Is there a source for condensor brackets?

[cpd004]

I thought I read somewhere that Detroit Speed sells brackets to mount a Vintage Air condenser to the core support. They are most likely for a 1st gen. I haven't seen them on their site, nor have I called. Is there a source for these for a 2nd gen F-body? Or what have you guys come up with?

[Vince@Meanstreets]

I thought I read somewhere that Detroit Speed sells brackets to mount a Vintage Air condenser to the core support. They are most likely for a 1st gen. I haven't seen them on their site, nor have I called. Is there a source for these for a 2nd gen F-body? Or what have you guys come up with?

Have you tried Vintage air?

[cpd004]

I didn't but will look into that.

[Vince@Meanstreets]

Let me know if you hit a wall. I can look around too.

[cpd004]

Thanks! Nice if you to offer. I sent them an email yesterday.

[dontlifttoshift]

I have no idea which condenser you have and I am assuming you are talking about the '71 firebird in your signature. Here are the instructions for a surefit condenser kit. You will see the part number for the bracket on page 3. Those brackets will only work with the super badass 1" thick condenser though, part number 037030-OVR

http://www.vintageair.com/Instructions2013/903435.pdf

[cpd004]

Thanks for the link!

I'll check them out.