Exhaust for torque arm suspension

[cwylie]

Is there anything out there out of the box that fits or even fits with a little modification on a first gen Camaro?

[Ketzer]

I built my own 3 inch system from header to muffler (oval pipe) but used Torque Tech tailpipes weblink (http://www.torquetechexh.com/GMFHeader.html). They have a full system that uses the H pipe instead of the X.

I didn't think 3 inch tailpipes would fit but they're stuff was spot on.



Jeff-

[Blake Foster]

I do not know of anything. We have always built our own. I would LOVE to be able to provide one but it is just not our business. I don't think it matters WHICH rear suspension you buy, I don't know of any out of the box systems that will fit with DSE , Ridetech, TCI, Morrison

[ironworks]

Is there anything out there out of the box that fits or even fits with a little modification on a first gen Camaro?


Does any part for any of these car ever bolt right on? A little modification is just the NORM.

Alot of Modification is the usually the status quo. Just way to many variables? Ride height, Mini tubs, fuel tank, Shock angle, Cost to end user.

[cwylie]

I was hoping for a bolt on but didnt expect one. I thought maybe someone would know a kit that was close and could be modified. How about some pictures of how everyone ran their exhaust with the torque arm?

[Ben@SpeedTech]

Check these links. You have to click on the photo you want to view, then click on "stop" at the bottom then scroll back up to view it for an extended time. Our

Red Zed 69 Camaro (http://www.speedtechperformance.com/index.cfm/page/ptype=product/product_id=267/category_id=7/mode=prod/prd267.htm)

68 Nova (http://www.speedtechperformance.com/index.cfm/page/ptype=product/product_id=291/category_id=7/mode=prod/prd291.htm)

Jim's 69 Camaro (http://www.speedtechperformance.com/index.cfm/page/ptype=product/product_id=319/category_id=7/mode=prod/prd319.htm)