neutral safety switch

[malo69]

what neutral safety switch do I need for a ls2 with 6 speed in a 69 Camaro where can I get one?

[DETON8R]

Switch goes on the clutch pedal. It is just like a brake switch for a brake pedal. The question you need to answer is what kind if pedals are you using?

Are you using stock pedals? Are you using a late model wiring harness or a stock 1969 harness? Either way you should be able to get a switch from a Camaro restoration parts house or if you plan on using a late model switch check a junk yard or eBay.

[malo69]

ok thank you im using stock pedals and a new American auto wiring kit :drowninga:

[jwcarguy]

I run into through the starter circuit (w/relay added) also using a AAW Update wiring harnesses
clutch pedal activated switch (clutch has to be depressed for car to crank over / start)

Hope this helps
Jeff

[Musclerodz]

Switch goes on the clutch pedal. It is just like a brake switch for a brake pedal. The question you need to answer is what kind if pedals are you using?

Are you using stock pedals? Are you using a late model wiring harness or a stock 1969 harness? Either way you should be able to get a switch from a Camaro restoration parts house or if you plan on using a late model switch check a junk yard or eBay.

brake pedal switch (umless you get creative and use a relay) can't handle the amps the neutral saftery switch will. Use factory nss, I get them from Firewheel Classics, but any major vendor like Classic Industries or Year One should have them