73camarols1
06-25-2015, 10:20 AM
Item Location (City/State):Boston Ma
Price:$6500 or $8000 with the extra parts
Description: I have a 1973 Camaro Z28 with @55K (title in hand and states milage), that I have owned since 2001. I have some history on the car going back. The body is in great shape except the quarters below the belt line (they were repaired using pieces from half quarters). But I do have full quarters, outer wheel housings, and trunk drop offs all from AMD. The body has DSE mini tubs and sub frame connectors installed. The firewall has been smoothed. It also has a DSE quadra installed. I started to narrow the rear end. Its a dana 60 from DTS with a posi and 373s. Quadra link brackets have been tacked in place on the rear end. I also have a Goodmark steel 2'' cowl hood. Most of the under side has been sand blasted. I have the chrome bumpers (in really good shape), all glass, dash pad and lower dash, rear seats (no fronts) and most of the rest of the interior. All the front sheet metal It was a running driving car before I started so the emblems and trim is there. I hang the front sheet metal so it looks like a car and assembled the rear so the car can roll. Rear tires and rims are TT2 with 315/35R17 and they look small in the mini tubs. You can text me at 508-962-9568. I'm working on getting pics up but can email or txt them.
Stock front sub frame:
-ever bushing and piece replaced with Moog replacement parts
- BPR LS motor and trans mounts ( the 1st design that works with F body oil pan)SE solid body mounts
*no sway bar, springs or shocks (plan was to buy DSE sub frame)
Other Parts For Sale Separately:
-Magnaflow 2.5 SS exhaust
-KORE3 rear E-brake assembly with GMR housing ends
-DSE brake booster and master
-ATS clutch master bracket and F-body clutch master
-DSE battery hold down and install kit
-Vintage Air GEN III super heat/ac/def
-Vintage Air brushed aluminum controller
-Vintage Air black bulk head
-3 boxes of dynamat extreme
Price:$6500 or $8000 with the extra parts
Description: I have a 1973 Camaro Z28 with @55K (title in hand and states milage), that I have owned since 2001. I have some history on the car going back. The body is in great shape except the quarters below the belt line (they were repaired using pieces from half quarters). But I do have full quarters, outer wheel housings, and trunk drop offs all from AMD. The body has DSE mini tubs and sub frame connectors installed. The firewall has been smoothed. It also has a DSE quadra installed. I started to narrow the rear end. Its a dana 60 from DTS with a posi and 373s. Quadra link brackets have been tacked in place on the rear end. I also have a Goodmark steel 2'' cowl hood. Most of the under side has been sand blasted. I have the chrome bumpers (in really good shape), all glass, dash pad and lower dash, rear seats (no fronts) and most of the rest of the interior. All the front sheet metal It was a running driving car before I started so the emblems and trim is there. I hang the front sheet metal so it looks like a car and assembled the rear so the car can roll. Rear tires and rims are TT2 with 315/35R17 and they look small in the mini tubs. You can text me at 508-962-9568. I'm working on getting pics up but can email or txt them.
Stock front sub frame:
-ever bushing and piece replaced with Moog replacement parts
- BPR LS motor and trans mounts ( the 1st design that works with F body oil pan)SE solid body mounts
*no sway bar, springs or shocks (plan was to buy DSE sub frame)
Other Parts For Sale Separately:
-Magnaflow 2.5 SS exhaust
-KORE3 rear E-brake assembly with GMR housing ends
-DSE brake booster and master
-ATS clutch master bracket and F-body clutch master
-DSE battery hold down and install kit
-Vintage Air GEN III super heat/ac/def
-Vintage Air brushed aluminum controller
-Vintage Air black bulk head
-3 boxes of dynamat extreme