KUL FIR CHICK N
12-20-2006, 08:05 PM
I'm changing direction on my project a bit and am selling my motor.
All parts are new except throttlebody, the motor is not assembled. I will separate the top end, but not the short block since it is finish bored for the pistons, and balanced.
400 Mains Cast Iron Bow Tie Sportsman CNC
finish bored/honed to 4.125" matched to pistons
Callies 3.75" 4340 Crankshaft, Manley H beam rods w/arp 2000 bolts, Ross turbo pistons, coated by HPC balanced assembly.
Edelbrock Victor Jr. heads, polished chaimbers, cut for felpro wire lock gaskets, titanium retainers
TPIS Miniram manifold
Complete Comp hyd. roller valvetrain: Turbo cam, retro lifters, Pro magnum rockers, push rods, double roller, button.
52mm throttlebody-used
Parts new from Scoggin Dickey with machine work add up to $8975
Will take $7200 for all.
$3725 short block alone w/o cam.
Pls. pm with questions.
Ryan
All parts are new except throttlebody, the motor is not assembled. I will separate the top end, but not the short block since it is finish bored for the pistons, and balanced.
400 Mains Cast Iron Bow Tie Sportsman CNC
finish bored/honed to 4.125" matched to pistons
Callies 3.75" 4340 Crankshaft, Manley H beam rods w/arp 2000 bolts, Ross turbo pistons, coated by HPC balanced assembly.
Edelbrock Victor Jr. heads, polished chaimbers, cut for felpro wire lock gaskets, titanium retainers
TPIS Miniram manifold
Complete Comp hyd. roller valvetrain: Turbo cam, retro lifters, Pro magnum rockers, push rods, double roller, button.
52mm throttlebody-used
Parts new from Scoggin Dickey with machine work add up to $8975
Will take $7200 for all.
$3725 short block alone w/o cam.
Pls. pm with questions.
Ryan