Matt's Classic Bowties and Art Morrison

[dhutton]

I just picked up a good sized crate of suspension parts. The entire purchase from start to finish was smooth and trouble free. Thanks to Matt, Kim, and the folks at AME. I even received a message from Matt Jones, the designer, asking me to feel free to email him with any questions. I don't think you can ask for more. I highly recommend these folks.

Thanks,
Don

[MCB Matt]

Looks like you have a LOT of work ahead Don!!!

Thanks again for putting your trust in MCB for this very large purchase, we truly appreciate your business and look forward to continuing to provide your parts throught the build.

:thankyou:

Matt

[Spiffav8]

That's a lot of fun right there! Jealous you got the IRS setup.

[dhutton]

That's a lot of fun right there! Jealous you got the IRS setup.

It will be a while before this project is complete and on the road but I am looking forward to it. I was hurting a little over the cost of the IRS and went with the lower cost entry level 700 hp version on assumption that if and when I ever blow it up I could upgrade to a stronger version. The ZL1 diffs are available on ebay from time to time.

Don

[Spiffav8]

It will be a while before this project is complete and on the road but I am looking forward to it. I was hurting a little over the cost of the IRS and went with the lower cost entry level 700 hp version on assumption that if and when I ever blow it up I could upgrade to a stronger version. The ZL1 diffs are available on ebay from time to time.

Don

Yeah it's not cheap, but from all the feedback I've heard from Mary and David Pozzi it's worth every penny. Hope you'll post up a build thread and show the install!

[dhutton]

I usually don't post my junk on this site but maybe I will give it a shot this time. I am just finishing a 68 Charger R/T restomod for a friend and hope to get started on the Camaro over Thanksgiving. I've got a big pile of sheet metal and Anvil Auto parts to work through too.

Don