nicks67ca
01-16-2017, 06:40 AM
Item Location (City/State): 06488 Southbury CT
Price: $500 OBO + Shipping (Paypal)
Description:
All parts are used but in perfect working order. There is some surface rust and some anaodizing missing on the upper arms but work none the less. Could use a good degrease and paint. These were on my 1967 camaro. I am selling as a complete package. This would be a direct fitment on any Gen 1 Fbody the springs utilize sock lower control arms.
This was a very good handling package. Ideal for a lower budget build. I'm upgrading to a new subframe and will not longer use these.
Varishock Single Adjustable shocks
Hotchkis SBC coil springs
SPC Upper Control Arms with Howe Screw in Tall ball joint
Baer Tracker bumpsteer kit - the threaded adjuster was cut down to allow for proper adjustment. It originally bottomed out on the adjuster so it was cut and properly threaded.
http://i44.photobucket.com/albums/f9/nicks67camaro/front%20sus_zpssymueure.jpg (http://s44.photobucket.com/user/nicks67camaro/media/front%20sus_zpssymueure.jpg.html)
http://i44.photobucket.com/albums/f9/nicks67camaro/shocks_zpsfefh6bxf.jpg (http://s44.photobucket.com/user/nicks67camaro/media/shocks_zpsfefh6bxf.jpg.html)
http://i44.photobucket.com/albums/f9/nicks67camaro/springs_zpswud46yek.jpg (http://s44.photobucket.com/user/nicks67camaro/media/springs_zpswud46yek.jpg.html)
Price: $500 OBO + Shipping (Paypal)
Description:
All parts are used but in perfect working order. There is some surface rust and some anaodizing missing on the upper arms but work none the less. Could use a good degrease and paint. These were on my 1967 camaro. I am selling as a complete package. This would be a direct fitment on any Gen 1 Fbody the springs utilize sock lower control arms.
This was a very good handling package. Ideal for a lower budget build. I'm upgrading to a new subframe and will not longer use these.
Varishock Single Adjustable shocks
Hotchkis SBC coil springs
SPC Upper Control Arms with Howe Screw in Tall ball joint
Baer Tracker bumpsteer kit - the threaded adjuster was cut down to allow for proper adjustment. It originally bottomed out on the adjuster so it was cut and properly threaded.
http://i44.photobucket.com/albums/f9/nicks67camaro/front%20sus_zpssymueure.jpg (http://s44.photobucket.com/user/nicks67camaro/media/front%20sus_zpssymueure.jpg.html)
http://i44.photobucket.com/albums/f9/nicks67camaro/shocks_zpsfefh6bxf.jpg (http://s44.photobucket.com/user/nicks67camaro/media/shocks_zpsfefh6bxf.jpg.html)
http://i44.photobucket.com/albums/f9/nicks67camaro/springs_zpswud46yek.jpg (http://s44.photobucket.com/user/nicks67camaro/media/springs_zpswud46yek.jpg.html)