Time Has Come to Sell!!!

[badazz81z28]

Please Delete.

[Rick D]

TK0 price??

[grif54]

Where did the steering box come from? What ratio is it? I have a 71 Chevelle, I think it will work but not sure. Do you know? Thanks.

[Vince@Meanstreets]

Where did the steering box come from? What ratio is it? I have a 71 Chevelle, I think it will work but not sure. Do you know? Thanks.

Yep it will work, you'll have to get a new rag joint for it. You can re use your power steering pitman arm.

[CamaroMike]

is the brake set up front and rear?

[31069ss]

Tko price as well im
Not too far from you

[simbad's68]

X2 on the gear box ratio. I beleive it will fit a fist gen as well with a new rag joint.

[grif54]

Thanks Vince. Appreciate the info.:thumbsup:

[badazz81z28]

Where did the steering box come from? What ratio is it? I have a 71 Chevelle, I think it will work but not sure. Do you know? Thanks.

Its for a 70-81 Camaro. Its this one:http://www.rickscamaros.com/camaro-600-power-steering-gear-box-plated-12-7-1-1970-1981.html

I bought it from Rick's Camaro

[badazz81z28]

The KORE is only for the front. The TKO alone is $2000, it has about 2500 miles on it. I had a tremec dealer go thorugh it and install carbon fiber rings in it last sumer (cost me $600). I will throw in the tremec to LS quicktime bell for another $350

[BanditDave]

What is included in the Ricks tank. Very interested! Pics if possible.

[grendel]

Its for a 70-81 Camaro. Its this one:http://www.rickscamaros.com/camaro-600-power-steering-gear-box-plated-12-7-1-1970-1981.html

I bought it from Rick's Camaro

I will take it, if it doesn't step on anyone's toes.

PM me your PayPal address.

[Carbo]

What hydraulic setup are you selling? Also interested in the QT Bellhousing. Any photos???

[badazz81z28]

What is included in the Ricks tank. Very interested! Pics if possible.

Ricks Tank, 255 Walbro in-tank pump, 0-90 OHM sender, I have no use for the Corvette Filter/Pressure reg if you want that,

I will get pics of the pump and the tank


Edit, I had Rick move the out/inlet (not seen below) to clear the tank strap.
http://i19.photobucket.com/albums/b151/badazz81z28/Ricks.jpg

[BMR Sales]

Can't believe someone didn't buy the whole car!

[Mac&Otto]

Item Location (City/State): Edwards CA

Price: Varies

Description: Sec Gen Camaro Parts!


Lets start selling, Tell your friends...Nastyz28.com


1975-81 F-body Rick's Stainless FI Tank, Notched for mini-tubs, Walbro 255 upgrade. Asking $1000

GM 600 Steering Box, less than 1000 miles on it. Plated, cost $570! Comes with hardware. Asking $400

KORE3 C5 set-up, Spindle, Hubs, Brackets, and solid spacer upgrade. All you need is rotors and calipers. New from KORE3 would be $550 and you get already modded spindles! asking $600

TKO 600, carbon fiber blocker ring upgrade, Quicktime Bell, Hydraulics etc.

Can you tell me the difference between the 70-73 tank vs 75-81?

Thanks., Cal

[Mac&Otto]

Can you tell me the difference between the 70-73 tank vs 75-81?

Thanks., Cal

Sorry, the photo didn't show on my iPad at first, now I see the configuration is considerably different.

[69 muscle]

what spline input on TKO?

[badazz81z28]

what spline input on TKO?

26 spline input, big output ( I think 31 spline)

The 70-74 tank is flat on top. The 75-81 capacity is bigger hence it has a hump on the passenger side.

[badazz81z28]

http://i19.photobucket.com/albums/b151/badazz81z28/c52_zps6dd22384.jpg

[grendel]

Hi, steering box? How do you want your money, if it's to me?

[badazz81z28]

Hi, steering box? How do you want your money, if it's to me?

Sorry about that! PM sent.

[grendel]

Sorry about that! PM sent.

Money sent for the Delphi 600 box.

[glassman]

BTw, i sent my Ricks tank back to them to take care of some issues, I shipped it after i rinsed it out with soap and water(twice), cost about a 100 to send it back to them. If somebody wants it, its not too bad to do ( i had almost no smell left and 0 chance of flare up, and i plugged the holes with foam/rags).

[badazz81z28]

BTw, i sent my Ricks tank back to them to take care of some issues, I shipped it after i rinsed it out with soap and water(twice), cost about a 100 to send it back to them. If somebody wants it, its not too bad to do ( i had almost no smell left and 0 chance of flare up, and i plugged the holes with foam/rags).

If someone wants me to ship it and peform the above, I can do that

Rob

[badazz81z28]

PS Box Sold!

[badazz81z28]

Buehler....Buehler...Anyone interested else? :y0!:

[badazz81z28]

X-Mas Eve Bump

[badazz81z28]

Transmission sold