MillerBuilt's WELD-ON C6/7 Hybrid Floater System

[MillerBuilt]

C6/C7 Hybrid Floater System -


These NEW billet steel Adaptors Weld-On to nearly any axle tube!


Advantages:



Welds to your new OR existing housing
Reduces/eliminates brake “knockback”
Eliminates axle deflection
Wheel & tire remains intact should an axle failure occur
Front or Rear Caliper / E-Brake Cable Positions
Utilizes the robust, zero maintenance C6/C7 ZO6 Hub Bearing Unit
Utilizes OEM C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
Utilizes aftermarket C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
Utilizes your existing BAER / WILWOOD caliper & rotor (some restrictions apply)
Super compact design compared to traditional style full floaters
All advantages of a traditional style full floater without the maintenance
Replacement parts available at local GM dealer or local parts house
No modifications required to the hub bearing unit as other kits in the marketplace


Fitment: Any rear-end with 2.750”-3.250” o.d. axle tubes

See information listed below for both the "long" and "short" versions...



Weld-On “Short" Base Kit (pictured below)
http://i35.photobucket.com/albums/d179/jaymillerone/IMG_1767_zpsxrevc6bp.jpg
Weld-On “Short" Base Kit (pictured above)



Base Kit (Short) Includes:

• (2) Billet Steel, Short Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,398.00


Base Kit (Long) Includes:

• (2) Billet Steel, Long Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,498.00



Add Axles - $400.00
• (2) Hy-Tuf Full Float Axles

Add E-Brake items - $325.00
• (2) C5/C6 Corvette Complete E-brake Assemblies
• (2) C5/C6 Corvette Parking/E-brake Cable Brackets


Have interest?
Have questions?
Need more info?

Distributor Inquires Welcome!



To help determine which kit might work best for your particular application, please see below picture.
http://i35.photobucket.com/albums/d179/jaymillerone/Long20Short20Comp_zpsi1qfyc6n.jpg


Questions welcomed!

[MillerBuilt]

FREE Shipping & PayPal This Weekend!! (8/6/16 & 8/7/16 - "lower 48" states only)

[MillerBuilt]

FREE Shipping & PayPal through October!! ("lower 48" only)



C6/C7 Hybrid Floater System -


These NEW billet steel Adaptors Weld-On to nearly any axle tube!


Advantages:



Welds to your new OR existing housing
Reduces/eliminates brake “knockback”
Eliminates axle deflection
Wheel & tire remains intact should an axle failure occur
Front or Rear Caliper / E-Brake Cable Positions
Utilizes the robust, zero maintenance C6/C7 ZO6 Hub Bearing Unit
Utilizes OEM C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
Utilizes aftermarket C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
Utilizes your existing BAER / WILWOOD caliper & rotor (some restrictions apply)
Super compact design compared to traditional style full floaters
All advantages of a traditional style full floater without the maintenance
Replacement parts available at local GM dealer or local parts house
No modifications required to the hub bearing unit as other kits in the marketplace


Fitment: Any rear-end with 2.750”-3.250” o.d. axle tubes

See information listed below for both the "long" and "short" versions...



Weld-On “Short" Base Kit (pictured below)
http://i35.photobucket.com/albums/d179/jaymillerone/IMG_1767_zpsxrevc6bp.jpg
Weld-On “Short" Base Kit (pictured above)



Base Kit (Short) Includes:

• (2) Billet Steel, Short Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,398.00


Base Kit (Long) Includes:

• (2) Billet Steel, Long Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,498.00



Add Axles - $400.00
• (2) Hy-Tuf Full Float Axles

Add E-Brake items - $325.00
• (2) C5/C6 Corvette Complete E-brake Assemblies
• (2) C5/C6 Corvette Parking/E-brake Cable Brackets


Have interest?
Have questions?
Need more info?

Distributor Inquires Welcome!



To help determine which kit might work best for your particular application, please see below picture.
http://i35.photobucket.com/albums/d179/jaymillerone/Long20Short20Comp_zpsi1qfyc6n.jpg


Questions welcomed!

[MillerBuilt]

FREE Shipping & PayPal through October!! ("lower 48" only)

This........ (floater ends)
http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2156_zpsainamkh2.jpg

Gets you to this..... (complete hybrid full floater system)
http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2160_zpsh2bmigjf.jpg

http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2164_zpse5lmj6be.jpg

http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2167_zps1onf1adn.jpg

Housings can be supplied as well for a complete solution......

Thanks for looking!

[MillerBuilt]

C6/C7 Hybrid Floater System -


These NEW billet steel Adaptors Weld-On to nearly any axle tube!


Advantages:



Welds to your new OR existing housing
Reduces/eliminates brake “knockback”
Eliminates axle deflection
Wheel & tire remains intact should an axle failure occur
Front or Rear Caliper / E-Brake Cable Positions
Utilizes the robust, zero maintenance C6/C7 ZO6 Hub Bearing Unit
Utilizes OEM C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
Utilizes aftermarket C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
Utilizes your existing BAER / WILWOOD caliper & rotor (some restrictions apply)
Super compact design compared to traditional style full floaters
All advantages of a traditional style full floater without the maintenance
Replacement parts available at local GM dealer or local parts house
No modifications required to the hub bearing unit as other kits in the marketplace


Fitment: Any rear-end with 2.750”-3.250” o.d. axle tubes

See information listed below for both the "long" and "short" versions...



Weld-On “Short" Base Kit (pictured below)
http://i35.photobucket.com/albums/d179/jaymillerone/IMG_1767_zpsxrevc6bp.jpg
Weld-On “Short" Base Kit (pictured above)



Base Kit (Short) Includes:

• (2) Billet Steel, Short Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,398.00


Base Kit (Long) Includes:

• (2) Billet Steel, Long Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,498.00



Add Axles - $400.00
• (2) Hy-Tuf Full Float Axles

Add E-Brake items - $325.00
• (2) C5/C6 Corvette Complete E-brake Assemblies
• (2) C5/C6 Corvette Parking/E-brake Cable Brackets


Have interest?
Have questions?
Need more info?

Distributor Inquires Welcome!



To help determine which kit might work best for your particular application, please see below picture.
http://i35.photobucket.com/albums/d179/jaymillerone/Long20Short20Comp_zpsi1qfyc6n.jpg


Questions welcomed!

This........ (floater ends)
http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2156_zpsainamkh2.jpg

Gets you to this..... (complete hybrid full floater system)
http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2160_zpsh2bmigjf.jpg

http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2164_zpse5lmj6be.jpg

http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2167_zps1onf1adn.jpg

Housings can be supplied as well for a complete solution......

Thanks for looking!


In Stock!

[MillerBuilt]

C6/C7 Hybrid Floater System -


These NEW billet steel Adaptors Weld-On to nearly any axle tube!


Advantages:



Welds to your new OR existing housing
Reduces/eliminates brake “knockback”
Eliminates axle deflection
Wheel & tire remains intact should an axle failure occur
Front or Rear Caliper / E-Brake Cable Positions
Utilizes the robust, zero maintenance C6/C7 ZO6 Hub Bearing Unit
Utilizes OEM C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
Utilizes aftermarket C5/C6/C7 Corvette, and 5th Gen Camaro brake kits
Utilizes your existing BAER / WILWOOD caliper & rotor (some restrictions apply)
Super compact design compared to traditional style full floaters
All advantages of a traditional style full floater without the maintenance
Replacement parts available at local GM dealer or local parts house
No modifications required to the hub bearing unit as other kits in the marketplace


Fitment: Any rear-end with 2.750”-3.250” o.d. axle tubes

See information listed below for both the "long" and "short" versions...



Weld-On “Short" Base Kit (pictured below)
http://i35.photobucket.com/albums/d179/jaymillerone/IMG_1767_zpsxrevc6bp.jpg
Weld-On “Short" Base Kit (pictured above)



Base Kit (Short) Includes:

• (2) Billet Steel, Short Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,398.00


Base Kit (Long) Includes:

• (2) Billet Steel, Long Hybrid Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) C7 Corvette, SKF 33 Spline Hub Assemblies
• (1) Install Kit
• (2) Hub Spacers
• (2) Billet Aluminum Hub Cap Seals
________________________________________
STARTING AT - $1,498.00



Add Axles - $400.00
• (2) Hy-Tuf Full Float Axles

Add E-Brake items - $325.00
• (2) C5/C6 Corvette Complete E-brake Assemblies
• (2) C5/C6 Corvette Parking/E-brake Cable Brackets


Have interest?
Have questions?
Need more info?

Distributor Inquires Welcome!



To help determine which kit might work best for your particular application, please see below picture.
http://i35.photobucket.com/albums/d179/jaymillerone/Long20Short20Comp_zpsi1qfyc6n.jpg


Questions welcomed!

This........ (floater ends)
http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2156_zpsainamkh2.jpg

Gets you to this..... (complete hybrid full floater system)
http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2160_zpsh2bmigjf.jpg

http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2164_zpse5lmj6be.jpg

http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2167_zps1onf1adn.jpg

Housings can be supplied as well for a complete solution......

Thanks for looking!


In Stock!

[MillerBuilt]

In Stock