Power steering fitting

[fillpot]

Guy's I no this has been touched on several dozen times but does anyone make a fitting for the corvette power steering pump that gets below or away form the power steering pulley some what to connect the power steering hose. THANKS!

[Vince@Meanstreets]

Check with DSE, they have a few options.

Link at the left header. <<<<<

[130fe]

Yes, the dse one fits like a champ- http://www.detroitspeed.com/Steering/090401-steering-pump-outlet-fitting.html

[fillpot]

Thanks guys, chris is it a little longer or something?

[southsidehacker]

Talk to the boys over at Turnone . They have what you need and are great to work with!

[130fe]

Yes, it is a little longer.

[DETON8R]

I'm not at the place of needing this yet, but will when I get to my steering lines. Thanks for posting!!

[southsidehacker]

http://www.turnone-steering.com/Extended-AN-6-Flow-Restrictor-Fitting_p_30.html

[jlwdvm]

I am getting ready to install this one on my pump: http://www.turnone-steering.com/Extended-AN-6-Flow-Restrictor-Fitting_p_30.html

I had to install a smaller pulley on the pump than what came with my pump because of a clearance issue with the A-arm. Is there a fitting on the pump already that I have to remove before I install this one...do these pumps come with a restrictor already installed?