1984 Camaro Twin Turbo

[1984 camaro]

First post I have a 1984 camaro with a Nelson Racing Twin Turbo 427 small block 1800hp,Electromotive Tec 3 engine management system, Billet intake manifold (with 16 injectors) and billet valve covers,Ron Davis radiator and inter-cooler,Custom built 4L80E transmission with TCI controls, Ricks hot rod shop duel pump stainless fuel tank, Aeromotive fuel pumps, Aje tubular K member, Spohn suspention upgrades, Moser 9 inch 35 spline, Lemmons duel 3 inch stainless oval exhaust, Full roll cage and frame mods, Baer brakes, 18 X 10 and 18" x 12" Fikse wheels, 345 rear rubber, Air conditioning, power windows, power mirrors, power locks, plus many more goodies. The guy in pic is Tom Nelson. Paint, Body, Engine compartment fabwork, Interior and assembly was done by myself. Tom is doing the engine, plumbing, Intake, mini tubbing, and 80e install. Thanks to my sponsors Ricks hot rod shop, Optima batteries, Nelson racing engines



Randy Davis

[XcYZ]

Wow, awesome! Welcome to the site. :thumbsup:

What booth will it be in at SEMA?

EDIT: I thought that your car looked familar, I went and looked in my past pics and I took this at Car Craft 2 years ago.

[1984 camaro]

Yea, thats the very same car. pre turbo.

[rwhite692]

Very Nice work. Plumbing is nicely done. Keep the updates and photos coming!

[MarkM66]

Looks great.

Do you think that 4L60E will last longer then one launch behind 1500 hp, ;) .

[Payton King]

I bet that thing is a handful to drive

[J2SpeedandCustom]

Very Nice. You wouldn't expect that car to be that...COOL! :thumbsup:

[ArisESQ]

that is easily the nicest third gen camaro on the face of the planet. easily.

[GeoffP]

Awesome...can't believe that's an 84. I'm a sucker for 3rd gen Camaros (I own one).

GeoffP
87 Camaro Z28 LT1/4L60E
68 Camaro LT1/T56 in progress

[1984 camaro]

Looks great.

Do you think that 4L60E will last longer then one launch behind 1500 hp, ;) .
It should last a couple of times. The transmission shop built up all the weak points with hand build parts only time will tell. The 80e would be a better choise but i would have to cut the tunnel

[Speedster]

That is a beautiful ride you have there. The plumbing installations are pristine. Nice job !! Gotta love that Nelson engine combo too...

[Colvindesign]

that's a beautiful car. I want to do a rendering of a 82+ berlinetta style Camaro without ground effects with large wheels. I'll be sure to do a version with ground effects too, cause your car looks awesome.

[1984 camaro]

Thanks for all your interest I posted a couple new pics. I will be posting more as the progres continues. I will also let you know wich booth at sema.

[hotwheels]

wow, that is bad ass man..........love that turbo set up.

[Bowtieracing]

Is that best ever fuel system !!!! :hail:

[1984 camaro]

All the hard lines are getting polished, And the exhaust will be coated in ceramic silver. The tail pipes are hand built 4 inch mufflers they look pretty cool. Tom nelson will have the camaro on his web page soon the first of his new Nelson Racing Supercars

[platinumgta]

Any interior shots? Did you guys do anything special inside?

[1984 camaro]

The only shot I have is from the hatch. I do have some with the roll cage with the doors open but no interior. The interior is mostly bone stock with the countour package. that may change at a later date. I will get some from the sides but it will take some time the car is in california

[shawn18jgr]

Awesome car! Email me anytime! Third Gens do rock! Check out mine below. Feel free to email me [email protected]
http://www.cardomain.com/ride/2261839

http://memimage.cardomain.net/member_images/5/web/2261000-2261999/2261839_19_full.jpg

http://memimage.cardomain.net/member_images/5/web/2261000-2261999/2261839_36_full.jpg

http://memimage.cardomain.net/member_images/5/web/2261000-2261999/2261839_37_full.jpg




http://memimage.cardomain.net/member_images/5/web/2261000-2261999/2261839_22_full.jpg

[1984 camaro]

Go to nelson racings site the camaro is in there

[Bandit Ls-1]

wow man awsome car and the true duals look amazing, hows the ground clerance on those?

[Bowtieracing]

Awsome work!! I remember seeing pics of your excellent pluming some time a go. Can you tell me where did you get the stainless tubing and wich tools did you use ? I know not all benders and flaring tools wont handle stainless .

[1984 camaro]

wow man awsome car and the true duals look amazing, hows the ground clerance on those?
The ground clearence is as good if not better than stock the pipes are oval witch is a big help

[1984 camaro]

Awsome work!! I remember seeing pics of your excellent pluming some time a go. Can you tell me where did you get the stainless tubing and wich tools did you use ? I know not all benders and flaring tools wont handle stainless .
The stainless work was done by Nelson and does need tools which most of us dont have

[1984 camaro]

I am now adding a 80E transmission the car will be running mid-high eights next spring. Wanted extra insurance

[jeff s]

When's it gonna be done? Changing the trans, maybe a week or so?

[Jr]

I can't stop looking at this camaro...Where can I find the overall car specs?

[1984 camaro]

When's it gonna be done? Changing the trans, maybe a week or so?
The camaro will be done by spring the intake has been a lot of work months and months. Once that is complete the rest can be done most of all the little stuff is done fuel,brake,hydro-boost and transmission lines the 80e will take 2-3 weeks to get built and about another week to cut tunnel after i have transmission. Hang in there it will be at the shows next season
Randy

[1984 camaro]

I can't stop looking at this camaro...Where can I find the overall car specs?
Chevy High Performance will be doing a full artiacle on the car and will cover the entire project.But that is still a few months away. I will post updates as they happen and also check on nelsons site he will have pics of engine and the dyno run later on. The billet intake is the first of its kind and expected to be done in the next few weeks. I will keep you guys up to speed as progress continues :thumbsup:

[tones2SS]

WOW!!!!
BEAUTIFUL and with all the goodies!!! VERY NICE!!!! :thumbsup: :thumbsup:

[FSTFBDY]

mmm, drool.. ( had to reregister dono what happen to my old account)

Just wanted to say WOW is that one of the best 3rdgens Ive seen !!

TWO THUMBS UP !!

[TTOP350]

Very nice and clean !:yes: :thumbsup: :hail:

Im working on getting my close to that but mines a bird :unibrow:

[Kory 88Iroc Lt1]

Beautiful car. Do you know when the article in chp will run. I need to resubscribe.
Once again very nice.
Kory

[87IROC350]

Who's roll cage or is it custom? Nice fit.

[1984 camaro]

Who's roll cage or is it custom? Nice fit.
The cage was a custom job with a frame tighed in. The cage work was done by competiton research & development of milwaukee

[1984 camaro]

Beautiful car. Do you know when the article in chp will run. I need to resubscribe.
Once again very nice.
Kory I will post you all when the article will run.
Thanks

[1984 camaro]

The 80e is in and the car is getting 345 rubber on rear :thumbsup:

[87IROC350]

Did the 80E fit without cutting the tunnel. I'm in the same boat now and considering going that route.

[1984 camaro]

Yes it fits in tunnel but you have to modify the tail end, new trans mount and shorten your tourque arm since the 80e is longer

[Aschle]

Amazing ride !!! Please post updates as they come !!

Jason

[Aschle]

How do you plan to put 345's on a thirdgen? Without some serious work, they would stick out way past the fender... Please let us know..

You a member of www.thirdgen.org by chance?

Jason

[1984 camaro]

The car is getting mini tubbed and yes I am a member of third gen under 1984 camaros. The car was in paso robles at lemmons headers a few months ago

[Aschle]

The car is getting mini tubbed and yes I am a member of third gen under 1984 camaros. The car was in paso robles at lemmons headers a few months ago


To my knowledge, we can't "mini tub" our thirdgens due to the coil spring location.... I hope you can prove this wrong. Too bad I was unaware of the car here in town, I LOVE seeing nice thirdgens due to them being so few and far between...

Jason

[1984 camaro]

Yes you have to change springs, shock mounts and lower control arm mounts

[1984 camaro]

Some pics of 80e in the camaro :woot: It fit without much work the tunnel was not cut.

[Henry D]

Some pics of 80e in the camaro :woot:

I was underneath the car a few weeks ago and saw the mini tub work in progress. Looks good and I can't wait to shoot it after its finished. :thumbsup:

Regards,
H

[Speedster]

Saw the Camaro out at Nelson's shop Monday. Lookin' good !!

[1984 camaro]

Thanks. I have not seen the camaro since jan of 2006 when it was shipped from my shop to toms. Only pictures he e-mails. Tom is one of a kind.

[Speedster]

Yeah, he is one mental puppy. Turbos, intakes and those Converse sneakers...lol. One of the times I fly out, it'd be great to see your car run. He told me some of the sick things you are doing to it. Definitely a clean and sneaky ride. I am sure you surprise the heck out of some people.

[1984 camaro]

Yep keep it stock looking has been my number one. It has been lots of waiting but the car will be first of its kind. I can let you know when its complete. Again thanks for your imput.:thumbsup: And mite I say thats one fine ride you got
Randy

[californiacuda]

Fantastic ride. Do you know if there are SFI approved flex plate and scatter shields available for the 4l80e? Also, what rear end gear are you planning to run?

[awr68]

Nice ride Randy!! My Dad is the first and only owner of a very clean '85 Z28 that is white w/ red interior and a 350 crate motor....your car gets me thinking of the posibilites!! :)

[1984 camaro]

Fantastic ride. Do you know if there are SFI approved flex plate and scatter shields available for the 4l80e? Also, what rear end gear are you planning to run? Rear ratio is 3.50 with a locker

[1984 camaro]

Again thanks to all of you and your interest in the camaro I am looking forward to showing her this summer and anyone feel free to stop and check her out.:D

[jonny51]

Very nice camaro:thumbsup:

Where do you plan on showing it at?

[1984 camaro]

Tom nelson will show the car in california first After that it will get shipped home Then I will take it to car craft summer nats in Mn , hot rodpower tour, plus other major shows in the mid west, And a good chance at sema in 2007

[steveo346]

very nice and clean car indeed, gotta love the fikse and twin turbos:D

[surreyboy]

best third gen ive seen

[syborg tt]

The car looks really nice

?? who's y-block is this

http://www.lateral-g.net/forums/attachment.php4?attachmentid=4330&d=1155402029

[1984 camaro]

Nelson fabed the y block. The flares are welded in and then polished. The block started as a aeromotive part

[syborg tt]

Nelson fabed the y block. The flares are welded in and then polished. The block started as a aeromotive part

Thank you

[1984 camaro]

Here is a picture of the 345s tucked under the camaro and added pic of tin work.

[Kory 88Iroc Lt1]

That looks great! Just tucked under the right amount. Do you happen to have any pics of the sheetmetal work required to make them fit?
Very nice.
Kory

[1984 camaro]

The sheet metal work is not done yet. But they are working on it so I will post pics soon. The full interior will be in place only a slight mod to lower seat

[jonny51]

Looks very nice:thumbsup: I had a '91 but it never looked like that!

[Kory 88Iroc Lt1]

Looking foreward to more pics. So far it looks great.
Kory

[Diognes56]

That is one wicked 3rd gen :bow: .

David

[wills55]

this is one of the nicest 3rd gens i have ever seen, and probably the one with the most street driven power i have ever seen. awesome car keep the pics coming!:thumbsup:

[1984 camaro]

Here is a picture of the 345s tucked under the camaro and added pic of tin work.
I added a pic of the tin work it is not complete but gives you a idea how they fit

[1984 camaro]

That looks great! Just tucked under the right amount. Do you happen to have any pics of the sheetmetal work required to make them fit?
Very nice.
Kory
Kory I posted pic of the tin work so now you can do your third gen
Randy

[Steve Chryssos]

What a freakin awesome car! :yes:

[1984 camaro]

Just adding a pic of the tubs from the back

[Neil B]

Just adding a pic of the tubes from the back

Awesome car. Just curious, what are your plans for the interior trim panels over the tubs?

[1984 camaro]

Awesome car. Just curious, what are your plans for the interior trim panels over the tubs?
Most of the panels fit we only had to do some trimming those areas will get carpet ? The camaro is getting the interior put in in the upcoming weeks At that time I will post pics
Thanks Randy

[1fas92]

Hello
I wanted to say once again, very nice thirdgen camaro. I have a 1992 z28 with very similar goals in progress. You have more than exceeded what i am trying to do. But I love the progress that you are making. What size turbos are you running now? I am either going to run a couple of t60-1's or t70's. Do you have any more motor pics ready yet? And is that ecm better than the fast system or big stuff 3? I am currently running the fast ecm on mine. Once again great looking car..............

keep the updates coming....................

later,
Robbie Sheffield
1fas92

[Aschle]

Looks outstanding !!! Do you have any pictures of how the rear suspension was reworked to give you that kind of room? That is the one modification I have been wanting to do to my 91 for many many years, but don't really know how to go about it. Thanks for the pictures! I have been contemplating selling my 91' , not anymore....

Jason

[1984 camaro]

Looks outstanding !!! Do you have any pictures of how the rear suspension was reworked to give you that kind of room? That is the one modification I have been wanting to do to my 91 for many many years, but don't really know how to go about it. Thanks for the pictures! I have been contemplating selling my 91' , not anymore....

Jason
Jason and Robbie here is pic from under side this is a older pic still in the rough
Randy

[Aschle]

NICE !! I don't mean to pry, but do you have any more under the rear shots? I am extremely interested in how everything is mounted under that thing...This is something I am seriously going to look into for my 91'. I have nothing in the traction department and this looks to be a cure with killer looks to boot. I give you 2 thumbs up man! Looks outstanding !! What details can you give me about what was used? Thanks for your time!

Jason

[Aschle]

You have me covered by a long shot.... pretty pathetic huh? 255/50/16 :rolleyes:

Jason

[1984 camaro]

NICE !! I don't mean to pry, but do you have any more under the rear shots? I am extremely interested in how everything is mounted under that thing...This is something I am seriously going to look into for my 91'. I have nothing in the traction department and this looks to be a cure with killer looks to boot. I give you 2 thumbs up man! Looks outstanding !! What details can you give me about what was used? Thanks for your time!

Jason
The Exhaust I have is two 3" pipes and they fit over the axle. The pic pretty much shows what was used. Coil overs, Umi pan hard bar, lower control arms and tourque arm. moser axle and build the rest.

[Van B]

Randy,

Good to meet you today. I remembered seeing this thread a while ago and did not put 2 and 2 together until I got home. I can't wait to see it when it is done. Any chance of it being at SEMA this year?

Jeff

[1984 camaro]

[QUOTE=Van B]Randy,

Good to meet you today. I remembered seeing this thread a while ago and did not put 2 and 2 together until I got home. I can't wait to see it when it is done. Any chance of it being at SEMA this year?
Jeff,
It was also nice to meet you. Not shure if the camaro will be done. We (tom nelson and I)backed out of sema this year since some components are only in the drawing stage and need to be built. It will be a few months yet. If it gets done by sema we will try for a long shot.

Thanks
Randy

[1 Dwn Cam]

What size rim does it take to fill out that 345-18 BFG Drag Radial? What offset? Did bent custom do the fuel system?

[1984 camaro]

The rims are 12 inches wide 2.5 outer and 9.5 inner and yes bent custom did all the stainless lines. I will be at nelsons on the 29th tom and I are going to sema on the 30-31st. That 92 you have looks good

[1984 camaro]

Here is a pic of my intake wich was built by www.nelsonracingengines.com

[1 Dwn Cam]

The rims are 12 inches wide 2.5 outer and 9.5 inner and yes bent custom did all the stainless lines. I will be at nelsons on the 29th tom and I are going to sema on the 30-31st. That 92 you have looks good
Thanks for the kind words, still a country mile away from where your car is. I work for one of the major manufacturers local to Nelson Racing which I'll leave nameless. I have to work SEMA will the car be there? Will it be in a booth or outside?

[1984 camaro]

Sorry the car will not be done for sema. The car is at toms shop so you are close to it. If you see tom at sema I will be with him.
Randy

[NvrDun71]

Here is a pic of my intake wich was built by www.nelsonracingengines.com

Is that the notorious $8000 intake?

[Kory 88Iroc Lt1]

Everything looks amazing.
Thanks for the update.
Kory

[1984 camaro]

Yes that is the nelson billet intake.

[1984 camaro]

Stopped in at Nelsons on monday to see the camaro. The tubs are done and Scott was going to paint the floor pan this week. Nelson had a twin turbo on the dyno and got to see that bad boy run at 2 am. The car looks great Mark at bent tubbing done the mini tub and hard lines. That guy is outstanding. Tom and I went to the sema show were i meet tons of people. We also went to the lateral g and pro-touring party. The trip was a blast and I will be their next year

[Blown90 Z]

this is one wicked camaro, i thought i had good power. you are exactly double amount of the power of my car. I hope to see future progress pics, maybe some of the exhaust.

[Aschle]

You happen to have any picture updates? I am itching to see more of this car!!

Jason

[1984 camaro]

You happen to have any picture updates? I am itching to see more of this car!!

Jason
Yea give me a few days the floor pans should be painted scott was masking of the car last friday The interior was done but it will go back the rear panels did not fit so we are going to mold a new set to look stock then send them out to be injection molded
Randy

[deuce_454]

then send them out to be injection molded
Randy

now that sounds like the spendy way to build a car!

[Aschle]

Yea give me a few days the floor pans should be painted scott was masking of the car last friday The interior was done but it will go back the rear panels did not fit so we are going to mold a new set to look stock then send them out to be injection molded
Randy

Thank you, I wish I could have seen the car when it was here in town @ Lemons. Any pictures will be appreciated! I had planned to get my 69' Camaro going first, but it is on the back burner now as I plan to continue on building up my 91'

Jason

[cpd004]

Very well executed....looks amazing.

[1984 camaro]

Very well executed....looks amazing.
I seen on another site that you posted for the third gen only show I am interested in going next year keep me up to date
Thanks

[deuce_454]

any picture updates??

[1984 camaro]

any picture updates??
Sorry Scott primed the car and found spots he didnt like. So the pans/tubs need more sanding and touch ups
Thanks
Randy

[1984 camaro]

Mark Bohlen has some pics of the camaro tubs on his web site at www.bentcustomandperformance.com look for the gallery and 1984 camaro

[bdr]

nice build.

[Aschle]

Any updates you could give on this build? I am itching to see more !:thumbsup:

Jason

[1984 camaro]

Any updates you could give on this build? I am itching to see more !:thumbsup:

Jason
I know the pans are being painted today they are spending tons of time on the floor pans the final coat of primer was shot tuesday. should be soon

[COYBILT]

I saw your tubs personally and damn mark did a good job on those. Your camaro is probally one of best uses of pro touring on a 80's GM product so far. Your camaros gets it, I Like the thing quite a bit.

[1984 camaro]

I saw your tubs personally and damn mark did a good job on those. Your camaro is probally one of best uses of pro touring on a 80's GM product so far. Your camaros gets it, I Like the thing quite a bit.



Thanks pontiac65 for the great post:thumbsup:

[Aschle]

Any new progress? If so, please share! :thumbsup: :lateral:

[1984 camaro]

This picture is not complete but this can give you a good idea on how its going to look. I should have some completed pics later in a few weeks.

Thanks
Randy

[syborg tt]

Mark Bohlen has some pics of the camaro tubs on his web site at www.bentcustomandperformance.com look for the gallery and 1984 camaro

I surfed Marks site ( www.bentcustomandperformance.com ) yesterday and all I can say is WOW !!!

I wonder if I could persuade him to do a road trip to Arkansas to plumb my truck. I would be honored :hail: to have his quality on my project.

[1984 camaro]

Ship your car the cost is not that bad I just shipped a car from florida to wisconsin enclosed trailer for 1,200 bucks door to door. I felt the cost was worth the getting a great job. Just my .02 cents:yes:

[syborg tt]

Ship your car the cost is not that bad I just shipped a car from florida to wisconsin enclosed trailer for 1,200 bucks door to door. I felt the cost was worth the getting a great job. Just my .02 cents:yes:


I actually don't have a problem shipping the truck to them it's just a time issue that we are backed into. Maybe the next project. Heck I may just ship them the motor.

[1984 camaro]

Give mark a call next time I will say working with him and nelson then meeting them at the sema show was like being with old friends. I had a great time

[syborg tt]

Give mark a call next time I will say working with him and nelson then meeting them at the sema show was like being with old friends. I had a great time

not to worry were already talking back and forth via e-mail

[1984 camaro]

Some guys been asking about the exhaust so here a some pics this is some older pics. The pipes will be polished.
Thaks for your interest. Note that the tubs are not in pictures but they fit the same

[1984 camaro]

Well Its time to get this post going again. The camaro is getting close to done
It is at bent custom having some finishing touches done. Mark will be posting some pics of the project the next few weeks.

The camaro is sema bound!!!:yes: :yes: Booth number 20615

[Aschle]

Well Its time to get this post going again. The camaro is getting close to done
It is at bent custom having some finishing touches done. Mark will be posting some pics of the project the next few weeks.

The camaro is sema bound!!!:yes: :yes: Booth number 50090

I have been wondering what the status was but did not want to keep bothering you for info... PLEASE, keep us updated!

Jason

[1984 camaro]

Couple pics of engine bay

[1984 camaro]

Pics of the killer nelson headers

[Kendall Burleson]

The upper shock mount are killer are those aftermarket units I love that set up.

[1984 camaro]

The upper shock mount are killer are those aftermarket units I love that set up.
Byun speed had them

[awr68]

That's one hell of a car...can't wait to see it!!

[1984 camaro]

picture of new panels the color differnce is by camera flash

[Rybar]

Probably one of the nicest 3rd gens on the planet :hail:

I smell a cover on Camaro Performers when it's done :thumbsup:

[1984 camaro]

Probably one of the nicest 3rd gens on the planet :hail:

I smell a cover on Camaro Performers when it's done :thumbsup:

Yea the camaro has a busy furture;) ;)

[platinumgta]

Waiting to see more of this...

[1984 camaro]

Picture of new front cover

[1984 camaro]

Here is a picture of engine bay of the nelson racing super car number 3. It has been a long road to this point but I say working with tom and his crew has been worth it. :thumbsup:

[syborg tt]

Picture of new front cover


please tell me about the fixture in the engine bay please ??

[1984 camaro]

please tell me about the fixture in the engine bay please ?? Just to hold turbos, the headers are not complete

[rjsjea]

One serious build...........:thumbsup:

[syborg tt]

Just to hold turbos, the headers are not complete

Is there any chance you can post some better pictures. I would love to see how they work.

[1984 camaro]

Is there any chance you can post some better pictures. I would love to see how they work. This might help

[syborg tt]

This might help


thank you - yep that helped.

So how is Brother Mike doing @ RPM I heard the bad news this morning about his shop getting broken into.

[Jr]

I heard this car was going to sema 08.???

[1984 camaro]

I heard this car was going to sema 08.???

Yes it is I am flying in a week early to help finish up the camaro. Trailer it to vegas. help tom set up the both. I wont sleep for a week :)

[TOM NELSON]

Well we are thrashing right now 10 days until this car needs to be shipped to Sema wish us luck Randy you are going to be one sleep deprived puppy when we get there heres some shots at 3.00 am last night

[awr68]

Lookin' good!!

It's crazy what you guys do to get the cars done for SEMA...but I'm glad you do it!! :thumbsup:

[1984 camaro]

As you can see in scotts post "top 300 pics" the camaro made it to sema. It was a lot of work but I would do it again Thank you Tom, Mark, Scott, Larry, Rudy, Keoni,( spelling?) Little Joe, Drew, Biggie, Dmp and more, The camaro is over the top I enjoyed working with all of you.
Randy

[syborg tt]

Randy - your car was over the top.

I must have taken 40 pics of the engine bay.

Kudo's to all that has worked on the car it's outstanding.

[jst8a5.0]

ya really nice car. Looked at it a while and snapped some shots. Ya think you could maybe stay away from the JC Whitney catalog next time you build something?:lol: just kidding, over the top awesome! Excellent work by all who had a hand in it!!

[1984 camaro]

I used the J C Whitney gold card. Thats a good one:thumbsup:

[Aschle]

Once you get some sleep and recover from the build, would you mind posting up more pictures? I love this car ! Any and all pictures would be appreciated...:thumbsup:

Jason

[Orbit]

Oh man! I love third gens.:cheers: In fact this thread is the hole reason I subscribed to this forum. LOL:yes:

I also have a third gen and its my altimate baby of all of my vehicles. (5 total)

1991 RS B4C with 52k miles. Near excellent condition.

I'd love to do some mods to it but I think its better to not mess with the rarity of it??...

[1984 camaro]

Oh man! I love third gens.:cheers: In fact this thread is the hole reason I subscribed to this forum. LOL:yes:

I also have a third gen and its my altimate baby of all of my vehicles. (5 total)

1991 RS B4C with 52k miles. Near excellent condition.

I'd love to do some mods to it but I think its better to not mess with the rarity of it??...
Thanks orbit You need to get car number 6 and cut that one up. shure Leave the 91 alone
Randy

[Orbit]

I have owned it for about 8 years and kept it all O.E and the miles down.

The stock injectors went south so I had to replace them. Did the Accel high impedance injectors. Also did a new chip for the computer for better performance.

Actually made a difference! I would love to do what you have done to you'rs.

[89 RS]

Randy, your Camaro is absolutely awesome! I can't wait to see more pics and hopefully a feature in Camaro Performers. You have helped set an example of what 3rd gens have the potential of being and helps eliminate the bad stigma that 3rd gens seem to carry. I look at your ride as inspiration for my Camaro. :thumbsup:

[1984 camaro]

Randy, your Camaro is absolutely awesome! I can't wait to see more pics and hopefully a feature in Camaro Performers. You have helped set an example of what 3rd gens have the potential of being and helps eliminate the bad stigma that 3rd gens seem to carry. I look at your ride as inspiration for my Camaro. :thumbsup:

Thanks corey at the sema show the camaro seem to have a huge response. Randy

[1984 camaro]

Nick did you find the post ? More pictures are in the sema show forum page 15 in open discussion look for my 300 pictures at sema
Randy

[slicknick81]

hello just recived my membership will check back later when my appontments are finished

[1984 camaro]

Just bumping up Make shure you guys take a good look at your hotrod magazine :thumbsup:
Randy

[Van B]

Will it be back home for summer? I'd like to see it.

[1984 camaro]

Will it be back home for summer? I'd like to see it.

I Think so but it will be late in the year

[1984 camaro]

Nelson just updated his site check it out

[Speedster]

Wow.

Congrats Randy!! Looks like your car/engine is in the new issue of Hot Rod.

That car is so sweet. Hope I get to meet you one of the times out there. Sounds like your car will be there when my car gets shipped out (Tom can tell ya what). Maybe I could pirate a ride or at least check out the man behind the car. There are so many cool touches and if I could get your opinion of which ones are "gotta have" that would be great.

[1984 camaro]

Wow.

Congrats Randy!! Looks like your car/engine is in the new issue of Hot Rod.

That car is so sweet. Hope I get to meet you one of the times out there. Sounds like your car will be there when my car gets shipped out (Tom can tell ya what). Maybe I could pirate a ride or at least check out the man behind the car. There are so many cool touches and if I could get your opinion of which ones are "gotta have" that would be great.
That sounds cool. Hope to see you.
Randy

[89 RS]

Originally posted by 1984 camaro
Nelson just updated his site check it out
Good stuff right there.:thumbsup:

[SteveMcqueenRules]

I am a fan of this car. It was cool to see it in Hot Rod.

[1984 camaro]

I am a fan of this car. It was cool to see it in Hot Rod.
Thanks,
Randy

[GMracer]

Wow :hail: I wish I could afford a Nelson Motor

[Kendall Burleson]

very nice car can't wait to see in person.:thumbsup: :thumbsup:

[Speedster]

Randy-
Saw your car at the shop Monday. It misses you....
Looks like a big piece of jewelry under the hood. NICE.

[1984 camaro]

Got my hot rod today. I was waiting for it for over a month not knowing what was said or what pics were used I am very pleased with the artiacle and the cover helps to. Thanks to dave Freiburger, Tom nelson, Scott and mark. Hope you enjoy this story as I did.
Thanks,
Randy

[89 RS]

Got my Hot Rod issue in mail today, very nice. I've been like a kid on Christmas waiting for this issue to get here. Thanks to Randy and Tom for building the ultimate third-gen and showing the potential of these Camaros. Builds like Randy's help eliminate the bad stigma people seem to give
third-gens. Great job guys!

[Aschle]

Congrats Randy !

Would any of you that know, PM me what the cost would be to "mini tub" my 91' Camaro like Randy's car? I could most likely do it myself, but it may be best to just have it done...

Jason

[1984 camaro]

Got my Hot Rod issue in mail today, very nice. I've been like a kid on Christmas waiting for this issue to get here. Thanks to Randy and Tom for building the ultimate third-gen and showing the potential of these Camaros. Builds like Randy's help eliminate the bad stigma people seem to give
third-gens. Great job guys!

:lol: christmas does come than once a year Thanks for your support and enjoy
Randy

[Speedster]

Congrats Randy. Your ride deserves the attention it is getting...

[SteveMcqueenRules]

I posted before but I just wanted to say this car changed my opinion of 3rd gen cars.

[1fas92]

Hello,
I have been following your car build for some time now. And it is the nicest thirdgen camaro out there (that i know of). I was wondering if you would consider getting some of the pics that you have & making some nice posters from them.

I would buy one or two to hang in my garage for sure! and if you made it one version one side and another picture on the other side, that would be great too!


Or email me some high resolution pictures and I will print a couple of them for me!

Let me know!
Thanks,
Robbie Sheffield
1fas92
please reply to the following:
[email protected]

[1984 camaro]

Hello,
I have been following your car build for some time now. And it is the nicest thirdgen camaro out there (that i know of). I was wondering if you would consider getting some of the pics that you have & making some nice posters from them.

I would buy one or two to hang in my garage for sure! and if you made it one version one side and another picture on the other side, that would be great too!


Or email me some high resolution pictures and I will print a couple of them for me!

Let me know!
Thanks,
Robbie Sheffield
1fas92
please reply to the following:
[email protected]

Robbie I will keep that in mind. there still is a lot to come on the 1984 camaro in the next months, Right now we a just putting the final touches on the car. Thanks for your interest.
Randy

[89 RS]

Robbie I will keep that in mind. there still is a lot to come on the 1984 camaro in the next months, Right now we a just putting the final touches on the car. Thanks for your interest.
Randy

Randy, Can you fill us in or will we have to wait?:)

[SickSpeedMonte]

This car is sick...
Thos are probably my favorite wheels too.

[1984 camaro]

Randy, Can you fill us in or will we have to wait?:)

I will some pics in a few weeks The camaro is getting a new interior as we speek
Randy

[89 RS]

I will some pics in a few weeks The camaro is getting a new interior as we speek
Randy

Cool...can't wait to see the pics. Randy, I just put new seats into my Camaro. If you don't mind check it out and let me know what you think.

[1984 camaro]

Cool...can't wait to see the pics. Randy, I just put new seats into my Camaro. If you don't mind check it out and let me know what you think.

Checked out your pics cory looking good :thumbsup:
Randy

[1984 camaro]

Quick picture of the leather seats Very pleased they were covered by a local shop
Randy

[syborg tt]

Quick picture of the leather seats Very pleased they were covered by a local shop
Randy

Hi Randy

Very nice - very nice

[T_Raven]

This is a good looking third gen. I'm partial to GTAs but this is one of the better looking third gen Camaros I've seen.

[89 RS]

Seat looks good Randy. Did you have the side bolsters built up a bit?

[1970judge]

Do you have any, pictures of interior shots? Specifically, rear area over the mini tubs?

[Jr]

ttt

I thought of this car when I saw the rad rides thread. Any progress?

[1fas92]

any updates, new info.....................

[1fas92]

....Hello,
I have been following your car build for some time now. And it is the nicest thirdgen camaro out there (that i know of). I was wondering if you would consider getting some of the pics that you have & making some nice posters from them.

I would buy one or two to hang in my garage for sure! and if you made it one version one side and another picture on the other side, that would be great too!


Or email me some high resolution pictures and I will print a couple of them for me!

Let me know!
Thanks,
Robbie Sheffield
1fas92
please reply to the following:
[email protected]


Any more, thoughts on this poster idea?

[1984 camaro]

Any more, thoughts on this poster idea?

Sorry been of the site for sometime the last year has been a handfull the camaro has been on hold. Randy

[1984 camaro]

Some pics from winter of 2009 Camaro has a morrison chassis c-6 front stub and a three link rear car is a roller floors are done, seats are mounted, brake master,wiper,AC are all mounted, Made a new cowl. rear tubs are almost done and the engine bay is stating Tha car sat since jan of 2010 But I will be back on the car this summer,
Randy

[1fas92]

WOW!
Well when you get around to it, I am still very interested in a poster or two of your car....
And I know the guys over on TGO would be too.........

[1fas92]

any updates....................

[bk2life]

any updates....................



...been years anything new?