markaaron80
10-26-2016, 05:26 PM
Item Location (City/State):Macon, Ga
Price:$59,000
Description:All new sheet metal replaced by Muscle Car Metal in NH, ZERO RUST. Mini tubbed, has the stronger convertible lower rockers installed, subframe connectors, transmission crossmember, Wilwood brakes front and rear and their parking brake, Heidts pro G Front subframe installed with coilovers and polished stainless control arms. Heidts Pro G IRS (independent rear suspension installed, with axles rated to 800hp) with inboard wilwood 4 piston brakes and 9 inch aluminum center with 3:70 gears, New LS3 480hp crate engine with dyno papers (made 495hp) installed (never run) with new in box Nick Williams 102mm throttle body, Brian Tooley stage 4 N/A cam kit new in box with all springs, locks, retainers etc.. upgraded trunnion kit, (ls forums has a few cars with exact engine, cam, throttle body, sheet metal intake and headers making over 600hp, average 520-540RWHP)*new Mcloed clutch installed, with new TREMEC t56 6 speed transmission installed (new never run) new stainless works longtube headers (CALS1) installed, rack and pinion steering, new front windshield installed, original back glass, power window kit in the box, DSE metal dash insert still in the box, new in box AAW wiring kit, have original front and rear seats with a COMPLETE interior kit (black with houndstooth inserts), new Speedhut guages (oil pressure,fuel level, water temp,voltage,tachometer and speedo with gps. every seal, carpet, seat covers are black with white houndstooth ,1 piece head liner (fiberglass) for 1-2 inches more headroom, dash pad etc.. ordered as a complete interior kit. new AC Delco starter installed, have a black sheetmetal intake with fuel rails from Symbol Performance (USA made in CA) new in box. Complete fuel system, Aeromotive fuel pump, stainless braided lines and filter, RICKS Vapormax stainless fuel tank installed, Entropy aluminum radiator with dual fans and a programmable module for fans, have both front and rear bumpers. have items to paint trunk area with spatter paint. have the original fenders (white and in good shape) and new NOS fenders installed. Original doors, and firewall. Has 1 piece floor pan from firewall to trunk with minitub cutouts. Has new Wilwood manual master cylinder installed with proportion valve, has new black flaming river steering column with tilt, raingear hidden wiper system, vintage air a/c kit with DSE mounting bracket, control knob, vents and lines with firewall bulkhead, Momo black leather steering wheel, 2 new in box Corbeau black leather reclining seats (drivers seat has inflatable lumbar support) with Corbeau seat brackets and double sliders, factory rear seat already trimmed, fabricated and welded to sit between minitubs, rear wheel tubs will fit a 21x14 rim, I had planned on a 275 tire up front and* 345 in the rear on 19x10 and 19x12.5 wheels. Has billet hood hinges and power window kit new in box.
Over $70k in car. Just had my first child in July and time is scarce, plus I've had 2 back surgeries, so not a lot of days I feel like working on it. *Would rather find something completed.
I'm not hurting for money, I understand everyone wants a steal (me included), but if your offer doesn't start with* $5x,xxx**I will not consider it. PLEASE DON'T WASTE EITHER OF OUR TIME. If it doesn't sell then I will continue to slowly finish the car.
needs minimal body work and paint along with interior installed, needs side glass and rear glass is original (not perfect), front subframe and rear IRS needs to be painted or powder coated, needs front spoiler, rear wing, head lights and tail lights.
124 vin # so original V8 car. that's all I know. Original body by fisher firewall tag was gone.
$59,000
*Title in hand MAY TRADE + OR - $$$ FOR A COMPLETED 67-69 Camaro,66-67 Chevy II 2 door, 55-57 Chevy 2 door (posts only), 70 Cuda, 70 Challenger, 65-66 Mustang fast backs, 66 Mustang coupe or 1940's Dodge Power Wagon 4x4 Truck (preferably with a diesel)
Located 1 hour south of Atlanta, Ga
Thanks, Mark
http://s903.photobucket.com/user/markaaron80/library/Mobile%20Uploads?sort=3&page=1
Pics are a few months old. Don't have pics of newer stuff like guages, steering wheel, throttle body etc...
Price:$59,000
Description:All new sheet metal replaced by Muscle Car Metal in NH, ZERO RUST. Mini tubbed, has the stronger convertible lower rockers installed, subframe connectors, transmission crossmember, Wilwood brakes front and rear and their parking brake, Heidts pro G Front subframe installed with coilovers and polished stainless control arms. Heidts Pro G IRS (independent rear suspension installed, with axles rated to 800hp) with inboard wilwood 4 piston brakes and 9 inch aluminum center with 3:70 gears, New LS3 480hp crate engine with dyno papers (made 495hp) installed (never run) with new in box Nick Williams 102mm throttle body, Brian Tooley stage 4 N/A cam kit new in box with all springs, locks, retainers etc.. upgraded trunnion kit, (ls forums has a few cars with exact engine, cam, throttle body, sheet metal intake and headers making over 600hp, average 520-540RWHP)*new Mcloed clutch installed, with new TREMEC t56 6 speed transmission installed (new never run) new stainless works longtube headers (CALS1) installed, rack and pinion steering, new front windshield installed, original back glass, power window kit in the box, DSE metal dash insert still in the box, new in box AAW wiring kit, have original front and rear seats with a COMPLETE interior kit (black with houndstooth inserts), new Speedhut guages (oil pressure,fuel level, water temp,voltage,tachometer and speedo with gps. every seal, carpet, seat covers are black with white houndstooth ,1 piece head liner (fiberglass) for 1-2 inches more headroom, dash pad etc.. ordered as a complete interior kit. new AC Delco starter installed, have a black sheetmetal intake with fuel rails from Symbol Performance (USA made in CA) new in box. Complete fuel system, Aeromotive fuel pump, stainless braided lines and filter, RICKS Vapormax stainless fuel tank installed, Entropy aluminum radiator with dual fans and a programmable module for fans, have both front and rear bumpers. have items to paint trunk area with spatter paint. have the original fenders (white and in good shape) and new NOS fenders installed. Original doors, and firewall. Has 1 piece floor pan from firewall to trunk with minitub cutouts. Has new Wilwood manual master cylinder installed with proportion valve, has new black flaming river steering column with tilt, raingear hidden wiper system, vintage air a/c kit with DSE mounting bracket, control knob, vents and lines with firewall bulkhead, Momo black leather steering wheel, 2 new in box Corbeau black leather reclining seats (drivers seat has inflatable lumbar support) with Corbeau seat brackets and double sliders, factory rear seat already trimmed, fabricated and welded to sit between minitubs, rear wheel tubs will fit a 21x14 rim, I had planned on a 275 tire up front and* 345 in the rear on 19x10 and 19x12.5 wheels. Has billet hood hinges and power window kit new in box.
Over $70k in car. Just had my first child in July and time is scarce, plus I've had 2 back surgeries, so not a lot of days I feel like working on it. *Would rather find something completed.
I'm not hurting for money, I understand everyone wants a steal (me included), but if your offer doesn't start with* $5x,xxx**I will not consider it. PLEASE DON'T WASTE EITHER OF OUR TIME. If it doesn't sell then I will continue to slowly finish the car.
needs minimal body work and paint along with interior installed, needs side glass and rear glass is original (not perfect), front subframe and rear IRS needs to be painted or powder coated, needs front spoiler, rear wing, head lights and tail lights.
124 vin # so original V8 car. that's all I know. Original body by fisher firewall tag was gone.
$59,000
*Title in hand MAY TRADE + OR - $$$ FOR A COMPLETED 67-69 Camaro,66-67 Chevy II 2 door, 55-57 Chevy 2 door (posts only), 70 Cuda, 70 Challenger, 65-66 Mustang fast backs, 66 Mustang coupe or 1940's Dodge Power Wagon 4x4 Truck (preferably with a diesel)
Located 1 hour south of Atlanta, Ga
Thanks, Mark
http://s903.photobucket.com/user/markaaron80/library/Mobile%20Uploads?sort=3&page=1
Pics are a few months old. Don't have pics of newer stuff like guages, steering wheel, throttle body etc...