MillerBuilt's WELD-ON C6/7 Hybrid Floater System

[MillerBuilt]

Full Floater System -


These NEW billet steel Adaptors Weld-On to nearly any axle tube!


Advantages:



Welds to your new OR existing housing
Reduces/eliminates brake “knockback”
Eliminates axle deflection
Wheel & tire remains intact should an axle failure occur
Front or Rear Caliper / E-Brake Cable Positions
Utilizes the robust, zero maintenance C6/C7 ZO6 Hub Bearing Unit
Utilizes OEM C5/C6/C7 Corvette, and 5th/6th Gen Camaro brake kits
Utilizes aftermarket C5/C6/C7 Corvette, and 5th/6th Gen Camaro brake kits
Utilizes your existing BAER / WILWOOD caliper & rotor (some restrictions apply)
Super compact design compared to traditional style full floaters
All advantages of a traditional style full floater without the maintenance
Replacement parts available at local GM dealer or local parts house
No modifications required to the hub bearing unit as other kits in the marketplace


Fitment: Any rear-end with 2.750”-3.250” o.d. axle tubes

See information listed below for both the "long" and "short" versions...



Weld-On “Short" Floater Kit (pictured below)

E-brake Assemblies & E-brake Cable Brackets NOW INCLUDED With Each Floater Kit
http://i35.photobucket.com/albums/d179/jaymillerone/IMG_4363_zpsnktb03em.jpg


Full Floater Kit (Short) Includes:

• (2) Billet Steel Short Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) SKF 33 Spline Hub Assemblies
• (2) E-brake Assemblies
• (2) E-brake Cable Brackets
• (1) Install Kit
• (2) Billet Aluminum Hub Cap Seals
________________________________________
PRICING AT - https://millerbuiltusa.com/universal-weld-on-base-kit/


Full Floater Kit (Long) Includes:

• (2) Billet Steel Long Floater Adaptors
• (2) Billet Aluminum Caliper Brackets
• (2) SKF 33 Spline Hub Assemblies
• (2) E-brake Assemblies
• (2) E-brake Cable Brackets
• (1) Install Kit
• (2) Billet Aluminum Hub Cap Seals
________________________________________
PRICING AT - https://millerbuiltusa.com/universal-weld-on-base-kit/


Have interest?
Have questions?
Need more info?

Distributor Inquires Welcome!



To help determine which kit might work best for your particular application, please see below picture.
http://i35.photobucket.com/albums/d179/jaymillerone/Long20Short20Comp_zpsi1qfyc6n.jpg

"Weld-On" kit in action!
qqhoB9AZkzk&utm_source=Track1+and+48Hr+Camaro+Partners&utm_campaign=e2cb83b059-Sponsor_Report_11-10-17_COPY_01&utm_medium=email&utm_term=0_411c5faa37-e2cb83b059-92880301
Me-O6kLjoKw&feature=youtu.be&utm_source=Track1+and+48Hr+Camaro+Partners&utm_campaign=f630f6465b-Sponsor_Report_11-10-17&utm_medium=email&utm_term=0_411c5faa37-f630f6465b-92880301
FtvoTEZJwmk

Questions welcomed!

[MillerBuilt]

FREE Shipping & PayPal This Weekend!! (8/6/16 & 8/7/16 - "lower 48" states only)

[MillerBuilt]

FREE Shipping & PayPal through October!! ("lower 48" only)

This........ (floater ends)
http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2156_zpsainamkh2.jpg

Gets you to this..... (complete hybrid full floater system)
http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2160_zpsh2bmigjf.jpg

http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2164_zpse5lmj6be.jpg

http://i35.photobucket.com/albums/d179/jaymillerone/IMG_2167_zps1onf1adn.jpg

Housings can be supplied as well for a complete solution......

Thanks for looking!

[MillerBuilt]

In Stock

[MillerBuilt]

Recently received a few orders from Donny over at Frame Up Wheel Works. Donny/Frame Up is out of Beach Park, IL. Donny's builds speak for themselves and I am thrilled to have him on board with the MillerBuilt Full Floaters!

Donny is well versed in what it takes to properly fixture the MillerBuilt Weld-On Full Floater. Donny felt the MillerBuilt Hybrid Full Floater System was the best solution for what he was looking to accomplish. Per Donny,,,,, mission accomplished!

Below is the beautiful 69' that one of the MillerBuilt kits sits under. The car frequents both Auto-X and Open Track Days....

http://i35.photobucket.com/albums/d179/jaymillerone/Rich%20CR2017.1_zps1udkxyn1.jpg

[dontlifttoshift]

Thanks Jay!!

Here is another that we did.

https://lh3.googleusercontent.com/Lj7bAjqYKqu8IY8-BzUx9lZTEu3c_ap4Bh6mvTI-RD-9JD1PSm_di4oAwfgnqbfQ61nGENvQyJCxBoAfDXAL9OBG40OxW wLdguvXYkZXnmlsg8-ErdS7rqOCEP2rSQmR-td3e2RShwfKjsx5huPA0GimG-R92kYcTYfVTINectCmCUrGSpjg8UsEBPOKN8klh0z_ucyUxvZv 8-_yRaBoTzlCmLUcQwUtfrH95z3HQS_Eloo4w9IOnaTBslXI-GPF1ouci7VL8srSTZK0LZB4Y0yU5n4o1XtE3hLXjy9OBkNm8ve 8Ab4VgPCjE40xtzq1r4WM410kFm7d4BIV-tp53kgL68KDfqmGeVrhjQ4igIdkV2T_fUUOsW6oTK_7X8NmcNn B0y8z2T1QNV1Gti6TA7TTvkRDt4rg-zR36YYoePWs9_uWZelrDeRjjAJYOz0KSGV5_B7tSp-zzHTRVeZ_6G4pyvvqe7FQHO8hZY1TFBgRyNPSzxZFkak606FqG f_MjMCnxCQmBfDd9UtKxa5zVE_UaRJ8HfyjCxgu8cjBB6cDQn_ CzZ2JAHmyOm2sOabYZ6mirRjRbVOmn0n5NsnepLLillOZMnwgE 1vjsQ84Uer9qRNsjlAcZPyr7l0Xg-9lxxLQDBvLWG3ZsZewdtDvy6C6lFSTgvxGnao6zo2J2Fq4oyY= w1425-h950-no


Using the long snout weld on kit, I was able to widen the rear end so that I could run a square wheel and tire setup helping our consumables last longer.

[MillerBuilt]

MillerBuilt is very proud to be a part of the new Ridetech Track 1 Camaro build!

Follow along as this beast comes to life...


http://www.ridetech.com/info/category/garage-stories/track-1-camaro-project-build/

[MillerBuilt]

In Stock!

[badazz81z28]

Theres a thirst for more info on these kits. They now come as bolt on which is very nice. Do you offer axles? Is there an inner axle seal with the kit? Will the ear spacing on the caliper bracket fit aftermarket brakes like Baer 6P and SS4?

[214Chevy]

I bought Jay’s weld on kit. Very quality kit and his customer service is great. Every time I called with a question, he either answered the phone or called me back with great tech support too. I highly recommend his parts. Yes, he supplied me with axles as well. His kit comes with everything you need and I told him what brakes I'd be running also. I'm running Baer 6S Extreme kit on the rear.

[badazz81z28]

May I ask the center to center measurement for the ears on the caliper bracket? I want to see of your calipers are the same as mine.

[MillerBuilt]

Theres a thirst for more info on these kits. They now come as bolt on which is very nice. Do you offer axles? Is there an inner axle seal with the kit? Will the ear spacing on the caliper bracket fit aftermarket brakes like Baer 6P and SS4?

Thank you for your interest. You are correct, in addition to the Weld-On kits as you see here, I offer Bolt-On kits for the follow type housing ends regardless of what housing they are attached too.

* Big Bearing Ford/Torino
* Moser 7900/Strange H1143
* GM Car 10/12 Bolt (except Impala)
* 98-02 F-body (coming soon)

https://millerbuiltusa.com/bolt-on-kit-application-chart/

Yes, axles are offered as well (sold separately). Most applications will receive MillerBuilt spec Hytuf axles, manufactured by STRANGE. Smaller spline count differentials (such as 28 spline or less) will most likely require 300M at a slight increase in price. Variables like car weight/usage,tire size/compound, Hp/Trq, etc. will determine this.
No inner axle seal required, nor do I recommend for street driven vehicles that will not see regular inspections of the inner seals.

https://millerbuiltusa.com/solid-axles/


I offer each application listed above with different caliper brackets to accommodate various brake manufactures.

Currently I can accommodate any brake kit made for:

C5/6/7 Corvette - OEM or Aftermarket (Wilwood/BAER/AP/etc.)
G5/6 Camaro - OEM or Aftermarket (Wilwood/BAER/AP/etc.)

*Although the BAER SS4+ is not offered in any of the above applications, I will soon offer a caliper bracket for folks who currently utilize a BAER SS4+ brake kit and are looking to re-purpose onto one of the above listed MillerBuilt Full Floater Kits. This is what was done for the Ridetech 48hr Camaro...

Hope this answers all your questions.