Nu-relic giant hole for S boots? Better way

[XLexusTech]

Looking at the install directions for my nu-relics. Its suggesting i drill a 7/8" hole in my body and doors.. I am like that a huge hole.. I dunno if I like that for two 12 gauge wires....

Does anyone have a better option for running two 12 gauge wired through the door jamb?

PS I have no door speakers. no pwer locks.. just these two wires needed.

[camcojb]

This is the smallest loom piece I found in a search. Most want a 3/4" or larger hole, this one is about 3/8" (25/64).

https://www.amazon.com/Door-Wire-Small-inside-diameter/dp/B078P6DYQM

https://images-na.ssl-images-amazon.com/images/I/61ynXluU2GL._AC_SL1200_.jpg

Google door jamb wire loom (https://www.google.com/search?q=door+jamb+wire+loom&rlz=1C1CHBF_enUS736US736&sxsrf=ALeKk01lvSXHI8o17o6IqfHjbtqVPFXqmw:159634104 5648&source=lnms&tbm=isch&sa=X&ved=2ahUKEwiDiN3n0fvqAhVRHzQIHb-GBlIQ_AUoAnoECAwQBA&biw=1242&bih=568) for several other options

[XLexusTech]

This is the smallest loom piece I found in a search. Most want a 3/4" or larger hole, this one is about 3/8" (25/64).

https://www.amazon.com/Door-Wire-Small-inside-diameter/dp/B078P6DYQM

https://images-na.ssl-images-amazon.com/images/I/61ynXluU2GL._AC_SL1200_.jpg

Google door jamb wire loom (https://www.google.com/search?q=door+jamb+wire+loom&rlz=1C1CHBF_enUS736US736&sxsrf=ALeKk01lvSXHI8o17o6IqfHjbtqVPFXqmw:159634104 5648&source=lnms&tbm=isch&sa=X&ved=2ahUKEwiDiN3n0fvqAhVRHzQIHb-GBlIQ_AUoAnoECAwQBA&biw=1242&bih=568) for several other options

Thanks Jody have you used those? if so did you make align the holes or "S" them ? I may be over complicating this .. just don't want to pinch the wires when door closes.. I think the s approaxh forces a more tolerable bend in the wire.

[camcojb]

I have not used them. I like the "S" shaped molded rubber ones, but all the ones I saw were larger holes.