Anvil 1st Gen Hoods 25-45% off

[ANVIL1]

Item Location (City/State): Los Angeles, CA

Price: $475 and up

Description:
Hey Everybody, this is Matt from Anvil Auto!
We have a few nice hoods with minor blemishes looking for a good home. Anyone in the So. Cal. area is welcome to set up an appointment to come by and look at these hoods or any other parts we have in stock. Anybody interested can email me at: [email protected]

First on the block, we have a 100% carbon fiber hood that is glossy on the top side and has a matte finish on the underside. It has some resin build up in the rails which you can kind of see in the pictures below, but it's not real noticable. It's a really nice hood and we are blowing it out at $975 which is just a little more than our carbon/fiberglass hood goes for!
http://i219.photobucket.com/albums/cc95/anvil_auto/Hoods/photo1_zps5cd3fb15.jpg
http://i219.photobucket.com/albums/cc95/anvil_auto/Hoods/photo1_zps7211163e.jpg
http://i219.photobucket.com/albums/cc95/anvil_auto/Hoods/photo2_zps1e696980.jpg
http://i219.photobucket.com/albums/cc95/anvil_auto/Hoods/photo3_zps877e2ff9.jpg

Next up, we have a full carbon, "Bare" hood which means it has no understructure in the middle, so these are the most lightweight hoods we make. This particular hood is even lighter than usual. The only issue it has it that the top skin is a little wavy in a couple places which is only noticable when viewing at an oblique angle in certain light. It's really not that bad unless you are building a 100 pt. showcar. This hood is perfect for a race car or street car that gets driven. $750 + shipping and it's yours!
http://i219.photobucket.com/albums/cc95/anvil_auto/Hoods/photo4_zps5c4d7b37.jpg
http://i219.photobucket.com/albums/cc95/anvil_auto/Hoods/photo1_zpsb8fc341a.jpg
http://i219.photobucket.com/albums/cc95/anvil_auto/Hoods/photo2_zps18cc4c64.jpg

Lastly, we have a carbon fiber/fiberglass hood that has a couple areas that are hazy. You may be able to come up with a paint scheme to work around the areas to leave some carbon exposed, or just paint the whole thing to cut down on some weight. I'm blowing this one out at $475.
http://i219.photobucket.com/albums/cc95/anvil_auto/Hoods/photo4_zps935e17d4.jpg
http://i219.photobucket.com/albums/cc95/anvil_auto/Hoods/photo1_zps9deaaa17.jpg
http://i219.photobucket.com/albums/cc95/anvil_auto/Hoods/photo2_zps754102a6.jpg

[Payton King]

How much does the "bare" hood weigh?

[68vert]

Hi Matt, I sent you an email regarding these hoods to fulfill my order from April 2013. thanks!

[ANVIL1]

How much does the "bare" hood weigh?

18lbs!

[Rick D]

Hey Matt anything for us 2nd gen guys??

[Sanchez Garage]

any 70-72 chevelle hoods?

[ANVIL1]

Hey Matt anything for us 2nd gen guys??

Yeah, we've got a couple flat hoods and power bulge hoods that I will put on a separate post. We also have some other parts.

[ANVIL1]

any 70-72 chevelle hoods?

No Chevelle hoods, sorry! We do have an SS instrument panel overlay, however.

[Rick D]

Yeah, we've got a couple flat hoods and power bulge hoods that I will put on a separate post. We also have some other parts.

Cool!!! I really want a flat hood and a RS header panel? They are going to get painted other then a strip I'm going to do.

[Build-It-Break-it]

Just got a Carbon fiber hood, trunk and header panel from Matt. Super nice guy and nice parts. Thanks again Matt I appreciate everything.

[glassman]

Rick gets first dibs on the 2nd gen flat, i'll take the 2nd for my 2nd, i'm ready so pm me asap. Like to get it b4 tues if possible...i'll try and call y'all tomorrow....Mike

[grif54]

PM sent about Chevelle overlay.

[ANVIL1]

Rick gets first dibs on the 2nd gen flat, i'll take the 2nd for my 2nd, i'm ready so pm me asap. Like to get it b4 tues if possible...i'll try and call y'all tomorrow....Mike

I have 2nd gen two flat hoods. Both are satin finish carbon/fiberglass and both have damage that could be fixed by someone who knows how to work with composites (fiberglass). e-mail me at: [email protected] and I can send pics and pricing.

[Rick D]

I have 2nd gen two flat hoods. Both are satin finish carbon/fiberglass and both have damage that could be fixed by someone who knows how to work with composites (fiberglass). e-mail me at: [email protected] and I can send pics and pricing.

Email sent!! :thumbsup: