View Full Version : Update on Stielow's Camaro X
Mark sent over this pic to post, along with an update on his progress. All the work on the drivetrain, plumbing, exhaust, exterior trim, brakes, fuel system, and chassis is done. He's working on the wiring and the interior. Here's a peak. :thumbsup:
Thanks Mark!
Rybar
06-26-2006, 04:48 PM
I love all of his builds, everything is just so perfect and to the point. :hail:
Nice! I also noticed it has a rear bar. :unibrow:
The pic looks great!
When will we be able to see the whole thing?
Teetoe_Jones
06-26-2006, 07:19 PM
SEMA 2006, booth # 23055.
Tyler
Datsbad
06-26-2006, 07:40 PM
Stock front subframe with DSE stuff, Rear Dse stuff, huh? Stuff must work !!!
But how would I know ???
Teetoe_Jones
06-26-2006, 08:26 PM
Stock front subframe with DSE stuff, Rear Dse stuff, huh? Stuff must work !!!
But how would I know ???
Technically, it only has DSE upper/lower control arms on the front which have little effect on the overall front geometry. The upper control arms retain the factory mounting locations, and it is topped off by AFX spindles, Bilstien coil overs, and (soon to come) ATS splined sway bar.
The LS7 install is very well done, should be a killer article.
Tyler
Steve1968LS2
06-26-2006, 08:35 PM
Technically, it only has DSE upper/lower control arms on the front which have little effect on the overall front geometry. The upper control arms retain the factory mounting locations, and it is topped off by AFX spindles, Bilstien coil overs, and (soon to come) ATS splined sway bar.
The LS7 install is very well done, should be a killer article.
Tyler
Sweet!
Can't wait to see it.. wish I could get my car into SEMA.. would be fun to cruise the strip afterwards..
olds87
06-27-2006, 09:51 AM
Is the article is going to be in the Hot Rod mag or something else?
MarkM66
06-27-2006, 09:58 AM
More pics please! :D
Datsbad
06-27-2006, 09:59 AM
Technically, it only has DSE upper/lower control arms on the front which have little effect on the overall front geometry. The upper control arms retain the factory mounting locations, and it is topped off by AFX spindles, Bilstien coil overs, and (soon to come) ATS splined sway bar.
The LS7 install is very well done, should be a killer article.
Tyler
my point was that i was surprised not to see some high dollar front subrame and the same for the rear . I was referring this info from what Mark told me on the powertour. Sorry if i was wrong
Teetoe_Jones
06-27-2006, 01:43 PM
I honestly think he would have run the new DSE frame if it was released in time.
Tyler
Datsbad
06-27-2006, 07:51 PM
Tyler , that clutch works PERFECT !! Thanks again
Teetoe_Jones
06-27-2006, 07:53 PM
;)
McLeod rules.
Tyler
Steve1968LS2
06-27-2006, 07:58 PM
;)
McLeod rules.
Tyler
Why yes they do.. and I can walk there for parts.. lol
McssGmachine
06-27-2006, 10:33 PM
Is he taking it to Woodward?
ohcbird
06-27-2006, 10:42 PM
Tyler-
Did you guys do the rear sway bar for that, or is this another DSE surprise?
tracy
06-28-2006, 08:28 AM
Tyler-
Did you guys do the rear sway bar for that, or is this another DSE surprise?
Yes, inquiring minds want to know!!
Teetoe_Jones
06-28-2006, 08:41 AM
We had nothing to do with the rear suspension. We did the LSX engine mounts, the LS7 dry sump oil pan, our tri-y stainless headers, our T56 install kit, and our AFX spindles. We will be supplying our Spline-Tune rate adjustable sway bar after we finalize the arms.
Tyler
HOT DAMN!
I can't wait to see this at sema...
Tyler,
thanks for the info
We will be supplying our Spline-Tune rate adjustable sway bar after we finalize the arms.
Tyler
Tyler, what arms? Come on and spill the beans :D
An inquiring customer wants to know...
olds87
06-28-2006, 11:52 AM
It's the end of the rear sway bar, I think.
http://www.lateral-g.net/forums/attachment.php4?attachmentid=3844
Teetoe_Jones
06-28-2006, 01:31 PM
Similar to that rear bar, but ours will go into a factory front sub. We just need to do a slight tweak to make the cost of making them lower.
That's all I will tell oyu for now. Those that have our catalog know what I'm already talking about.
Tyler
:captain: OK, I just looked at the catalog, now I know. Thanks.
trapin
06-30-2006, 07:29 AM
Is he taking it to Woodward?
I talked to Mark the day before yesterday and he told me it will indeed be there, he's just not sure "where exactly". He's trying to secure a spot. Actually he plans to have it finished sometime after the July Shutdown.
awr68
06-30-2006, 04:05 PM
Somebody PLEASE take a camera and a lot of pics for us that can't make it...thanks!! :D
awr68
06-30-2006, 04:08 PM
I noticed he bolted this SF to the SFCs, I bet the new DSE SF gets put under that car soon.....
Bowtieracing
07-01-2006, 08:23 AM
Is the article is going to be in the Hot Rod mag or something else?
Is it hot rod or phr ?
olds87
07-01-2006, 03:49 PM
Last time it was in Hot Rod mag. This time I don't know. That is why was asking that.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.