DSE coil over kit with custom crossmember

[Hitman]

Here Is one of the projects on the go at our shop that I think you guys might like. Custom front crossmember with a LS1 backed with a 6 speed retaining stock floor, tunnel and fire wall. In a 1969 Camaro.

[ProTouring442]

Neat! Looks good!

Shiny Side Up!
Bill
'72 442 "Inamorata"
www.fquick.com/ProTouring442

[Hitman]

Thank you, It took alot of measuring and thinking to pull it off. It is so much easier when you can just cut floor to make it fit.

[BIG SHOOTER]

Killer work looks great, keep up the good work.What is the customer using for power & is there A/C on the car

[Hitman]

He is going to put a Novi supercharger, intercooled with meth injection. All corvette accesories. He plans on making at the wheels 850 to 900 hp with a/c.

[PT Dave]

Looks great !!
What Headers are you using on your Project Car ??

[Hitman]

We are using stainless works headers. Very nice workmanship on them.

[Datsbad]

Many times I see guys posting about cutting the floor in a 69 to fit the T-56 , However I have done this a few times and have never had to cut one yet .

[awr68]

Many times I see guys posting about cutting the floor in a 69 to fit the T-56 , However I have done this a few times and have never had to cut one yet .

I had to raise my tunnel to fit my T56 simply because I used .5" lowering body mounts...never will I do that again!!

Hitman the car looks killer!!

[Hitman]

We used stock height aluminum body mounts which helped. The problem we found was with stock steering and the corvette a/c is that you have to cut so much out of the original crossmember that there was nothing left.