PDA

View Full Version : rehab of my 69 project HillbillyDeluxe Build by Ironworks


jwillia2
11-14-2018, 08:47 AM
Guys,

Just wanted to share some of my build (rebuild maybe better word). After moving my car from the east coast to the west coast I found myself looking for a place to give my old 69 a little updating. A good friend of mine had had a few amazing cars built by Rodger Lee and his crew at Ironworks, so we came together and came up with a plan to give my car what it needed to bring it to the front. I should have posted more pics as the project progressed, but Rodger has done so much in 3-4 months time got away from me. Can't say enough good things about Ironworks. This has been a very positive/exciting experience as they work on the cars and keep you 100 percent involved. The plan was to


Replace Subframe and do full DSE goodies front and rear
fix all body issues and smooth firewall
install all new wiring and guages
update driveline with new T56
replace all braking system and wheels
repaint and lizard skin overside
trick out the engine bay with keeping it nice and neat
build full custom stainless exhaust
new custom interior


check out the pics at this link

https://www.flickr.com/photos/162047619@N02/shares/ip1gA7

More to come!

jcal87
11-14-2018, 10:53 AM
Wow! The detail and work in this car is amazing. I cant wait to see more.

jwillia2
11-14-2018, 11:29 AM
Thank you sir they do a great job

jwillia2
11-14-2018, 11:31 AM
http://uploads.tapatalk-cdn.com/20181114/dce2c318e5d07b2727be8cab6d5c040f.jpghttp://uploads.tapatalk-cdn.com/20181114/c3501b84600677c27caa65de9ac2029f.jpghttp://uploads.tapatalk-cdn.com/20181114/a3d99a52a276f5caa65c24fa525ad5ed.jpg

randy
11-14-2018, 01:24 PM
What headers ?

jwillia2
11-14-2018, 01:33 PM
Detroit

Sandro's 1969 502 Camaro
11-14-2018, 04:36 PM
Car looks amazing, outstanding job!

jwillia2
11-14-2018, 04:56 PM
Thank you sir ! http://uploads.tapatalk-cdn.com/20181114/399e104aa7a44b99ff38b4915edcd752.jpghttp://uploads.tapatalk-cdn.com/20181114/e2f54651e061ed000e44fb548d7b63fe.jpg

WSSix
11-14-2018, 05:05 PM
Very nice! Glad to hear you were happy with their work. Thanks for sharing to pics.

flyingv
11-14-2018, 07:52 PM
What front drive setup are you using on the LSA?

Sent from my SM-G935V using Tapatalk

jwillia2
11-14-2018, 10:10 PM
Wegner Motorsports

214Chevy
11-15-2018, 07:15 AM
Very nice!! :thumbsup::thumbsup:

ironworks
11-15-2018, 07:30 AM
Guys,

Just wanted to share some of my build (rebuild maybe better word). After moving my car from the east coast to the west coast I found myself looking for a place to give my old 69 a little updating. A good friend of mine had had a few amazing cars built by Rodger Lee and his crew at Ironworks, so we came together and came up with a plan to give my car what it needed to bring it to the front. I should have posted more pics as the project progressed, but Rodger has done so much in 3-4 months time got away from me. Can't say enough good things about Ironworks. This has been a very positive/exciting experience as they work on the cars and keep you 100 percent involved. The plan was to


Replace Subframe and do full DSE goodies front and rear
fix all body issues and smooth firewall
install all new wiring and guages
update driveline with new T56
replace all braking system and wheels
repaint and lizard skin overside
trick out the engine bay with keeping it nice and neat
build full custom stainless exhaust
new custom interior


check out the pics at this link

https://www.flickr.com/photos/162047619@N02/shares/ip1gA7

More to come!

Thanks Justin, It's been a fun process. I'm looking forward to you tearing up the streets of LA in this beast. Projects like this quick transformation are fun. Its clean, simple, and nice, but its not over the top and will be a super fun car you should be able to drive the wheels off of when we are done. I'm super proud of the transformation we have been able accomplish in less then 4 months.

I have spend many years trying to structure my business to get to the point to be able to do just this.

Thanks

badbu68
11-15-2018, 10:52 PM
Very slick!

syborg tt
11-18-2018, 06:20 AM
Car looks great and looks like it’s going to be fun to drive.


Sent from my iPhone using Tapatalk

jwillia2
11-18-2018, 04:30 PM
Yes I am gonna drive the wheels off it. The plan is to take it on the power tour next year.

jwillia2
11-24-2018, 10:18 AM
http://uploads.tapatalk-cdn.com/20181124/6302c3235f2afcbd76ab7abb7cce5d4f.jpghttp://uploads.tapatalk-cdn.com/20181124/72ae2d5af40162dc67473d89d063faa3.jpghttp://uploads.tapatalk-cdn.com/20181124/f5e0052dbfdc1743dd24678deab51272.jpghttp://uploads.tapatalk-cdn.com/20181124/7b2a43faf354952c01567bc57a35e452.jpg

Stuart Adams
11-24-2018, 10:58 AM
Wow, cool car.

jwillia2
11-24-2018, 11:47 AM
Wow, cool car.

Thanks Stuart! its just a cheap version of your car :lol:

waynieZ
11-28-2018, 07:21 PM
Wow that paint is amazing!! I love it.

jwillia2
11-29-2018, 11:49 AM
Wow that paint is amazing!! I love it.


Thanks ! It turned out very nice.

http://uploads.tapatalk-cdn.com/20181129/215851ca30645676ce57697b8a1bf565.jpg

ironworks
11-29-2018, 12:30 PM
Wow that paint is amazing!! I love it.


Would be way cooler if it was Orange. Just saying

ironworks
11-29-2018, 12:30 PM
Thanks ! It turned out very nice.

http://uploads.tapatalk-cdn.com/20181129/215851ca30645676ce57697b8a1bf565.jpg


All that there is the seat to legally carry a T rex in the back seat of the car. HAHA

waynieZ
11-29-2018, 08:37 PM
Roger is the car still at your shop? Do you have any pictures of how you got the heat exchanger on the passenger side to fit with the RS doors? Did you run tubing down to the bottom of the Radiator support and go under? Any help would be appreciated.

ironworks
11-29-2018, 09:41 PM
Roger is the car still at your shop? Do you have any pictures of how you got the heat exchanger on the passenger side to fit with the RS doors? Did you run tubing down to the bottom of the Radiator support and go under? Any help would be appreciated.

We actually reused the cooler and mount Justin made when he built the car the first time. The intercooler pump under the old battery tray has been the tougher deal to route.

jwillia2
11-30-2018, 08:07 PM
We actually reused the cooler and mount Justin made when he built the car the first time. The intercooler pump under the old battery tray has been the tougher deal to route.


When I built the car the second time [emoji23]

syborg tt
12-01-2018, 08:26 PM
Man I love this car !!!!


Sent from my iPhone using Tapatalk

jwillia2
12-01-2018, 08:59 PM
Man I love this car !!!!


Sent from my iPhone using Tapatalk


Thanks it’s got a lot of good parts on it and the craftsmanship shows. Doesn’t have any fancy body mods but GM did a good job as is in my opinion. Rodger has done a great job making it ready to pound on and not have any worries about drivability which was a big concern. I like to enjoy my cars not just look at them.

gofastwclass
12-02-2018, 05:20 AM
I like to enjoy my cars not just look at them.

These are the best kind!
Speaking of... are you enjoying this beast yet? It looks awesome.

jwillia2
12-02-2018, 08:10 AM
These are the best kind!

Speaking of... are you enjoying this beast yet? It looks awesome.


Not yet hopefully it will be running this week!

gofastwclass
12-02-2018, 09:10 AM
That will be very cool. I can only imagine how excited you must be for an early holiday present.

You will need to make sure to let some smoke out of the tires from time to time, it helps the blues go away and puts a smile on your face. ...at least it works that way for me. :D

jwillia2
12-06-2018, 12:24 AM
Getting closer


http://uploads.tapatalk-cdn.com/20181206/1aea87d7c3f73f2e2f9039e903ee1498.jpghttp://uploads.tapatalk-cdn.com/20181206/bd69f3f40f6c0b5615a357e5a45ecea8.jpg

Gmachine1911
12-06-2018, 04:54 AM
Congrats on a beautiful car! Love that you kept the body true to form and you can never go wrong with a black car with a straight body! Keep the updates coming. I love the Ironworks jack stands, btw...may they would throw those in as a "Christmas/Customer Appreciation" gift, hint, hint!!:poke:

ironworks
12-06-2018, 07:05 AM
Congrats on a beautiful car! Love that you kept the body true to form and you can never go wrong with a black car with a straight body! Keep the updates coming. I love the Ironworks jack stands, btw...may they would throw those in as a "Christmas/Customer Appreciation" gift, hint, hint!!:poke:

I got him a hood latch for Christmas, Shhh dont tell hit it's a Christmas secret.

jwillia2
12-06-2018, 01:24 PM
Haha custom one bet

jwillia2
12-08-2018, 09:46 PM
Few pics I grabbed today http://uploads.tapatalk-cdn.com/20181209/1bca60de944ed09fad24fa3b18957a3a.jpghttp://uploads.tapatalk-cdn.com/20181209/2970a28969158735a9edd3afc818b957.jpghttp://uploads.tapatalk-cdn.com/20181209/d824f66f79738a18bb3840e2f4b3f0ca.jpghttp://uploads.tapatalk-cdn.com/20181209/faeb7e4dbc018577c656cc8bc847f3bd.jpghttp://uploads.tapatalk-cdn.com/20181209/307226ff075d4dd8423314715c0d61d6.jpghttp://uploads.tapatalk-cdn.com/20181209/32f2fcbce69befc7dc4e2dc0cf678f17.jpghttp://uploads.tapatalk-cdn.com/20181209/7a43c9bf00934db428da274cb105f5d6.jpghttp://uploads.tapatalk-cdn.com/20181209/8bedf99e19ba878990e62df3eba7cc13.jpghttp://uploads.tapatalk-cdn.com/20181209/1ab9f53df9485bdd18af12100e1a3ef9.jpg

jwillia2
12-19-2018, 05:19 PM
http://uploads.tapatalk-cdn.com/20181220/bbf7ae4386fd18343165db0efda977ca.jpghttp://uploads.tapatalk-cdn.com/20181220/b476acd57814eb09ce0f36cb951a903c.jpg

Stuart Adams
12-19-2018, 08:10 PM
Cool car.
Great stance.

Ummgawa
12-20-2018, 09:54 PM
Wicked ride. Paint, motor, suspension, wicked.

Sandro's 1969 502 Camaro
12-20-2018, 10:08 PM
Thats one sweet looking 69 Camaro. Great build!

jwillia2
12-20-2018, 10:57 PM
Thanks guys it’s looking like it will be done very soon. Hope to get it out and put some real miles on it.

joeko23
12-21-2018, 06:30 AM
What kind of headlights are those? They look great!

Josh@Ridetech
12-21-2018, 07:08 AM
Beautiful build. Rodger does a great job.

jwillia2
12-21-2018, 07:47 PM
What kind of headlights are those? They look great!


jw speaker

jwillia2
12-21-2018, 07:49 PM
Beautiful build. Rodger does a great job.


Rodger is straight up. He has a great eye, and a great team behind him. The experience has been phenomenal.

ironworks
12-21-2018, 10:28 PM
Rodger is straight up. He has a great eye, and a great team behind him. The experience has been phenomenal.

Thanks but you forgot awesome mountain bike rider. Let’s just state the obvious.

jwillia2
12-22-2018, 07:09 AM
Awesome E Mountain Biker [emoji23]

dhutton
12-22-2018, 08:56 AM
Don’t forget spectacular race car driver....

Don

jwillia2
12-22-2018, 11:22 AM
haha I have heard that!

:gitrdun:

Ron in SoCal
01-10-2019, 07:50 PM
Beautiful car! Hope to see you running the streets (and Streets) soon.

:cheers:

gmc427
01-18-2019, 04:36 AM
Thanks guys it’s looking like it will be done very soon. Hope to get it out and put some real miles on it.

hi,nice car!what size wheel/tire combo?regards

jwillia2
01-20-2019, 07:55 AM
hi,nice car!what size wheel/tire combo?regards


18x 9.5 and 19x12s
275. 325

cjfirstgen
01-20-2019, 09:52 AM
http://uploads.tapatalk-cdn.com/20181209/faeb7e4dbc018577c656cc8bc847f3bd.jpg

Looks great!

Where did these subframe connector brackets come from? Custom from Ironworks?

jwillia2
01-20-2019, 06:27 PM
Looks great!



Where did these subframe connector brackets come from? Custom from Ironworks?


Yes I believe this is something they make. Rodger May chime in.

jwillia2
02-08-2019, 06:00 AM
68340https://uploads.tapatalk-cdn.com/20190208/aae4192feba20180742ad5159f8b9498.jpghttps://uploads.tapatalk-cdn.com/20190208/8fbca3b0d323304e9e94116fd6822d48.jpg


Sent from my iPhone using Tapatalk

jwillia2
02-18-2019, 07:57 PM
https://uploads.tapatalk-cdn.com/20190219/d15164ae7adc6bda39538bb475850da7.jpghttps://uploads.tapatalk-cdn.com/20190219/1dc78748a3476c4213e3692980e98445.jpg


Sent from my iPhone using Tapatalk

waynieZ
02-18-2019, 09:47 PM
Nice progress! Those seats will hold you in place. Do you have any pictures of where the cold air intake goes through to where the filter is under the fender? I'm looking for ideas. Maybe a shot from the passenger side? Thanks.

jwillia2
02-19-2019, 10:57 AM
Nice progress! Those seats will hold you in place. Do you have any pictures of where the cold air intake goes through to where the filter is under the fender? I'm looking for ideas. Maybe a shot from the passenger side? Thanks.



Thanks here ya go https://uploads.tapatalk-cdn.com/20190219/1e111d7ebbc1a61c8a7eeaa1a9054df9.jpghttps://uploads.tapatalk-cdn.com/20190219/af2b0072b655fab9e2374daebe326122.jpg


Sent from my iPhone using Tapatalk

waynieZ
02-19-2019, 11:07 AM
Thank you.

hdduramaxman
02-20-2019, 09:37 PM
Very nice work! All of the good stuff stuffed into the right kind of car :thumbsup:

NickBurns
02-21-2019, 08:38 AM
Looks great!

Where did these subframe connector brackets come from? Custom from Ironworks?

This is a beautiful setup.. Exactly what I was thinking.....

jmac
02-21-2019, 11:54 AM
Amazing car! Is that the Autorad core support and their radiator/shroud combo?

Looks great in black! If so, have any more pics?

Thanks!

ironworks
02-21-2019, 12:09 PM
This is a beautiful setup.. Exactly what I was thinking.....

Amazing car! Is that the Autorad core support and their radiator/shroud combo?

Looks great in black! If so, have any more pics?

Thanks!

The subframe connectors are just something we came up with that was cleaner and didn't have such long thru bolts. I'm sure we could make some more I would have to figure out pricing I have no idea how long they took to make off hand.

The core support is an auto rad unit that went to the powder coater straight out of the box. The under hood is pretty simple for a 5-6 month project. The car was mini tubbed when we got it and we just scuff and shot the car fixing some issues to make it straight again. The car will be a super fun car to drive and take his family out in. Justin still wants to figure out all the interior stuff he wants to geek out on further down the road. But spring time is coming so he needs to hit the road.

jmac
02-21-2019, 12:53 PM
Thanks for the quick reply!

How's the quality of the Autorad setup? Any fitment issues or problems lining up the front sheet metal?

ironworks
02-21-2019, 01:40 PM
Thanks for the quick reply!

How's the quality of the Autorad setup? Any fitment issues or problems lining up the front sheet metal?


We have sold and installed them for many years. I have never had one issue with anything not fitting or being out of wack. Those guys build nice stuff. 70% of the cars we build use their stuff and we sell quite a few each year. And no telling how many of those my wife sells each year. A bunch.

Just be prepared to wait a little while. They are all custom built to order.

Dave95z28
02-22-2019, 02:43 PM
We have sold and installed them for many years. I have never had one issue with anything not fitting or being out of wack. Those guys build nice stuff. 70% of the cars we build use their stuff and we sell quite a few each year. And no telling how many of those my wife sells each year. A bunch.

Just be prepared to wait a little while. They are all custom built to order.

Have you ever used their heat exchanger and condenser package? I have an LSA going in my 69 and I haven’t bought a heat exchanger yet. I like the idea of using their heat exchanger and condenser assembly as one nice stack designed to work together, but I don’t know how efficient their exchanger is compared to other options.

ironworks
02-24-2019, 04:20 PM
Have you ever used their heat exchanger and condenser package? I have an LSA going in my 69 and I haven’t bought a heat exchanger yet. I like the idea of using their heat exchanger and condenser assembly as one nice stack designed to work together, but I don’t know how efficient their exchanger is compared to other options.

I have never gotten a package like that that ever clears everything the way I want and gets the best air flow. Everyone does everything different so I always mount my own.

jwillia2
02-25-2019, 08:59 PM
https://uploads.tapatalk-cdn.com/20190226/dc6aed02baf20015a3253d3912f2ce85.jpghttps://uploads.tapatalk-cdn.com/20190226/32b04b82e1f33b2de06a988e31229ce6.jpg


Sent from my iPhone using Tapatalk

jcal87
02-26-2019, 08:15 AM
https://uploads.tapatalk-cdn.com/20190226/dc6aed02baf20015a3253d3912f2ce85.jpghttps://uploads.tapatalk-cdn.com/20190226/32b04b82e1f33b2de06a988e31229ce6.jpg


Sent from my iPhone using Tapatalk

Wow, that is sexy.

waynieZ
02-26-2019, 01:02 PM
It looks laser straight! Beautiful.

NickBurns
02-26-2019, 02:06 PM
https://uploads.tapatalk-cdn.com/20190226/dc6aed02baf20015a3253d3912f2ce85.jpghttps://uploads.tapatalk-cdn.com/20190226/32b04b82e1f33b2de06a988e31229ce6.jpg


Sent from my iPhone using Tapatalk



That looks beautiful !


Sent from my iPhone using Tapatalk

jwillia2
02-26-2019, 07:22 PM
https://uploads.tapatalk-cdn.com/20190227/18d36e324e163c732e235b01d2ff1be8.jpg


Sent from my iPhone using Tapatalk

NickBurns
02-26-2019, 07:56 PM
https://uploads.tapatalk-cdn.com/20190227/18d36e324e163c732e235b01d2ff1be8.jpg


Sent from my iPhone using Tapatalk



What do you have going on here ?


Sent from my iPhone using Tapatalk

DOOM
02-26-2019, 08:09 PM
I can't put my finger on why I think this car is so badazz!!:D

jwillia2
02-26-2019, 08:12 PM
What do you have going on here ?


Sent from my iPhone using Tapatalk



Power window switches in the ash tray area.


Sent from my iPhone using Tapatalk

jwillia2
02-26-2019, 08:12 PM
I can't put my finger on why I think this car is so badazz!!:D



It’s a black 69 camaro can’t go wrong right [emoji23]


Sent from my iPhone using Tapatalk

jwillia2
03-02-2019, 03:38 PM
https://uploads.tapatalk-cdn.com/20190302/5a9f75c88489346148a99e6ff1de74e0.jpg


Sent from my iPhone using Tapatalk

NickBurns
03-02-2019, 03:38 PM
https://uploads.tapatalk-cdn.com/20190302/5a9f75c88489346148a99e6ff1de74e0.jpg


Sent from my iPhone using Tapatalk



Looking HOT —-


Sent from my iPhone using Tapatalk

NickBurns
03-02-2019, 07:17 PM
What color are the wheels ? [emoji848][emoji3166]

They go so well with the black


Sent from my iPhone using Tapatalk

jwillia2
03-03-2019, 09:26 AM
What color are the wheels ? [emoji848][emoji3166]

They go so well with the black


Sent from my iPhone using Tapatalk



Stock bronze forgeline color


Sent from my iPhone using Tapatalk

jwillia2
03-09-2019, 09:26 PM
Running the streets doing some final tweaks to the the tune. https://uploads.tapatalk-cdn.com/20190310/96eb6b6a6c6898a546d37e78f739ce65.jpg


Sent from my iPhone using Tapatalk

tubbed69
03-10-2019, 05:56 AM
Beautiful car,time to ride and enjoy:king:

Stuart Adams
03-10-2019, 07:55 PM
Looks fanatastic

jwillia2
03-13-2019, 06:01 PM
Rodger and the team getting it dialed in. (The bar is removable)




https://uploads.tapatalk-cdn.com/20190314/4f9e90623e725c5bdf9cd1adb98b553e.jpghttps://uploads.tapatalk-cdn.com/20190314/ff8f85ab2e73a9a96b86abfe172b41ec.jpghttps://uploads.tapatalk-cdn.com/20190314/370f693fc34db1f790ed93717794fe1c.jpg


Sent from my iPhone using Tapatalk

jwillia2
03-16-2019, 01:02 PM
https://uploads.tapatalk-cdn.com/20190316/5d4b5a1be12d0b5ef2d1657fdec4a650.jpghttps://uploads.tapatalk-cdn.com/20190316/ed1290e9216cf59bc141131343f76e8e.jpghttps://uploads.tapatalk-cdn.com/20190316/54fc80d0cbf187956371e28bbed6e64a.jpghttps://uploads.tapatalk-cdn.com/20190316/45ce194cccd84873e7f2aca93440cb57.jpghttps://uploads.tapatalk-cdn.com/20190316/5b9d6b6a219242a83cc615a4b31eb694.jpghttps://uploads.tapatalk-cdn.com/20190316/c8ba4398535ce3fef26ab0b71b7c0bc9.jpg


Sent from my iPhone using Tapatalk

NickBurns
03-17-2019, 07:51 PM
https://uploads.tapatalk-cdn.com/20190316/5d4b5a1be12d0b5ef2d1657fdec4a650.jpghttps://uploads.tapatalk-cdn.com/20190316/ed1290e9216cf59bc141131343f76e8e.jpghttps://uploads.tapatalk-cdn.com/20190316/54fc80d0cbf187956371e28bbed6e64a.jpghttps://uploads.tapatalk-cdn.com/20190316/45ce194cccd84873e7f2aca93440cb57.jpghttps://uploads.tapatalk-cdn.com/20190316/5b9d6b6a219242a83cc615a4b31eb694.jpghttps://uploads.tapatalk-cdn.com/20190316/c8ba4398535ce3fef26ab0b71b7c0bc9.jpg


Sent from my iPhone using Tapatalk



I see more and more going with manual brakes ?


Sent from my iPhone using Tapatalk

jwillia2
03-17-2019, 07:52 PM
I see more and more going with manual brakes ?


Sent from my iPhone using Tapatalk



They work great


Sent from my iPhone using Tapatalk

NickBurns
03-17-2019, 07:55 PM
They work great


Sent from my iPhone using Tapatalk



In tempted - I love the clean look !


Sent from my iPhone using Tapatalk

jwillia2
03-17-2019, 08:04 PM
In tempted - I love the clean look !


Sent from my iPhone using Tapatalk



That with the rain gear wiper setup is the best


Sent from my iPhone using Tapatalk

jwillia2
03-22-2019, 04:00 PM
Rodger and the crew KILLLED it. This car drives amazing! 7 months to this is just insane.

Musclerodz
03-22-2019, 04:17 PM
Nice!!!!!

waynieZ
03-22-2019, 05:24 PM
"This car drives amazing!" And looks just as nice!

jwillia2
03-24-2019, 04:33 PM
https://uploads.tapatalk-cdn.com/20190324/907052fca9d6c7c47d254fa388539ab6.jpg


Sent from my iPhone using Tapatalk

69Ryan
03-27-2019, 05:59 PM
Awesome Car!!

WSSix
03-28-2019, 07:01 PM
Turned out great! Love those wheels with the side reliefs on the spokes.

69hugger
03-29-2019, 07:14 AM
Pure Sweetness!! Stunning!

jdeliveryguy
04-01-2019, 08:51 AM
Can't stop starring at it, beautiful, wouldn't change a thing

Revolutionary
04-02-2019, 08:05 PM
Absolutely beautiful build taking notes for one we are working on at my shop now.

jwillia2
04-08-2019, 10:28 PM
The hillbillydlx got some love at Del Mar.


https://uploads.tapatalk-cdn.com/20190409/f4a1eaf5289ef46dce304304046007ac.jpg


Sent from my iPhone using Tapatalk

fleetus macmullitz
04-10-2019, 08:35 AM
The hillbillydlx got some love at Del Mar.


https://uploads.tapatalk-cdn.com/20190409/f4a1eaf5289ef46dce304304046007ac.jpg


Sent from my iPhone using Tapatalk

Congrats!

Well deserved. :thumbsup:

waynieZ
04-10-2019, 11:55 AM
Congratulations! Well deserved.

Rick2964
04-13-2019, 12:01 PM
Justin great meeting you at GoodGuys Del Mar. And thank you for letting me ask a bunch of questions and take detailed pics. This car is phenominal in person! Quality of this car is off the hook. Congrats on the award!!

Rick

jwillia2
04-16-2019, 01:11 PM
Justin great meeting you at GoodGuys Del Mar. And thank you for letting me ask a bunch of questions and take detailed pics. This car is phenominal in person! Quality of this car is off the hook. Congrats on the award!!



Rick



Thanks Rick anytime you need help let me know


Sent from my iPhone using Tapatalk