9" housing recomendation with Ridetech 4 link

[paulk68]

Hey guys, this will be going in a 68 camaro, is there a particular 9" housing that works best with the ridetech bolt in 4 link? IO remember reading someone had a problem with the filler cap hitting.
Thanks

[130fe]

I am using the Currie one (their first gen stock width one). No issues with it. I would recommend getting a drain and fill plug welded in (by the manufacturer or someone you hire). I would not order one from anyone with the upper tabs already welded in using a "jig". Had a local buddy just go through a two month ordeal buying one, shipped it back and forth twice because the upper tab location was incorrect (both times). After that ordeal, he returned it and started all over.

[Musclerodz]

I just ordered and installed a moser 9" i ordered complete without any brackets installed. no filler neck. everything cleared no issues

[waynieZ]

I have a Chris Alston built br Mike it's a nice unit, but Moser and Currie can set you up with a complete set up and are great parts.