View Full Version : LS3 starter wiring?
jlwdvm
05-22-2015, 11:32 AM
I a have been plugging away on the wiring on my 69 firebird track/street car with an LS3 and AAW Power Plus 20 wiring harness. I ordered a pigtail for my LS3 GM starter, but don't know which wire off of the fuse block to run to it. I'm used to older GM starters/wiring that has an "s" and "r" post.
Vince@Meanstreets
05-22-2015, 12:16 PM
I a have been plugging away on the wiring on my 69 firebird track/street car with an LS3 and AAW Power Plus 20 wiring harness. I ordered a pigtail for my LS3 GM starter, but don't know which wire off of the fuse block to run to it. I'm used to older GM starters/wiring that has an "s" and "r" post.
just the purple 10g wire and your battery lead...run your main power to the battery or battery switch.
jlwdvm
05-22-2015, 12:37 PM
See page 5 for a diagram of my wiring harness. Thanks.
http://www.americanautowire.com/PDFLink/92968433%20510008%20IN%203.0.pdf
Vince@Meanstreets
05-22-2015, 11:28 PM
See page 5 for a diagram of my wiring harness. Thanks.
http://www.americanautowire.com/PDFLink/92968433%20510008%20IN%203.0.pdf
I see page 5. just use the purple wire to the s and the two bat+ leads to the big stud as shown.
http://www.americanautowire.com/shop/power-plus-20-kit
you should have this kit.
http://www.americanautowire.com/PDFLink/92964516%20500257%20IN%2010.0.pdf
jlwdvm
05-23-2015, 09:09 AM
I'll splice the GM pig tail onto the purple wire. I have the GM ignition with the Power Plus 20 kit. Thanks again.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.