Entropy Radiators now available from MCB!

[MCB Matt]

We have just agreed to sign up with Entropy as the demand for their product has been high and the reviews on quality/fitment have been great. We have done a lot of research on the product and we are confident these units will do a great job at a great price too!

We have some special pricing to offer you as well! Most Kits with Dual Fans are under $800!!

They make Rad's for MANY applications such as:
AMC, Buick, Chevy, Ford, Jeep, Mopar, and Pontiac!

They will also build customs.

LIFETIME WARRANTY!!!

Standard units use 1" tube and there is an option to upgrade to 1.25" tubes.

All units are fully welded, no epoxy.

LSX swap units are one of the most popular today. They offer both early and late style units (driver or pass side upper ports) and include the correct Steam Vent Port.

They come in a natural aluminum finish, but can be polished or powder coated.

They include an aluminum shroud and Dual fans as well.

Billet Filler neck and Stainless hardware

We strongly recommend their Fan controller which allows you to adjust the temp the fans come on at (160-215 Deg), allows you to run them at half speed start for a more gentle draw on your alternator, has an AC command input, and will work with your LS - PCM fan trigger or as a complete stand alone system as well!

Please Call, PM or Email with your application for a quote.

Thanks
MCB

First Gen F-Body unit:
http://www.entropyrad.com/images/source/6769_fbody_A4_PS.jpg

Polished Billet Caps:
http://www.entropyrad.com/images/cache/BilletCaps/Billet16PSI.220.png

LSX series Fan Control Module with wiring harness:
http://www.entropyrad.com/images/cache/FanControllers/FC03_small.180.jpg

[Ketzer]

PM sent. About time to upgrade my cooling.


Jeff-

[MCB Matt]

PM sent. About time to upgrade my cooling.


Jeff-

PM replied.
Thanks
Matt

[Moose]

hopefully someone that has one, or knows better then me will chime in. Going to order one. But, I've done away with all the wiring from the ls harness that i Wasn't using.. (the fan stuff)

Is there a controller that I can buy and wire in some how for on and off for temps? I have no idea what wire it is, and I'd have to pay tuner to set up.. etc...

[MCB Matt]

The controller offered by Entropy will run the fans 100% independent of the LS or any computer. It can be triggered by its own sensor and programmed for on/off temps and can start the fans at half speed so the alternator doesn't take such a hard hit every time they spin up. It also has an AC input trigger you can run from a Trinary switch or any trigger you choose. It can be mounted in the car or under the hood, the wire length included is quite long.

They use 10GA wire and dual 40A fuses too.

OE non corrosive sensor. A bung for it can be installed at no extra cost or you can run it in the head.

160-215 turn on range

Take a look at it in entropys site under harness kits

Matt

[Moose]

The controller offered by Entropy will run the fans 100% independent of the LS or any computer. It can be triggered by its own sensor and programmed for on/off temps and can start the fans at half speed so the alternator doesn't take such a hard hit every time they spin up. It also has an AC input trigger you can run from a Trinary switch or any trigger you choose. It can be mounted in the car or under the hood, the wire length included is quite long.

They use 10GA wire and dual 40A fuses too.

OE non corrosive sensor. A bung for it can be installed at no extra cost or you can run it in the head.

160-215 turn on range

Take a look at it in entropys site under harness kits

Matt

thanks Matt.. I'll get back with you in a few weeks after vacation to get it ordered.:thankyou:

[MCB Matt]

Ok, sounds good. Enjoy your vacay!

Thanks
Matt

[Dipped]

Those look awesome! And the price is more than reasonable. Are they manufactured stateside?

Thanks.

[ProTouring442]

I've had an Entropy in my daily driver Jeep for about a year now. Works great. I would highly recommend them.

[MCB Matt]

Those look awesome! And the price is more than reasonable. Are they manufactured stateside?

Thanks.

Yes, they are made here in the US.

Let me know if you need a price, we are also now offering PRC radiator packages as well.

Thanks
Matt

[pro66tour]

Pm sent Matt...

[MCB Matt]

Pm sent Matt...

PM replied
Thanks
Matt

[Sonar Chief]

Matt, sent you a pm.

Thanks,
Michael

[MCB Matt]

Matt, sent you a pm.

Thanks,
Michael

Just replied
:thankyou:
Matt

[brad900]

Matt,
Sent you a PM

[MCB Matt]

Matt,
Sent you a PM

PM replied.
Thanks
Matt

[jsr69]

PM sent.

[MCB Matt]

PM sent.

I have not received a PM from you here on LatG.

Thanks
Matt

[jsr69]

Should be there now.

[MCB Matt]

Should be there now.

Got it and sent your quote.
Thanks
Matt

[DT69Cam]

PM sent, thanks.

[MCB Matt]

PM sent, thanks.

Replied, thanks.
Matt

[DT69Cam]

PM sent.

[MCB Matt]

PM sent.

PM replied.

Thanks and happy new years,
Matt

[DT69Cam]

PM replied.

Thanks and happy new years,
Matt

E-mail left for Paypal. Thx Happy New Year to you and yours as well!!

[MCB Matt]

E-mail left for Paypal. Thx Happy New Year to you and yours as well!!

Good morning, just got it sent over to you. Thanks again for the order.
Matt