PDA

View Full Version : Speedtech is offering free ATS spindles...


Ben@SpeedTech
11-04-2014, 09:53 AM
Hey folks, if you haven't heard about Speedtech Performance’s complete '67-69 Camaro or '68-74 Nova Pro Touring Subframe it's time to check it out. All sales BS aside, our subframe flat works and has all the engineering and key front suspension components to make your car able to take on the best of the best at the track yet still give you a decent ride for daily cruising. It's way better than a stock frame and has features that no other aftermarket frame has. To make this package even better, for the month of November we're including a set of ATS drop spindles for FREE! This deal is like getting an $850 early Christmas present!

To see all the features and benefits of this sale package and why it can help you click here (http://www.speedtechperformance.com/index.cfm?ptype=product&product_id=405&category_id=-1&mode=prod). If you have any questions about this deal or any of our other products, feel free to give us a call at 435-628-4300 and we'll get you taken care of. Hurry though, this sale is only until November 31st!

Ron in SoCal
11-04-2014, 10:43 AM
Ben that link and the email Roger sent out lists the 2013 ZR1 bearing. Can you verify that is correct?

Smokin' deal for ST customers either way. More so with that 33 spline HD bearing upgrade. :cheers:

Blake Foster
11-04-2014, 11:13 AM
They are the ZR1 bearing (2014 Corvette)
they are not Splined. these are FRONT hubs.

Ron in SoCal
11-04-2014, 12:50 PM
^ I knew you'd know :D

Blake Foster
11-04-2014, 01:40 PM
Guess I Should ................

MillerBuilt
11-05-2014, 06:41 PM
They are the ZR1 bearing (2014 Corvette)
they are not Splined. these are FRONT hubs.

Blake, are you sure these are 2014 ZR1 bearings? Last year for the ZR1 was 2013

And I am thinking they are not 2013 ZR1 either if they are not splined, because 2013 ZR1 hubs (even front) are splined...

Could be other parts out there that I am not aware of so feel free to correct me if I am wrong.

Blake Foster
11-07-2014, 08:50 AM
Blake, are you sure these are 2014 ZR1 bearings? Last year for the ZR1 was 2013

And I am thinking they are not 2013 ZR1 either if they are not splined, because 2013 ZR1 hubs (even front) are splined...

Could be other parts out there that I am not aware of so feel free to correct me if I am wrong.

They are 2014 Corvette hubs SAME as the ZR1 (larger housing with extra bearings in the housing. thicker flange ) I know the ZR1 was over in 13 but it is the easiest way to advertise them,