ricer
07-06-2020, 07:43 AM
Item Location (City/State): Raleigh, NC
Price: 39.5K
Description: I have been building a 67 firebird with what little spare time I have had, and now my motivation to finish it is severely lacking. My spare time to be able to enjoy the car if it were finished is next to nothing with my kids activities/life so the car would just sit there. The car was completely stripped down and 99% of all the Sheetmetal is brand new (professionally done by Mizfit motorsports), and is basically a body in white. It has DSE mini tubs, subframe connectors and is all steel except the VFN 4" cowl hood. I can remove parts if you aren't interested in them or to lower the price, or remove drivetrain. The parts for it are below:
Chassis:
smith racecraft complete front end (sub, upper/lower arms, pinto rack, strange shocks, billet bbc spacer, front/mid plate, billet body mounts, billet steering arms, bump steer)
ridetech 2" drop spindles
Ron Rhodes tubular core support
Baer deep stage front brakes
Strange 1.1/8 bore MC
Chassis engineering steering column
calvert split mono's 2" drop
calvert 1" drop blocks
smith racecraft offset shackles
baer dual rear calipers
moser 9" braced
Yukon 3rd member, grizzly locker 3:50 gear, 1350 yoke, billet support
Champion beadlock wheels 15x11 15x3.5
Engine: (not assembled)
Dart Big M 9.8 904 lifters, 50mm cam
callies dragonslayer crank 4.25
oliver billet max rods with custom aged bolt upgrade
pbm morel 904 lifters
custom comp cams 50mm cam for turbo application
Brodix BB2xtra heads
supervictor intake efi
sheet metal elbow
90mm accufab t-body
Sheetmetal valve covers
ATI balancer
pac springs
jardine headers
twin Forced Induction s480 turbos 1.32
JGS 50mm wastegates
JGS BOV
Custom Chiseled liquid intercooler
a ton of misc parts silicon couplers, piping, v-bands, car trim, bolts, brackets, etc. I am sure I missing stuff but just let me know if you have any questions. Photos from the entire build are in the link below:
https://link.shutterfly.com/wG6XOl5kL2
Price: 39.5K
Description: I have been building a 67 firebird with what little spare time I have had, and now my motivation to finish it is severely lacking. My spare time to be able to enjoy the car if it were finished is next to nothing with my kids activities/life so the car would just sit there. The car was completely stripped down and 99% of all the Sheetmetal is brand new (professionally done by Mizfit motorsports), and is basically a body in white. It has DSE mini tubs, subframe connectors and is all steel except the VFN 4" cowl hood. I can remove parts if you aren't interested in them or to lower the price, or remove drivetrain. The parts for it are below:
Chassis:
smith racecraft complete front end (sub, upper/lower arms, pinto rack, strange shocks, billet bbc spacer, front/mid plate, billet body mounts, billet steering arms, bump steer)
ridetech 2" drop spindles
Ron Rhodes tubular core support
Baer deep stage front brakes
Strange 1.1/8 bore MC
Chassis engineering steering column
calvert split mono's 2" drop
calvert 1" drop blocks
smith racecraft offset shackles
baer dual rear calipers
moser 9" braced
Yukon 3rd member, grizzly locker 3:50 gear, 1350 yoke, billet support
Champion beadlock wheels 15x11 15x3.5
Engine: (not assembled)
Dart Big M 9.8 904 lifters, 50mm cam
callies dragonslayer crank 4.25
oliver billet max rods with custom aged bolt upgrade
pbm morel 904 lifters
custom comp cams 50mm cam for turbo application
Brodix BB2xtra heads
supervictor intake efi
sheet metal elbow
90mm accufab t-body
Sheetmetal valve covers
ATI balancer
pac springs
jardine headers
twin Forced Induction s480 turbos 1.32
JGS 50mm wastegates
JGS BOV
Custom Chiseled liquid intercooler
a ton of misc parts silicon couplers, piping, v-bands, car trim, bolts, brackets, etc. I am sure I missing stuff but just let me know if you have any questions. Photos from the entire build are in the link below:
https://link.shutterfly.com/wG6XOl5kL2