sam1
11-14-2006, 08:46 PM
I am trying to change directions on my 69 Camaro, and would like sell my subframe as a complete unit - Subframe is Por15'd and completely assembled, including all steering components.
Speedtech Upper and Lower LCA's with their high end bushings and billet upper ball joint covers. QA1 coilovers with small block springs installed.
Touring Classics C5 Kit with zinc plated drilled and slotted rotors. (Also have rears for a 12 bolt if interested in a matched set).
AGR Billet Steering Box - quick ratio, all new tie rods, ball joints, with Speedtech adjusters.
DSE Subframe connectors - uninstalled.
Everything is in Austin TX, all parts are new. Will not ship, but can maybe help get it to Dallas or Houston. Ready to bolt in and go - an inexpensive and great way to upgrade without blowing the bank on a new subframe. Steering components are POR's silver, subframe is POR' black.
Parts cost New not including drum hubs, steering pcs, and subframe prep/labor: $2985
Speedtech parts: $1100
QA1's: $450
AGR Box: $400
Front C5 Brakes: $850
Subframe connectors: $185
Asking $2500 for the assembled subframe.
Please call me with any questions. Thanks, John
(512) 748-5677
Speedtech Upper and Lower LCA's with their high end bushings and billet upper ball joint covers. QA1 coilovers with small block springs installed.
Touring Classics C5 Kit with zinc plated drilled and slotted rotors. (Also have rears for a 12 bolt if interested in a matched set).
AGR Billet Steering Box - quick ratio, all new tie rods, ball joints, with Speedtech adjusters.
DSE Subframe connectors - uninstalled.
Everything is in Austin TX, all parts are new. Will not ship, but can maybe help get it to Dallas or Houston. Ready to bolt in and go - an inexpensive and great way to upgrade without blowing the bank on a new subframe. Steering components are POR's silver, subframe is POR' black.
Parts cost New not including drum hubs, steering pcs, and subframe prep/labor: $2985
Speedtech parts: $1100
QA1's: $450
AGR Box: $400
Front C5 Brakes: $850
Subframe connectors: $185
Asking $2500 for the assembled subframe.
Please call me with any questions. Thanks, John
(512) 748-5677