Fuel tank electrical pass through

[takid455]

Looking for a pass through that can handle 20 amps.

Similar in design to the below link. This one uses MP150 terminals which are rated to 14A. Needs to a 90 deg due to tank to trunk floor clearance.


https://www.racetronix.biz/p/fs-bulkhead-connector-assembly-4-way/bca-4w

[65 Drop Top]

Have you checked out waytek yet?

[takid455]

Didn't see anything there for the cause. Component needs to be tight 90 deg out of the sending unit for clearance. Found a few straight options for single leads. Could make that work, however, trying to keep it clean looking

[OLDFLM]

This is what we used on my Firebird...

[takid455]

Pressure sensor or Alcohol content sensor?

[OLDFLM]

Pressure sensor or Alcohol content sensor?

Fuel pressure sensor for the Holley Terminator EFI we put on my 440-stroker Pontiac.