Wheel offsets on new Z28??....

[Ketzer]

I know from the rags, they are 19x11 and 19x11.5 but does anyone happen to know the offsets/backspacings? I'm thinking they would look pretty nice on my daily....


Jeff-

[Ketzer]

Thanks!
I could work with the 5x120 but I will have to do a little calc on that backspace and the 11.5 width... may be a little too aggressive.

And I'm assuming the wheels are even available yet from GM...


Jeff-

[slenning]

Jeff the wheels are available but you have to give your Z28 vin number to buy them from GM at this point. Wouldn't be too hard to get though, there's a couple of sets for sale on Camaro5 forum already.
I just got a set of them and mounted some Michelin's for a street set for my Z. I had that same thought to see if I could bolt them on my 70 Camaro. I will measure the backspace on the front wheels today but the other day I did a quick measure and thought they were in the 6 1/2" range. The center hole in the back of the wheel is too small to fit the hub on my DSE spindles too, and I hadn't even checked the bolt circle :D

[Ketzer]

Ouch... there's no way a 6.5 backspace on an 11" wheel is going to fit the front of my Vagon...:snapout: unless I'm going for the skateboard look... or taking it to RS for one of their mega flare jobs.


Jeff-

[Rick D]

Jeff the rear's have a 7.4375 back space. If I get time I will measure to front's tomorrow. Also the Camaro has a different bolt circle. I think it's a 5 on 120mm. My 2015 Z/28 has 14mm axle studs.

Wait what??? Um when did you get a Z/28???? :warning:

[Ketzer]

Wait what??? Um when did you get a Z/28???? :warning:

All the cool kids have them now....

[dhutton]

Z/28 wheel specs:
Fronts: 19x11 ET11
Rears: 19x11.5 ET26

[Ketzer]

Z/28 wheel specs:
Fronts: 19x11 ET11
Rears: 19x11.5 ET26

Thank you sir. Unfortunately they won't work on my ride.

[syborg tt]

If you jump on Camaro5.com Needforspeed is making a knock off set in 20 x 10 and 20 x 11 with zl1 / 1le back spacing. If you jump in know there just shy of $1300 shipped.


Marty-mj
www.garagescene.net www.syborgtwinturbo.com www.2ndcamaro.com

[Ketzer]

Thanks for the info Marty!
Don't really want to make the jump to 20s though. Not a fan of super short sidewalls on our crappy streets. I did pass the info along to the Caddy forum though cuz some of those guys seemed interested.... and that wheel style is killer.



Jeff-

[syborg tt]

Your welcome


Marty-MJ
www.garagescene.net

[dhutton]

If you jump on Camaro5.com Needforspeed is making a knock off set in 20 x 10 and 20 x 11 with zl1 / 1le back spacing. If you jump in know there just shy of $1300 shipped.


Marty-mj
www.garagescene.net www.syborgtwinturbo.com www.2ndcamaro.com

http://www.camaro5.com/forums/showthread.php?t=383648

[dhutton]

Z/28 wheel specs:
Fronts: 19x11 ET11
Rears: 19x11.5 ET26

I am not 100% certain of my math but I think these might just fit a 69 Camaro with an AME front subframe with Anvil wide fenders and a stock width (59.5") minitubbed rear end. Not sure how it would look though...

Don