Gerald Carrier's '68 Camaro on Forgeline GA3 Wheels

[Forgeline Wheels]

Gerald’s gorgeous pro-touring ’68 Camaro is another example of excellent work from GAP Racing. It’s powered by an old school small block mated to a Richmond 5-speed transmission and rides on Speedtech suspension, Viking Performance coilovers, Moser 12-bolt rear end, Detroit Speed mini tubs, Baer brakes, 235/40R18 & 315/30R18 Falken Azenis tires, and 18x8/18x11 Forgeline GA3 wheels finished with Gloss Graphite centers, Gloss Black inners, & Polished/Cleared outers! See more at: http://www.forgeline.com/customer_gallery_view.php?cvk=1852

http://i.imgur.com/PA7wV5Z.jpg
http://i.imgur.com/jsMWIJm.jpg
http://i.imgur.com/2hkv58f.jpg
http://i.imgur.com/sYi3KI8.jpg

[fleetus macmullitz]

Very nice...

[HotRod68Camaro]

just saw it on Instagram. That color combo is awesome.

[drunkmaster]

Nice rims!

[Dr. Jekyll]

Is having the outers polished and clear coated still an option for your wheels?

[Forgeline Wheels]

Is having the outers polished and clear coated still an option for your wheels?

Yes, on a three piece wheel, a polished outer is standard. Any powder coat on the outer is an additional $75 charge, whether this is a clear coat or a color.

So if you don't specify that you want a powder coat on the outer, then we will give you a polished outer. If you want a clear coat on that, then be sure to tell us, and we will charge an extra $75 per wheel.

FYI, the clear powder coat definitely makes it easier to clean/maintain, BUT is also will dull the brightness of the polished outer. So there is a tradeoff, in addition to the extra cost. If you want the polished outer to "pop" as much as possible, then the clear might not be the best option...