1965 300 dr post "Project Track Car"

[chris_65]

I guess it's time I started a build thread for my next project. This is my fourth build, but first time for the whole build thread thing, so bare with me...I started a build thread over on Team Chevelle several months ago and decided that I needed to start one here as well. I'll try and catch everyone up to speed on the build. I also have a build page on Facebook (https://www.facebook.com/pages/Chris-65-Malibu-300-Track-Car-Build/302271649932334?ref=bookmarks) In the past 25 yrs, I've restored a 1970 Pontiac Lemans sport convertible 400/4spd, 1955 Chevy Bel-air 2dr sedan and recently a 1965 Malibu SS convertible (the car my father bought wrecked when I was 14yrs old. 20 yrs later, I located the car and restored it) I've always built the cars to a more original condition, but this build is going in a different direction.

Two years ago while at the Goodguys show in Indy, a friend of mine (Tom McBride) was driving the LS equipped Ridetech 66' Chevelle and asked if I wanted to do a ride a long. After the first lap, I was hooked. Then last year while attending the Bowler Transmission's carshow in southern IL. with my 65' convertible, I met Aaron Oberle and his LS powered 65' Chevelle on the autocross. I asked question after question and even tagged a long for a couple of laps. This was enough to re-spark my interest in building a autocross/road course car.

For this build, I was able to find a wrecked 2002 Trans-Am backed by a T56 6 speed trans and 41,000 miles on the odometer. I stripped the TA of everything I thought that I'd eventually need.

Next, it was time find the LS a home...
I spent several months, looking at reasonable priced bodies that were rusted in half or ones that were higher priced and too nice to cut up.
Then, I came across a 65' 300 Deluxe 2dr post car. It had been stripped to a bare shell, reworked floorboards and in primer. With it being just a shell and most of the original parts gone and a non SS, I wouldn't feel so bad when it came time to start cutting.

The plan is to build the car on a budget, do most the work myself with the help of a few friends and possibly look for some sponsorship.

Future plans for the car:
LS1 & T56
Boxed and narrowed frame for wider tires
Mini-tubs
9" Ford or GM posi rear-end
Front & rear complete Ridetech coil-over suspension kit
Ridetech tubular front & rear control arms
Brakes from either the TA, C6 or Wilwood
18" wheels front and rear (Forgeline or Vintage Wheel Works v40s)
Smoothed firewall
paint is undecided (either charcoal, 69' Chevelle blue or red)

[chris_65]

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/20131230_171228_zps8002d6b5.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/20131230_171228_zps8002d6b5.jpeg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/20140114_094853_zps0cbaf23a.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/20140114_094853_zps0cbaf23a.jpeg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/20140113_144942_zpsd38d2068.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/20140113_144942_zpsd38d2068.jpeg.html)




This is how the car looked when we picked it up in St.Louis

[Rick D]

Nice, I love the post cars!! Let's some more?

[chris_65]

3-15-14 Back home in Indiana...

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/10_zpsb091e11c.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/10_zpsb091e11c.jpeg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/8_zps27c58af4.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/8_zps27c58af4.jpeg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/4_zpscd80e272.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/4_zpscd80e272.jpeg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/3_zpsa6780608.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/3_zpsa6780608.jpeg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/2_zps660d0652.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/2_zps660d0652.jpeg.html)

[chris_65]

Getting acquainted with it's stable mate...

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/13_zps95907a42.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/13_zps95907a42.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/15_zps0dd6c6bf.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/15_zps0dd6c6bf.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/16_zpsea1c20cd.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/16_zpsea1c20cd.jpg.html)

[chris_65]

Let the build begin!

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/22_zpse80c402b.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/22_zpse80c402b.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/39_zpsfddfdb90.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/39_zpsfddfdb90.jpg.html)

The LS is waiting to go in!

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/35_zps1c13c05b.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/35_zps1c13c05b.jpg.html)

[chris_65]

Mocking up the section of the TA firewall that the clutch, brake and gas pedal assembly bolts to. This will also allow me to use the TA's brake and clutch MC.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/30_zpsb1253e12.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/30_zpsb1253e12.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/43_zpsafda774f.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/43_zpsafda774f.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/40_zpsef2c060d.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/40_zpsef2c060d.jpg.html)

This will also allow me to use the TA's pedal assembly as well.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/46_zps870d4ff6.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/46_zps870d4ff6.jpg.html)

[chris_65]

The firewall section in place. I also noticed that I will have to relocate the wiper motor, it comes in contact with brake booster. I was going to smooth the firewall anyway,so I'll tackle that later...

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/50_zps32ee5ac4.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/50_zps32ee5ac4.jpg.html)

[chris_65]

Since I got this car basically as a shell, I'm looking for a few items:

Rear seat
other misc. interior parts
drip rail moldings

A lot of this stuff will also work off a 64-65 4dr, I believe.

[chris_65]

I finally got the engine plates!

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/59_zps59f7f9e0.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/59_zps59f7f9e0.jpg.html)

[chris_65]

I read about a lot of A-body owners swapping their old steering box for one out of a mid 90's Grand Cherokee. So I made a trip to the U-pull -it yard and picked up one for $20 including the GC steering shaft. It's about 2.5 - 3 turns lock to lock. Cleaned and painted, it bolted right up. I also cut the original steering shaft and ground down the end, so I could bolt up the GC shaft. This is just for mock up, I'll be installing a new column from I Did It or Flaming Rivers in the near future. I also looks like I'll be able to thread the LS PS lines into the GC box.

[chris_65]

The first of many attempts of getting the LS to sit down in it's new home. I ended up unbolting the frame mounts, bolt the to the engine and positioning the engine where I wanted it. As you can see, I'm still running the alt. in the stock lower position. I have about 1/2" clearance between the alt. and the GC steering box. I've got about 1" between the firewall and passenger side head. I also need to order a new PS pump pulley, the original got shattered in the TA's wreck.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/68_zps75cac00e.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/68_zps75cac00e.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/67_zpsb0f06216.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/67_zpsb0f06216.jpg.html)

[chris_65]

Now to relocate the wiper motor and body harness holes. The wiper motor will go under the driver side fender and the body harness will move over a couple of inches for now. Once I smooth the fire wall, I'll wait until I see what wiring harness I use before making that hole.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P1010158_zpsc740b1d3.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P1010158_zpsc740b1d3.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P1010160_zps84a9fd73.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P1010160_zps84a9fd73.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P6040162_zps08d97bb5.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P6040162_zps08d97bb5.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P6040166_zpsb18de176.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P6040166_zpsb18de176.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P6040170_zpsbe9b2d20.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P6040170_zpsbe9b2d20.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P6040173_zps68e6dfe7.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P6040173_zps68e6dfe7.jpg.html)

[chris_65]

On 6-3-14 - I sent my LS engine harness and ECM out to Jeff @ my-efi.com in New York. He received it Thursday and gave me a call to go over what all I wanted done. He's going to trim down the harness, add relays, ORBII port and it will be a 3 wire hook up. He's also going to flash the computer, but is going to leave the stock specs for now until I find another rear end and figure out what tire/wheel I'll be running. He said that I should get it back in a couple of weeks. My cousin and I were going to tackle the harness ourselves, but for the price Jeff is doing them for, it was a no-brainier.

[chris_65]

Making a template for the firewall...

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P6080178_zpsfd8eef4e.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P6080178_zpsfd8eef4e.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P6080177_zps1fb65717.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P6080177_zps1fb65717.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P6080175_zps9a308a2a.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P6080175_zps9a308a2a.jpg.html)

[chris_65]

With the help from my cousin Norb, an automotive professor at our local college, we used their metal shear to cut the metal for the firewall. Hope to start tacking it in, the next day or so...
I also pulled out the engine again, so I could have better access for welding up the firewall.

[chris_65]

Small update: I've just got back from taking the family on a much needed vacation. Before we left, I was able to start tacking in the firewall (pics to follow). Also while we were gone, I received the reworked harness and computer, from My-EFI.Com. When I opened the box, I was pleasantly surprised... Everything was clearly marked and re-loomed.
Now I'm trying to figure out the easiest fuel system, without breaking the bank.
I know a lot of people are running Rick's tanks, but that's way out of my budget. I'll be doing some research and explore my options

I'm planning on running hard lines and a Corvette filter/reg.
I need your feed back or suggestions...

Thanks,

[chris_65]

Starting to get the firewall tacked in...

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/image_3_zps1591be5c.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/image_3_zps1591be5c.jpeg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/image_4_zps0bf3a42c.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/image_4_zps0bf3a42c.jpeg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/image_5_zps1ea34192.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/image_5_zps1ea34192.jpeg.html)

[chris_65]

Pictures of the reworked harness I received from my-efi.com out of New York. So far I'm pleased with service.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/image_1_zps81af4aec.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/image_1_zps81af4aec.jpeg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/image_6_zps6390985e.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/image_6_zps6390985e.jpeg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/image_7_zps72ea8b53.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/image_7_zps72ea8b53.jpeg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/image_8_zps616dd8a5.jpeg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/image_8_zps616dd8a5.jpeg.html)

[chris_65]

Small update: Finally have some paint on the smoothed out firewall. I'll have to finish the lower areas of the toe boards, when I get to point where I can take the body off the frame. I'll also have to finish the trans tunnel once the engine is where I want it. Next step is to get the engine reinstalled so I can lay out the reworked harness and see where everything is going to go. Still trying to decide which way I'm going to go as far as fuel tank/pump.

Final prime:

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/firewall1_zpsa46f4e0f.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/firewall1_zpsa46f4e0f.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/firewall2_zpsdef498a1.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/firewall2_zpsdef498a1.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/firewall4_zpsc3b379da.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/firewall4_zpsc3b379da.jpg.html)

Paint:

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/firewall7_zps21dbbf17.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/firewall7_zps21dbbf17.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/firewall9_zps6c2eaf5f.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/firewall9_zps6c2eaf5f.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/firewall11_zps9d686709.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/firewall11_zps9d686709.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/firewall12_zpscd855651.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/firewall12_zpscd855651.jpg.html)

[chris_65]

I got the engine sitting back in the frame and started routing the reworked harness.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/enginepics2_zps52d3925e.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/enginepics2_zps52d3925e.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/enginepics1_zps87369b6e.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/enginepics1_zps87369b6e.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/enginepics4_zps4e5881d7.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/enginepics4_zps4e5881d7.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/enginepics3_zps66d2765d.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/enginepics3_zps66d2765d.jpg.html)

[chris_65]

Over the weekend, I got a lot accomplished:
Saturday - Brake and clutch master cylinders bolted on.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/7-20-14_zps62766e39.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/7-20-14_zps62766e39.jpg.html)

Trans Am's pedal assembly bolted in.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/7-20-1414_zps143552a5.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/7-20-1414_zps143552a5.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/7-20-1410_zpsfdbe6411.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/7-20-1410_zpsfdbe6411.jpg.html)

Computer and relays mounted nicely under the dash. I was able to use the original ECM holder and made brackets to mount it securely under the dash.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/7-20-145_zpsb4d146c1.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/7-20-145_zpsb4d146c1.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0575_zps7c913b34.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0575_zps7c913b34.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0574_zps3cb16a87.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0574_zps3cb16a87.jpg.html)


Sunday - Sanded the dash and a pillars and applied a couple of coats of paint (got tired of seeing the primer/aqua colored dash)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/7-20-147_zpsb4d4ff6d.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/7-20-147_zpsb4d4ff6d.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/7-20-148_zpse83be319.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/7-20-148_zpse83be319.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0578_zps65123895.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0578_zps65123895.jpg.html)

[chris_65]

What a productive past couple of days!!!
#1 Made a template and mounted the clutch reservoir.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0573_zps53b653b4.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0573_zps53b653b4.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0572_zpsa769cbe2.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0572_zpsa769cbe2.jpg.html)

#2 Finished all the harness wiring.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0577_zps8e7d4bad.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0577_zps8e7d4bad.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0576_zpsc7b77fdc.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0576_zpsc7b77fdc.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0575_zps7c913b34.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0575_zps7c913b34.jpg.html)

#3 (the BIG one) got the hear the engine start and run (just for a few seconds) on the first crank (using starting fluid, still deciding on fuel tank/pump).
#4 My cousin Norb (university automotive professor) hooked up his scan tool and all the sensors seem to be reading properly.
#5 Installed the power steering lines.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0584_zpsf0c67483.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0584_zpsf0c67483.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0583_zpsc72e18d7.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0583_zpsc72e18d7.jpg.html)

#6 Placed the car on jack stands and removed the old fuel tank in preparations for a new fuel system.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0592_zps64d94c89.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0592_zps64d94c89.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0591_zpscd1c637b.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0591_zpscd1c637b.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0589_zpsedd99348.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0589_zpsedd99348.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0588_zpsa73b7b88.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/IMG_0588_zpsa73b7b88.jpg.html)


#7 Met with Jake Murry and his neighbor Steve, to discuss creating a rendering of the finished car.

Next up?
- Fuel system?
- Finish the trans tunnel?

[chris_65]

I met with Steve Woolard (the guy doing the rendering of my car) and did some final tweaking and this is what I ended up with: :whenitsdone:

Red with smoke grey Vintage Wheel Works V40s and the same color of grey on the grille -with a Ridetech logo on the 1/4 panel.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/2014-08-2509_31_10-Carwlogopdf-AdobeReader_zpsa9386e75.png (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/2014-08-2509_31_10-Carwlogopdf-AdobeReader_zpsa9386e75.png.html)

Without Logo on 1/4 panel.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/2014-08-2513_41_55-DkRedwologoampgreygrillepdf-AdobeReader_zps2c95bba1.png (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/2014-08-2513_41_55-DkRedwologoampgreygrillepdf-AdobeReader_zps2c95bba1.png.html)

The ultimate goal is to be able to:
#1 - Run the complete Ridetech suspension front and rear Level 3 kit w/ fully adjustable coil-overs.
#2 - Run either Vintage Wheel Works V40s or Forgeline 18" wheels (I really haven't decided yet)

But first things first, I've got to get it running on it's own power...

Next up -
- Fuel system
- Fuel tank
- run lines and mount filter/reg.
- Hear it run for more than a second

- Finish trans tunnel and floorboards

[chris_65]

Well, that didn't take long to get this thread caught up to date...

Small update: This past weekend, I had a meeting with a college buddy that's now a welding professor at the local university. We discussed building me a fuel tank that I can run the OEM style fuel pump. It will be deeper than stock (I was worried at first, but seeing how low a lot of the tanks hang on cars that are tearing up the track) mine should be fine. It will also have a recess in the top, so the lines won't hit the bottom of the trunk floor... Hopefully I'll have it in a couple of weeks.

While I'm waiting:

- I've installed the new Lokar throttle cable
- Modified the gas pedal rod to accept the new cable
- Still working on the trans tunnel

[rickpaw]

The rendering looks killer. Can't wait to see it finished.

[SixFivePost]

Hey, you over here too? :-) Can't wait to see it completed.

Dan

[WSSix]

I like the direction you're headed, Chris. Hard line with a C5 filter/regulator will work just fine for you. If you can build a tank or adapt the stock tank to hold a factory 4th gen fbody fuel pump assembly, that will work well for you, too. Good luck!

[chris_65]

I like the direction you're headed, Chris. Hard line with a C5 filter/regulator will work just fine for you. If you can build a tank or adapt the stock tank to hold a factory 4th gen fbody fuel pump assembly, that will work well for you, too. Good luck!

Thanks, Trey! :thankyou:

I'm going to have a friend make me a tank to accept the 4th gen pump and be recessed on the top to clear my lines and not hit the trunk floor. I would've had to highly modify a stock tank to make the pump fit. The stock tank is shorter than 7" @ the deepest point and the collapsed pump is roughly 9". I designed the profile of the tank and at first I was scared of the depth, but looking at other Chevelles tearing up the track, theirs hang pretty low without any issues. I'm hoping mine will hang just right.

On a 4th gen pump, how are people running a vent tube from the center port on top of the pump? Any companies making vents for tanks?
Once I get the tank back, I'll post some pics.

[chris_65]

It's been a while since my last up, so let me get you caught up...
I'm still waiting on my custom tank to be built by a friend of mine. He has it almost completed, but since I first approached him about building it, his welding business has really took off and my tank has taken a back burner to extremely high paying jobs. He's basically charging me for the material, so I guess I can't complain too much.

I decided to replace the rusty and patched floorboards, that were replaced by the previous owner (which didn't know much about welding or panel replacement). I ventured over to Flora IL. and saw a buddy of mine that sales Camaro, Chevelle and Nova parts. His shop is only a 45 min. drive and it saved me on all the freight cost.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/1725006_373947322764766_1180149360333854164_n_zps9 c3ee80a.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/1725006_373947322764766_1180149360333854164_n_zps9 c3ee80a.jpg.html)

While I've been away, I also got a sweet deal on a used Millermatic 130xp welder. It's about 4-5 yrs old and still works great. My old welder still worked ok, but I bought it 10 yrs ago, the same day I bought my 65 convertible. With all the welding coming up in my future, I knew I better invest in something better.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/10329050_391458167680348_3908645201337381919_n_zps 6037a4ee.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/10329050_391458167680348_3908645201337381919_n_zps 6037a4ee.jpg.html)http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/10898119_391458161013682_2537031278539979111_n_zps 92d412c6.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/10898119_391458161013682_2537031278539979111_n_zps 92d412c6.jpg.html)

[chris_65]

Over the past month or so, I've been able to cut out the old floorboards and install the new ones.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/10922609_394057444087087_4468156710513737219_n_zps 46edf594.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/10922609_394057444087087_4468156710513737219_n_zps 46edf594.jpg.html)http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/10922805_394057440753754_204484395695332826_n_zps5 93e636d.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/10922805_394057440753754_204484395695332826_n_zps5 93e636d.jpg.html)

Next up - fab a trans tunnel

[chris_65]

I also reached out to Aaron Oberle aka Project "G-Velle" and he was nice enough to sell me his old harness bar from the "G-Velle". Since he upgraded to the awesome "Tiger Cage", he wasn't going to use the harness bar.

Here's the harness bar in Aaron's 65'

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/10869598_379906345502197_4611762249153240253_o_zps d31a2f74.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/10869598_379906345502197_4611762249153240253_o_zps d31a2f74.jpg.html)

I'll work on getting it mounted in my car, once the floorboards are completed...

Thanks again, Aaron! It's going to a good home.

[chris_65]

I was able to spend some time in the garage yesterday:

I finished fabricating the transmission tunnel and got it welded in. I made the panel on top removable, so if I needed to, I can remove the panel and get to the four bolts holding the shifter to the transmission.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/10947544_399388606887304_3808510645329495583_o_zps 702805f4.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/10947544_399388606887304_3808510645329495583_o_zps 702805f4.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/10917963_399388603553971_1936186003201040345_o_zps c8048c11.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/10917963_399388603553971_1936186003201040345_o_zps c8048c11.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/10923712_399388616887303_844379104772567336_o_zps2 c6fbda5.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/10923712_399388616887303_844379104772567336_o_zps2 c6fbda5.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/10827966_399388593553972_6806612505339975670_o_zps 75326847.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/10827966_399388593553972_6806612505339975670_o_zps 75326847.jpg.html)

A little grinding, seam sealer and paint and the floors will be ready for sound deadening.

Next up harness bar install and then seat mounts...

[WSSix]

good luck! you're moving along nicely.

[chris_65]

good luck! you're moving along nicely.

Thanks Trey!

[chris_65]

Tonight I was able to get the harness bar welded in. Thanks Aaron for the information on my height making a difference on how high to mount the bar. I mounted it at your specs, but once I get the seats mounted, I can adjust the bar if I need to.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P2020019_zpsa791724b.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P2020019_zpsa791724b.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P2020023_zpsbe4a3004.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P2020023_zpsbe4a3004.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P2020026_zps6247c33c.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P2020026_zps6247c33c.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P2020028_zpsdd7cf54f.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P2020028_zpsdd7cf54f.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P2020030_zps01fe1eac.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P2020030_zps01fe1eac.jpg.html)

[Justin@EntropyRad]

Like many others on here!

[waynieZ]

Chris, looking good!

[chris_65]

Chris, looking good!

Thanks Wayne!

[chris_65]

2-8-15 I was able to get the driver's seat bolted in. The seat track for the passenger's seat will have to be replaced (track won't slide)
These seats will work great for the first stage of the build.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P2080005_zps95246ce6.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P2080005_zps95246ce6.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P2080008_zps541ae52f.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P2080008_zps541ae52f.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P2080011_zpsd0179cea.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P2080011_zpsd0179cea.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P2080014_zpsc05f6032.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P2080014_zpsc05f6032.jpg.html)

[chris_65]

2-11-15... I was able to find a replacement seat to rob the tracks and recline mechanism. I got the passenger seat tracks modified and seat mounted into place. I also finished the floorboards by grinding the welds, applying seam sealer and a little paint.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P2110003_zps506e6204.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P2110003_zps506e6204.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P2110007_zpse0e8f0dd.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P2110007_zpse0e8f0dd.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P2110012_zpseb3ffd51.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P2110012_zpseb3ffd51.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/P2110022_zpsb30bdd25.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/P2110022_zpsb30bdd25.jpg.html)

I'm getting close to where I need to turn my focus on getting the LS running longer than a few seconds. The pressure's now on the guy making my tank!

[chris_65]

Well guys, it's been a while since my last update. There's been a lot going on, both with the car and my life in general. My daughter graduated high school in May, so we had several college visits to decide where she was going to continue her collegiate volleyball career. Then we had to get her prepared to go away to school (that was a big adjustment) she ended up picking a college three hours away. Once we got her moved in in August, her volleyball games started. About every weekend, we've been traveling all over the tri-state area to watch her play. Through all this, during the past several months I've had a lot more garage time to work on the build. I'll try and catch you up to date...

[chris_65]

June 7th - I made a trip to see Dean Lewis (Southern Illinois Muscle Car) in Flora, IL. Brought home enough sheet metal to keep me busy for awhile. Dean's a great guy to do business with...

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11415448_453599704799527_1678755683101187193_n_zps svn9hjkf.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11415448_453599704799527_1678755683101187193_n_zps svn9hjkf.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11407013_453599721466192_7395538507975585130_n_zps lsr7wh5c.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11407013_453599721466192_7395538507975585130_n_zps lsr7wh5c.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11392823_453599734799524_8459823216531534145_n_zps l0hswqaa.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11392823_453599734799524_8459823216531534145_n_zps l0hswqaa.jpg.html)

[chris_65]

July 12th - I was able to get a little garage time the past couple of days...
#1 got the old driver's side rocker panel and bottom of the rear quarter cut off.
#2 mocked up and started tacking in the new rocker panel.
#3 reinstalled the driver's door, temporarily for alignment purposes.
Once the rocker is completed, the rear quarter will be coming off next.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11709691_469557599870404_7452714834413473377_n_zps nyczkfyv.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11709691_469557599870404_7452714834413473377_n_zps nyczkfyv.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11701104_469557586537072_7180198951698813115_n_zps 1k8rtsjq.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11701104_469557586537072_7180198951698813115_n_zps 1k8rtsjq.jpg.html)

URL=http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11694878_469557533203744_3186487936035964536_n_zps vb6qblq6.jpg.html]http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11694878_469557533203744_3186487936035964536_n_zps vb6qblq6.jpg[/URL]

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11700885_469557563203741_1381682667724769607_n_zps uozb08pf.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11700885_469557563203741_1381682667724769607_n_zps uozb08pf.jpg.html)

[chris_65]

July 12th - I was also able to finally finish the wooden cribbing. This allows it to sit on all fours, but still be high enough to work on.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11751426_469558989870265_8842795174075492992_n_zps uuzrp5b6.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11751426_469558989870265_8842795174075492992_n_zps uuzrp5b6.jpg.html)

[chris_65]

Aug. 23rd - I finished welding up the driver's side rocker and put a small patch in the bottom of the driver's door.

I also removed the poorly installed driver's side rear quarter panel. It exposed a lot of nasty patch jobs on the outer wheel-well and trunk area. The trunk photos also show how the previous owner patched the trunk floor with truck bed material.

My next step will be to start cutting out the old trunk floor to make room for the new one.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11951810_483728231786674_7192638191945948148_n_zps s6yvmkse.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11951810_483728231786674_7192638191945948148_n_zps s6yvmkse.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11924229_483728208453343_6842567874871166335_n_zps ulgzovj3.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11924229_483728208453343_6842567874871166335_n_zps ulgzovj3.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11870802_483728261786671_7001780730051745784_n_zps 7wjm4h9r.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11870802_483728261786671_7001780730051745784_n_zps 7wjm4h9r.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11947442_483728245120006_4437042313690257234_n_zps exrbctga.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11947442_483728245120006_4437042313690257234_n_zps exrbctga.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11888090_483728291786668_3544468235115801189_n_zps 26n661nn.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11888090_483728291786668_3544468235115801189_n_zps 26n661nn.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11205585_483728278453336_8728781425893278193_n_zps nycztwne.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11205585_483728278453336_8728781425893278193_n_zps nycztwne.jpg.html)

[chris_65]

Aug. 24th - I had the honor of having Tom Farrington as guest in my garage to check out the build and bring me a special delivery from Michigan. Thanks to Aaron Oberle's latest engine upgrade, he was willing to part with his old exhaust system out of his Chevelle. This exhaust is track tested and has been on some of the biggest tracks including Daytona and Las Vegas. With it coming out of Aaron's 65', it will hopefully be a easy bolt-in. Aaron and I have tried a couple of times to meet up to get the exhaust, but with Aaron in Michigan and me in Indiana, we couldn't make it happen. A couple of weeks ago, Aaron was heading to Indiana with his Chevelle w/ new engine. He was meeting up with Tom to take their Chevelles out to Pikes Peak in Co. Aaron brought the exhaust with him and left it at Tom's for me to pick up later. Tom contacted me and told me that he was going to be in the area, this week for business and to pick up a few parts from Bowler Transmissions. He loaded up the exhaust and brought it down with him. He met me at the nearby gas station and followed me to my house to check out my work. My garage is no where near the shops that Aaron and Tom have and neither is the car, but I work with what I've got. Tom had nothing but kind words to say about my build and we were able to visit for a short time. Those of you that don't know or have never met Tom Farrington and Aaron Oberle, they are both great guys! I've met them both only one time and they've helped me out tremendously. Who else do you know that would transport an exhaust system from Michigan to southern Indiana and help you carry it into your garage, for someone they've only met once.

Aaron Oberle and Tom Farrington, I greatly appreciate everything you guys have done for me and my build, so far and I am proud to call you my friends!

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11935081_484482505044580_6768418941674672492_n_zps n04idwps.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11935081_484482505044580_6768418941674672492_n_zps n04idwps.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11951396_484482518377912_210850099461326500_n_zpsa poxor4f.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11951396_484482518377912_210850099461326500_n_zpsa poxor4f.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11924916_484482625044568_944256618625270678_n_zpst s0tukeu.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11924916_484482625044568_944256618625270678_n_zpst s0tukeu.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11880583_484482608377903_1701838822294928174_n_zps 7sdzc5ux.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11880583_484482608377903_1701838822294928174_n_zps 7sdzc5ux.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11885109_484482548377909_6878766495850290705_n_zps gjx2fdcs.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11885109_484482548377909_6878766495850290705_n_zps gjx2fdcs.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11889696_484482591711238_2634411029271961136_n_zps 7ttjeivg.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11889696_484482591711238_2634411029271961136_n_zps 7ttjeivg.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11903777_484482641711233_6599393835637056697_n_zps cneqr2ok.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11903777_484482641711233_6599393835637056697_n_zps cneqr2ok.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11933451_484482658377898_8171872857457068972_n_zps 6lvwyseq.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Exhaust/11933451_484482658377898_8171872857457068972_n_zps 6lvwyseq.jpg.html)

[chris_65]

Aug.31st - I was able to get the old center section of the trunk floor cut out and the new one welded in. Next will be the driver's side trunk floor panel and then the outer and inner wheel wells and trunk drop.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11885187_486850941474403_3360764678972718723_n_zps pgs30vvx.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11885187_486850941474403_3360764678972718723_n_zps pgs30vvx.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11990470_486850951474402_4706778711997770628_n_zps huxkf1ty.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11990470_486850951474402_4706778711997770628_n_zps huxkf1ty.jpg.html)

[chris_65]

Sept. 3rd - I was able to get the driver's side trunk floor welded in and the trunk drop clamped into place. Starting to look like a floor.

Next up - weld in the trunk drop and then move onto the wheel well.

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/10404445_487951504697680_6108217484442170471_n_zps duob1tdj.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/10404445_487951504697680_6108217484442170471_n_zps duob1tdj.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11209516_487951538031010_2121371589872409132_n_zps ldsuxdci.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11209516_487951538031010_2121371589872409132_n_zps ldsuxdci.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11921609_487951494697681_6088760244376113586_n_zps larl3mnp.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11921609_487951494697681_6088760244376113586_n_zps larl3mnp.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11954567_487951554697675_6003408024300439066_n_zps 9tc1vhia.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11954567_487951554697675_6003408024300439066_n_zps 9tc1vhia.jpg.html)


http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11953230_487951521364345_616876424316423625_n_zps4 3uraq0l.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11953230_487951521364345_616876424316423625_n_zps4 3uraq0l.jpg.html)

[chris_65]

Sept. 21st - I was able to remove the old outer wheel-well and part of the inner wheel-well. I then installed the new outer wheel-well, modify the new inner wheel-well and the area of the of the left hand section of the trunk floor to make the wheel-well 2" wider. Doing it this way was a little harder, but saved me some $$$. Today, I was able to get almost everything tacked into place. The wider tubs combined with a modified frame (to be done later) will allow for a lot bigger tire on the rear...

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12002143_493943714098459_4117531078123206455_n_zps 6cavytyq.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12002143_493943714098459_4117531078123206455_n_zps 6cavytyq.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12046854_493943704098460_5408532590087800202_n_zps meskgeym.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12046854_493943704098460_5408532590087800202_n_zps meskgeym.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12046983_493943694098461_176907325950339871_n_zps8 wbzmsni.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12046983_493943694098461_176907325950339871_n_zps8 wbzmsni.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12027784_493943730765124_504939376231738016_n_zps8 kycaaxf.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12027784_493943730765124_504939376231738016_n_zps8 kycaaxf.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12047139_493943797431784_3771313680479646309_n_zps gc2nox5i.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12047139_493943797431784_3771313680479646309_n_zps gc2nox5i.jpg.html)


http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12020015_493943777431786_795924529954775581_n_zpss kz3sg6q.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12020015_493943777431786_795924529954775581_n_zpss kz3sg6q.jpg.html)

[chris_65]

Sept. 22nd -This is how I made the 2" wider tubs... Once I had the trunk floor welded in, I used "blue painters tape" and marked where I wanted to cut to give me the two extra inches.
#1 I placed the tape so that I could still keep the factory wheel-well curve in the floor to weld back in once I removed the 2". I did the same to the inner wheel-well (the wheel-well had a factory crease to use as a guide).
#2 I Cut out both areas in pic#2, Discarding the old wheel-well.
#3 I then had to cut out the same areas on the inside where the back seat goes.
#4 Then cut off the 2" off the trunk floor section.
#5 Tacked in the modified floor section
#6 I then had to modify the new inner wheel-well, by cutting off the flange that would've attached to the outer wheel-well.

Once everything is welded into place, it gives me a 2" wider wheel tub and more room for wider tires...

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12002851_494088487417315_2706449892114288044_n_zps b1ekhbbf.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12002851_494088487417315_2706449892114288044_n_zps b1ekhbbf.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12052573_494088467417317_8642922976720740643_o_zps 58ewejcl.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/12052573_494088467417317_8642922976720740643_o_zps 58ewejcl.jpg.html)

http://i1276.photobucket.com/albums/y476/ccopp_65/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11951931_494088477417316_3226037295994167414_n_zps 3rpwpcft.jpg (http://s1276.photobucket.com/user/ccopp_65/media/1965%20Chevelle%20300%20Track%20Car%20Build/Metal%20work/11951931_494088477417316_3226037295994167414_n_zps 3rpwpcft.jpg.html)

[waynieZ]

nice job!