LS3 Intake manifold setup takeoff w/ injectors, rails, etc

[jwcarguy]

Item Location (City/State):Las Vegas, NV 89131

Price: $425 SOLD!!

Description:

I have a low mileage take off (8k) LS3 intake manifold setup
comes complete with:
-intake manifold
-manifold & TB seals
- GM MAP sensor and hold down screw
-GM fuel rail assembly w/ hold down bolts
-GM LS3 / LS7 42# fuel injectors w/ retaining clips
-upper intake manifold beauty cover ( some refinish them for custom look , see carbon fiber pic as example)

fits all LS / Vortec engines with rectangle ports cylinder heads (ie L76, L92, LY6, L99 , etc)

Complete intake manifold assembly as listed above $425 + shipping SOLD!!

I do also have a new LS3 (gold blade) take off DBW throttle body available for a extra cost

pm/call/ text (702)677-4085

[tpichevy]

Will this bolt onto a 2009 6.0 Yukon ls2? I'm new to the LS motor so I have lots to learn.

[jwcarguy]

Will this bolt onto a 2009 6.0 Yukon ls2? I'm new to the LS motor so I have lots to learn.

It may, depending on which cylinder heads that you have on the engine
This is for rectangle port heads
Look for 3 digit cast # on corner of heads , near valve cover (ie 317, 799, 821, 823, etc. )
They never put a "LS2" in a Yukon, you may have a 6.0L, but not a true LS2

Thanks
Jeff

[tpichevy]

It's a 6.0 aluminum block with 243 heads .....been told it's the same as a ls2...is that wrong?looking to do a ls swap in my 1970 camaro

[jwcarguy]

It's a 6.0 aluminum block with 243 heads .....been told it's the same as a ls2...is that wrong?looking to do a ls swap in my 1970 camaro


Not necessarily
similar to the L92/ L99 vs LS3 same displacement, but many differences between them

the "243" heads are cathedral port, so the LS3 intake will not work for your engine

[jwcarguy]

Intake manifold setup & TB are SOLD!!