View Full Version : PowerStop C6-Z06 Trackday Brake package
Gscherer78ta
10-20-2020, 11:26 AM
This is going on my '78 Trans Am. I have been running a C5 Z06 brake package.
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/007023364607/media/1681079256744220/medium/1603202143/enhance
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/007023364607/media/1681079224501079/medium/1603202138/enhance
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/007023364607/media/1681079237149279/medium/1603202135/enhance
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/007023364607/media/1681079228236270/large/1603202126/enhance
SSLance
10-20-2020, 12:28 PM
Well...that should make a noticeable difference in braking force!
Looks like your helper approves as well.
randy
10-20-2020, 08:40 PM
Someone trying to win that 25k?
carbuff
10-21-2020, 12:33 PM
Any changes to the master cylinder as well or just the brakes? Just curious, don't know of a reason it would be needed...
Peter McMahon
10-22-2020, 05:37 AM
Greater piston area on the new calipers?
Gscherer78ta
10-22-2020, 06:23 AM
Any changes to the master cylinder as well or just the brakes? Just curious, don't know of a reason it would be needed...
I'm already running a 1" bore master, so I think that's going to work out. I don't know, there may be something I need to do with the rears to control bias.
Gscherer78ta
10-22-2020, 06:26 AM
Greater piston area on the new calipers?
Yes, like 40% more. The thing that I think I'll notice most is the heat dissipation. The brakes got very hot up a PPIR on the roval after a few laps of hard running.
Gscherer78ta
10-29-2020, 11:46 AM
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/007023364607/media/1681912386748706/medium/1603996700/enhance
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/007023364607/media/1681912341037946/medium/1603996702/enhance
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/007023364607/media/1681912397070540/large/1603996700/enhance
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/007023364607/media/1681912377278990/large/1603996710/enhance
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/007023364607/media/1681912348378047/large/1603996712/enhance
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/007023364607/media/1681912346182608/large/1603996712/enhance
https://uniim1.shutterfly.com/ng/services/mediarender/THISLIFE/007023364607/media/1681912395530379/large/1603996698/enhance
Are you running power or manual brakes? I am thinking about doing the c6 z06 brakes on my 73 Camaro and I'm trying to figure out which mc I need to go with.
BigBronco
03-15-2021, 08:09 AM
Are you running power or manual brakes? I am thinking about doing the c6 z06 brakes on my 73 Camaro and I'm trying to figure out which mc I need to go with.
If you don't already have the brackets to mount them, I would give a shout to Tobin Knighton at Kore3. Fantastic products and great tech assistance to help you get the best/correct sized master cylinder/booster/etc for the combination.
Greg,
Can you post pictures of your '02 Firehawk? I'm crazy about firebirds.....
Gscherer78ta
08-12-2021, 11:08 AM
https://uniim1.shutterfly.com/render/00-7j5h31i1qQ6WpSDUNTfSpeX9kLH0Z3DBSORzA8ZeeztDDMJxkY RNRi854g8XNKvTldMTLfbtJ__wYVBQ_4iTow?cn=THISLIFE&res=large&ts=1628791461
https://uniim1.shutterfly.com/render/00-7j5h31i1qQ6WpSDUNTfSpeX9kLH0Z3DBSORzA8Zeezu6BWaOvr qOvd5UKVqF7UUOVZV51t4MhjbEwRNyGscOgg?cn=THISLIFE&res=medium&ts=1628791419
https://uniim1.shutterfly.com/render/00-7j5h31i1qQ6WpSDUNTfSpeX9kLH0Z3DBSORzA8Zeezstg5_JoU q86EvXkBkurtsf5cYdfB3jRoL_VZILaXEufg?cn=THISLIFE&res=medium&ts=1628791386
https://uniim1.shutterfly.com/render/00-7j5h31i1qQ6WpSDUNTfSpeX9kLH0Z3DBSORzA8ZeezsWwY-JP-3PzusAgruhfRCRV7ntXQOewWgszVPDOQPWWw?cn=THISLIFE&res=large&ts=1628791397
https://uniim1.shutterfly.com/render/00-7j5h31i1qQ6WpSDUNTfSpeX9kLH0Z3DBSORzA8ZeezvAAebUEp ifgOQazRD32D1XVZV51t4MhjbEwRNyGscOgg?cn=THISLIFE&res=medium&ts=1628791478
Gscherer78ta
08-12-2021, 11:15 AM
I guess I don't know how to link pictures anymore...
camcojb
08-12-2021, 01:05 PM
I guess I don't know how to link pictures anymore...
Looks like Shutterfly won't let you link directly. If you have them on your computer use the attachment button above (looks like a paper clip) to upload them into your post.
Nice..I like it and thanks for posting! I recently got a 95 Trans am from my friend, almost for free....I will try to post pictures.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.