-03-2007, 09:59 PM
AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HH :mad:

I thought that sold on e-bay.

No, he had quit advertising it when you last got ahold of me. It was still for sale, and when it didn't sell he decided to keep it.

Now he's dropped the price a bunch and changed his mind again! :faint: Won't go lower than this though.

Jody

mazspeed
01-03-2007, 10:04 PM
No, he had quit advertising it when you last got ahold of me. It was still for sale, and when it didn't sell he decided to keep it.

Now he's dropped the price a bunch and changed his mind again! :faint: Won't go lower than this though.

Jody
I could have saved 6k with this setup right now. :willy:

Stuart Adams
01-03-2007, 10:50 PM
Nice piece, great price.

XcYZ
01-03-2007, 10:55 PM
Nice piece, great price.

Absolutely, that's a hell of a deal.

rwhite692
01-03-2007, 11:20 PM
That is a great deal indeed!

awr68
01-03-2007, 11:50 PM
Absolutely, that's a hell of a deal.

I agree!!

Jody, I take it Don is keeping the car now.....is he still changing color??

camcojb
01-04-2007, 12:16 AM
I agree!!

Jody, I take it Don is keeping the car now.....is he still changing color??

still selling the car, and still planning on red. He feels the car will be easier to sell and have wider appeal with a 550-575 hp LS2 than the procharged 406.

ProdigyCustoms
01-04-2007, 12:46 AM
What a steal!

rwhite692
01-04-2007, 05:35 PM
Wow Jody..Don's car is such a nice marina blue top and bottom...and that paint is only a few yrs old, right?...I guess it's coming completely apart and going back up onto the rotisserie again?

camcojb
01-04-2007, 06:16 PM
Wow Jody..Don's car is such a nice marina blue top and bottom...and that paint is only a few yrs old, right?...I guess it's coming completely apart and going back up onto the rotisserie again?

yeah, stripped it, minitubs, WD front clip with DSE coil overs and a-arms, roll bar, Currie rear, Fikses, 275/335 tires, etc. Basically a brand new car when done.

Jody

awr68
01-04-2007, 07:20 PM
yeah, stripped it, minitubs, WD front clip with DSE coil overs and a-arms, roll bar, Currie rear, Fikses, 275/335 tires, etc. Basically a brand new car when done.

Jody

Humm sounds like I should just buy his car when finished and give up on mine!! :willy:

Rick D
01-05-2007, 08:34 AM
And then he's going to sell it:wow: Looks like it was already a nice car and now it will be even better and then sell it??

DWG
01-06-2007, 04:05 PM
SOLD.

Thanks Don and Jody. :cheers:

6D9
01-07-2007, 12:45 PM
Man...you got a smokin deal...............:thumbsup: