radiator hoses

[Perry Mitchell]

Does anyone on this site have connections with a supplier for molded radiator hoses? I need an upper radiator hose for my 67 Camaro project that is powered with a Corvette LT5 engine, I want a smooth rubber molded hose like the one pictured only it needs to be 2" longer on each end. The radiator end needs to be 1 1/2'' while the lower end should be 1 3/8'', although I can make 1 1/2 '' work for both ends. I have been to the local parts stores and looked at all the hoses hanging from their rafters but the one I have is the closest one I've found. It is a NAPA hose # 7266 . Any advice or help? I don't want braided stainless steel or corrugated stainless steel. I have been looking for years!

[F'in mine]

You could try this link.
http://www.daycoproducts.com/online-catalog-1?part_type=10

You'll have to plug in the the hose end diameters, overall length & zero branches on the last bullet heading & then view the listings, hopefully at least some possibilities will come up.
Great lookup for hoses when doing a conversion.