69 camaro dash

[prolificdesigns]

what modifications are needed to put a nova dash pad in a 69 Camaro? im wanting to remove the clock bump out in the Camaro dash to fit a holley efi dash in DSE dash. it would look much cleaner if the dash pad was just flat and didn't have the clock bump out.

if somebody has done it and has pictures that would be awesome.

[Sheck44]

yes, I did it ...
Starts here

http://lateral-g.net/forums/showthread.php?t=54654&highlight=Intense&page=3

let me know if you have any questions

Cheers
Steve

[prolificdesigns]

Awesome build, looks like you had to modify the top right corner of the dse dash to make it have smooth transition, is that all. Also I've read I'll also need nova a pillars is that correct too.

[Sheck44]

Yes, using the nova dash pad there will be a gap on the top right, we also modified the nova pad to extend down into that corner as well. Also, we extended the connection stud on the back so we could get a good amount of stud to connect ... VERY tight fit and you want to pull it in for a proper fit.

We used TMI pillars ... also VERY tight but we messaged it to fit

Cheers
Steve