modmachR
12-07-2006, 06:12 AM
I'm trying to increase my understanding of the geomitry of spindles,
I'm playing on papper and the pieces I'm coming up with for an unequal length
control arm set up ends up with a 16.5 steering axis incination with
- 1.5 camber and 2.5 caster settings. Am I close to some thing that would work on a cornering machine or should that angle be steeper?
I'm playing on papper and the pieces I'm coming up with for an unequal length
control arm set up ends up with a 16.5 steering axis incination with
- 1.5 camber and 2.5 caster settings. Am I close to some thing that would work on a cornering machine or should that angle be steeper?