68 Camaro A/C dash vent seals

[DEIGuy38]

50930

Can someone please help me out on which seal to use inside the dash vent retainer (black part). If I use the seal on the left it is too large and will not let me install the retainer in the bezel and the ball won't rotate. If I use the seal in the middle and right they don't seem to be wide enough and the ball grabs and wants to pull them out. I cant find any instructions on these. Does anyone have pics of theres or advice.

[72Z/28]

Well I had to order the chrome AC vents for my 68 Camaro as well. I ordered the seals, and ran into the same issues as well. I ended up keeping original seals because they seemed to be more robust and the material of construction was way better than the aftermarket ones.

[DEIGuy38]

Well I had to order the chrome AC vents for my 68 Camaro as well. I ordered the seals, and ran into the same issues as well. I ended up keeping original seals because they seemed to be more robust and the material of construction was way better than the aftermarket ones.

Wish I had the option to keep the original seals. The person who had the car before me removed the ductwork and had little speakers in the bezels. Guess I will call classic industries or figure something out.

[130fe]

If you are going to order new ones, get the ones that Vintage air sells, they are plug and play without any extra seals. The part number I believe is 49306-vcl. For some reason I can't post the picture of the one I have. Will try tomorrow. The part number is from their catalog http://www.vintageair.com/2014catalog/Pages%20from%202014%20VintageAir%20Cat%20rev%208-15%2019.pdf

[130fe]

Here are the ones I bought from Vintage Air-

[DEIGuy38]

Thanks for the info Chris. Dang wish I would have seen these before I bought new ones from classic industries.