PDA

View Full Version : Mini tubbed 3rd Gen Nova tire Question


NOVA
02-10-2016, 06:03 PM
Will a 325/30/19 Tire (Michelin Pilot Sport example) fit without a lot of modifying other than the Mini Tubs - using a 19X11 Wheel, I Hear they will work with no issues, anyone got any facts/pics ?

Does anyone know if there are any 315/30/19's available ? I know 305/30/19's are.

This is a Street / Driver Car

Thank you!

98ssnova
02-11-2016, 12:05 PM
Anything can fit with enough modification. 325 should fit might need to massage the inner fenders some. I am going to try and fit a 345 tire in mine.

NOPANTS68
02-11-2016, 01:21 PM
I ran a 325 under my car with zero issues. Backspacing is critical obviously.

NOVA
02-18-2016, 05:28 PM
I ran a 325 under my car with zero issues. Backspacing is critical obviously.

what size wheel, 19 ? remember your backspace by chance ? thank you

Ketzer
02-20-2016, 08:06 AM
The only place on mine that is really tight, the front inner part of the tub down at the bottom.
I'm running 315/35 17s on an 11" wide wheel. My backspace wouldn't help you much unless your rearend has been narrowed the same as mine and you were looking for the same wheel dish I have (very little dish).

NOVA
02-20-2016, 08:10 AM
The only place on mine that is really tight, the front inner part of the tub down at the bottom.
I'm running 315/35 17s on an 11" wide wheel. My backspace wouldn't help you much unless your rearend has been narrowed the same as mine and you were looking for the same wheel dish I have (very little dish).

Thank you

henshman
04-27-2016, 08:00 PM
Just tubbed my 69...I went with an 18x11" wheel...the 315 tire selection isn't real good...may end up with a 305

Bad94
04-28-2016, 06:47 PM
I run 18x12 with 315/30/18 right now, but I have run a 335/30/18 No rubbing. My wheel tubs are DSE with alittle cutting and welding done to them.