1st gen - 2nd gen leaf spring differences?

[T/AAddict]

Are the leaf springs interchangeable between the 1st and 2nd gen f-bodies?

[DEIGuy38]

you could call landrum springs and see what they say

https://landrumspring.com/products/leafsprings/chevrolet-multi-leaf-springs/

[*rayman*]

Dunno if it helps you to confirm, but i've noticed previously that DSE list the same part numbers for 1st gen and second gen for their drop springs.

[T/AAddict]

That was what confused me... Some that I saw had the same part #s from 67-81 and some not. I know there were different spring rates due to weight throughout the years.

I had considered using some Hotchkis leafs that I bought for my 79 T/A on my newly acquired 69 Firebird when it arrived but oops I wound up putting them on the 79 this weekend. Guess I'll just start shopping for 69 specific items.

[ADY]

I'll have a used (6,000 miles) set of DSE leafs, off-set shackles, Cal-trac bars for sale in a month (swapping out for a RideTech 4-link).

[T/AAddict]

I'll have a used (6,000 miles) set of DSE leafs, off-set shackles, Cal-trac bars for sale in a month (swapping out for a RideTech 4-link).

sounds good, might just be about the right time too...... I'll keep my eyes open.

[*rayman*]

I'll have a used (6,000 miles) set of DSE leafs, off-set shackles, Cal-trac bars for sale in a month (swapping out for a RideTech 4-link).

How'd you find the caltracs with the multileaf springs?

Interested in selling the Caltracs separately?

[ADY]

I bought the car with the setup already installed, believe this is the same part:
http://www.calvertracing.com/store/caltracs-2301-low-profile-1-hole-p-141.html

Once I get the new 4-link installed and clean up the parts I'll post up the parts.