Does anyone know Scott Staggs in St. Paul, MN???

[ZZ3ElCamino]

Does anyone know of a guy by the name of Scott Staggs in St. Paul, MN (maybe)? He owns the '67 Chevelle below. I am desperately seeking info about it. Can anyone help??? Thanks.


http://www.lifeinwidescreen.com/siihp/scottstagschevelle.jpg

[XcYZ]

No, but I'd love to check that car out sometime. Looks like I missed it at Car Craft judging by the watermark.

[ZZ3ElCamino]

Believe me, I would love to check it out too. Knowing what parts he has (suspension) would steer me in the right direction with my project. His Chevelle sits perfect, and is the exact look I am going for with my A-body. Hopefully someone will pull through for me!

[SpeedyV10]

I saw this at Car Craft as well as on the Intro Wheel web site. Very nicely done.
I did a 'dex' search and a 'Zaba' search with no success. Are you sure that you have the owners name right?

[ZZ3ElCamino]

The title of the picture on Intro's website says "Scott Stagg's Chevelle" so I am assuming that this is the guy I am looking for. I tried to call Intro to get some information and they gave me the run around, telling me that they archive their customer files and cannot go back on search them (B.S.) I wish I could talk to him though, he would clear up a lot of questions that I have based on the look of his car.

[ZZ3ElCamino]

I've done a little more searching and I think I have narrowed Scotts location down to some where in Indiana not Minnesota. Does this maybe ring some bells with anyone?

[Alex396ss]

I´ve also been trying to get some info on that car, but unfortunately no answers yet.

I´m about to build a ´67 Chevelle too, and his stance is perfect.

Please let me know if you´ll find some info.

Alex

[Derek69SS]

Believe me, I would love to check it out too. Knowing what parts he has (suspension) would steer me in the right direction with my project. His Chevelle sits perfect, and is the exact look I am going for with my A-body. Hopefully someone will pull through for me!What exactly do you want to know? Anyone can put their car at any stance they like. For all we know, he could be running stock cut springs and a completely worn out stock suspension. You know you like his stance, but you don't know if the rest of the setup "works".

Other than his exact tire/wheel specs, there's no reason you couldn't get the same, or better advice here or at Team Chevelle.

[Alex396ss]

Does anyone know what tire/wheels-specs it might be?
17-20?

Alex

[XcYZ]

What exactly do you want to know? Anyone can put their car at any stance they like. For all we know, he could be running stock cut springs and a completely worn out stock suspension. You know you like his stance, but you don't know if the rest of the setup "works".

Other than his exact tire/wheel specs, there's no reason you couldn't get the same, or better advice here or at Team Chevelle.

There could be a lot of reasons other than what you mentioned Derek... maybe someone wants to buy it, maybe it's someone's old car, or someone grew up with him and wants to get a hold of him again, that sort of stuff. I got an e-mail yesterday a person looking for an e-mail address of one of our members. That person was surfing our site and recognized one of our members as someone that they were neighbors with when they were in grade school and wanted to touch base with them again. :thumbsup:

[Derek69SS]

There could be a lot of reasons other than what you mentioned Derek...

I read his reply, right after yours:

Believe me, I would love to check it out too. Knowing what parts he has (suspension) would steer me in the right direction with my project. His Chevelle sits perfect, and is the exact look I am going for with my A-body. Hopefully someone will pull through for me!

I guess I was just thinking that there's so many ways to achieve a stance, that the stance alone shouldn't dictate the suspension choices, and asking for help from a forum like this one will most likely generate better suspension advice than the owner of some random car you found a picture of... The guy may be very sharp, but there's also a chance he has no clue, or is unwilling to help.

[XcYZ]

I wanted to explain other reasons behind finding a person. :thumbsup:

[ZZ3ElCamino]

Well guys I did find Scott Staggs and his Chevelle and he was very helpful and knew what he was talking about. I will post a parts list from his car tonight when I get back home and have the info in front of me! :thumbsup:

[Alex396ss]

Great, looking forward to the speclist!

Alex

[ZZ3ElCamino]

Well as I said earlier today that I would post the specs to Scotts '67 Chevelle. He was more than willing to talk with me on the phone and provided me with some helpful info. In my opinion, he has one of the baddest looking '67 Chevelles around :thumbsup: . The parts list from his car is given below:

Front suspension:
QA-1 Double adjustable coil overs
Stock control arms
Hotchkis sway bar (1 3/8")
18" x 8" Intro Vistas w/stock backspace (4" ???), 225/40-18

Rear Supsension:
QA-1 double adjustable shocks
Edelbrock Trailing arms w/ adjustable uppers
Hotchkis 1" lowering springs
Hotchkis sway bar (1")
Moser 9", narrowed 1" per side
20" x 10" Intro Vistas w/ 4.5" backspace, 275/35-20

This was good to hear because I have been going in the right direction with the parts I plan on using. I have most of these parts taking up space in my spare bedroom, with plans for a Moser 12-bolt come the first of the year. Parts currently waiting for my car include:

Hotchkis front/rear sway bar kit
Baer Track kit with two piece 13" rotors front and rear
QA-1 single adjustable coil overs and single adjustable shocks (rear)
Global West trailing arms with adjustable uppers

[jeff s]

I met Scott at the Hooters in Jainsville WI on the way to CC Nats. Nice fella.
We were hauling the GTO that's in the latest issue of CC.
That 67 that won the Year One Cup with the TT ZR1 engine was pretty awesome.
In a couple weeks we're starting a 67 Chevelle project like no other.

[Alex396ss]

ZZ3ElCamino, do you know if he was interested in sharing some photos for this site?

Alex

[ZZ3ElCamino]

I told him about the Lateral-G community, however I don't know if he has checked it out yet. I will email him to see if he would be interested in posting some pics.

[Alex396ss]

Thank´s, that would be great, I´d love to see some photos of his car.

Alex

[Alex396ss]

I told him about the Lateral-G community, however I don't know if he has checked it out yet. I will email him to see if he would be interested in posting some pics.

ZZ3ElCamino, have you heard anything about the pictures?

Alex

[Mick Mc]

Come on Jeff show us some teaser pictures of the 67 Chevelle project "like no other".

Mick McMahan