Remote bleeder..

[XLexusTech]

Purchased a remote bleeder from summit which was supposed to include an adapter but the supplied adapter is wrong thread. How are guys connecting quarter master remote bleeders to f body throwout bearings?

3/8 flare to -3AN adapters? If yes part number ?

thanks in advance for any help

[dontlifttoshift]

M10 x1.5 is the thread size and pitch on the bleeder hole on a 98-02 throw out bearing.

You will have to seal it with a copper or aluminum crush washer.

:sarcasm_smiley: Can't believe summit couldn't help you with that.

[XLexusTech]

M10 x1.5 is the thread size and pitch on the bleeder hole on a 98-02 throw out bearing.

You will have to seal it with a copper or aluminum crush washer.

:sarcasm_smiley: Can't believe summit couldn't help you with that.

"Summit support: http://www.summitracing.com/parts/qtm-710105 is all you need"

[dontlifttoshift]

Yeah, I bet that fits the Quarter Master TO bearing perfectly.