Remote shock canisters-Where are the First Gen owners mounting them?

[Gmachine1911]

So I got a set of double adjustable JRI's and I'd like to see where you First Gen guys are mounting the remote reservoirs for the front shocks? Please post pics! Thank you!

[will69camaro]

I’ll try to get photos but basically bottom of the front sub forward if the shock and beside the tank on bottom of then frame in the rear.

[will69camaro]

I lied on front. Beside frame on inner fender. Pic shows some suspension work we were doing but shows the shock.

https://i.imgur.com/ODO1eAU.jpg

[Gmachine1911]

I lied on front. Beside frame on inner fender. Pic shows some suspension work we were doing but shows the shock.

https://i.imgur.com/ODO1eAU.jpg

That's just the kind of info I was looking for, Thank You! Do you recall what mounting bracket you used?

[will69camaro]

That's just the kind of info I was looking for, Thank You! Do you recall what mounting bracket you used?

I’m not too fancy. I used a vinyl covered strap clamp and ran a boot through it. The type you would typically use for fuel line etc.

Like this.
https://i.imgur.com/r8a0Yqd.jpg