PDA

View Full Version : Chassisworks crossmember 400/200-4r/4l60

fishface
01-01-2016, 05:11 PM
Item Location (City/State):Bunker Hill, Indiana

Price:$130

Description: I have a crossmember for Chassisworks subframe (1st gen Camaro) which fits the above transmissions. Doesn't fit a 4l70e, lol. Anyway, it is pretty much new with a few minor scratches from test fit which prevented return to Chassisworks (must be as sold condition). Part number on this is:5916-F10-03. Sells for $215 plus shipping. I will include shipping in the price in lower 48. Thanks!!
fishface
01-05-2016, 10:22 PM
Bump
fishface
01-31-2016, 07:05 PM
Price drop. $100
greycamaro
02-02-2016, 07:35 AM
If this will fit a stock subframe, I'll take it.
fishface
02-02-2016, 06:50 PM
Sorry, it just fits the Chassisworks subframe .
fishface
03-20-2016, 06:45 PM
Forgot I still have this. Surely someone needs it! Lol
Chassisworks
03-23-2016, 08:38 AM
If anyone wants to put this in a stock frame for a 67-69 Camaro or 68-74 Nova we make an adapter. There is an adapter for standard V8 and one for LS engines. http://www.cachassisworks.com/c-798-camaro-67-69-gm-f-body.aspx
mrgto69
02-28-2017, 01:58 PM
Forgot I still have this. Surely someone needs it! Lol
I know this is an OLD posting, but do you still have the cross member?...
Heather1124
02-28-2017, 05:32 PM
I'd been trying to figure out what crossmember I need for the 200 4R. The website only lists this as fitting the Turbo 400. Will any crossmember for the Turbo 400 work for the 200 4R?
mrgto69
02-28-2017, 08:19 PM
I'd been trying to figure out what crossmember I need for the 200 4R. The website only lists this as fitting the Turbo 400. Will any crossmember for the Turbo 400 work for the 200 4R?

The TH400 is it's own crossmember. I have one in my 69 FB with a newly rebuilt 200-4R and the end of the pan hits. I was going to modify my crossmember to fit, but people are trying to convince me to purchase one like this.
Heather1124
02-28-2017, 09:16 PM
The TH400 is it's own crossmember. I have one in my 69 FB with a newly rebuilt 200-4R and the end of the pan hits. I was going to modify my crossmember to fit, but people are trying to convince me to purchase one like this.

So this one is supposed to fit without drilling new holes or any modification besides the adapter for a stock subframe? I'd like to keep from drilling holes to modify something if I can. Have you heard of any others that would work? I have a 68 camaro and I'll be getting my engine and transmission in a few months. Any advice is much appreciated!