PDA

View Full Version : Recommendations for LS3 with Whipple cold air intake ('68 Camaro)

snichols28
06-05-2016, 11:14 AM
I saw this cold air intake from Spectre on Bad Penny and need something like it. I contacted Spectre and they said this will only fit LS2's, not LS3 like I need. Anyone else have ideas on what to use that looks like this and routes to the left side of the engine?

Spectre intake on Bad Penny
http://i49.photobucket.com/albums/f297/snichols28/2hh396s%201.jpg

My setup:
http://i49.photobucket.com/albums/f297/snichols28/Camaro%20-%20folder%202/20160527_191255.jpg
http://i49.photobucket.com/albums/f297/snichols28/Camaro%20-%20folder%202/20160531_163547.jpg
randy
06-05-2016, 07:00 PM
airraid u build it.

I used one and then glued the pipes together instead of the couplers. 4" kit
http://i30.photobucket.com/albums/c302/icemanrld19/12523147_10100747439522486_3731485608560434969_n.j pg (http://s30.photobucket.com/user/icemanrld19/media/12523147_10100747439522486_3731485608560434969_n.j pg.html)
snichols28
06-05-2016, 07:38 PM
Nice setup you have!! Thanks for the info


airraid u build it.

I used one and then glued the pipes together instead of the couplers. 4" kit
http://i30.photobucket.com/albums/c302/icemanrld19/12523147_10100747439522486_3731485608560434969_n.j pg (http://s30.photobucket.com/user/icemanrld19/media/12523147_10100747439522486_3731485608560434969_n.j pg.html)
jlwdvm
06-07-2016, 01:23 PM
4" steel tubing from Summit with a K&N filter behind the light to draw cool outside air.
http://www.pro-touring.com/threads/102040-1969-Firebird-TA-clone-track-car-build/page9
snichols28
06-07-2016, 01:25 PM
4" steel tubing from Summit with a K&N filter behind the light to draw cool outside air.
http://www.pro-touring.com/threads/102040-1969-Firebird-TA-clone-track-car-build/page9

Thanks! I ordered what I needed.
67RSRAG
06-10-2016, 07:17 PM
airraid u build it.

I used one and then glued the pipes together instead of the couplers. 4" kit
http://i30.photobucket.com/albums/c302/icemanrld19/12523147_10100747439522486_3731485608560434969_n.j pg (http://s30.photobucket.com/user/icemanrld19/media/12523147_10100747439522486_3731485608560434969_n.j pg.html)

What glue did you use to glue it?
randy
06-10-2016, 08:00 PM
gorilla 2 part epoxy quick set, tacked it with super glue first