Baer remaster question

[waynieZ]

Hi guys, I got a new Baer remaster with the matching proportioning valve and I’m adding a line lock. They’re all new, All the lines are too. I have a Mity.vac to bleed them and was told, I could put all together and use the Mity vac and I wouldn’t need to bench bleed the master because the vac would take care of doing it. Anyone do it this way and did it work?
Thanks
Wayne

[Hydratech®]

By far the most superior method of bench bleeding a master cylinder for us has been by reverse injection, pushing fluid into the brake line ports, which then VERY conclusively pushes all of the air up and out of the MC pistons:

https://www.youtube.com/watch?v=FB8kzUEqK3U&feature=emb_logo

https://www.cardone.com/catalog/brakes/master-cylinder/10-5000mcb-brake-master-cylinder-bleeder-tool

https://www.summitracing.com/parts/AAZ-10-5000MCB

This is the secret to keeping your sanity LOL :secret::happy23: