View Full Version : Oil pan question
XLexusTech
06-22-2014, 08:23 AM
I have a jakes subframe an just figured out my gmpp motor came with a corvette pan ... Anyone have any luck with the new camaro pan?
Part Number: 12640748
jwcarguy
06-22-2014, 08:52 AM
not sure on the fitment of the Camaro oil pan
Which pan are you referring to? the earlier 98-02' F-body oil pan
or the new fifth gen Camaro oil pan
If the issue is at the "front" of the sump, the earlier Camaro pan is approx 2" shorter
I may be interested in the vette pan for a future build also
here are some pics with dimensions:
XLexusTech
06-22-2014, 12:27 PM
Not sure jake said camaro pan works but not sure if that means gen 4 or 5...
You are first dibs on pan if you wan it.
jwcarguy
06-22-2014, 12:38 PM
Not sure jake said camaro pan works but not sure if that means gen 4 or 5...
You are first dibs on pan if you wan it.
my guess is he was referring to the standard "f-body" oil pan (98-02')
since you can see in the pic that it is only 11 1/2 long in the sump, rather than the 13 1/2" on the Vette pan
The 5th gen Camaro pans are deeper and are as long as the Vette pans
I use the Vette pans on sand rail LS swaps
here is my Desert Dynamics car
( the muddy one, is after it's maiden voyage with the new engine I built and bigger transaxle, so much for a "Dry Lake Bed")
XLexusTech
06-23-2014, 05:36 PM
Anyone know if the wind age tray is the same between f body (2002) and corvette
Gabe @ G-Rodz
06-24-2014, 11:07 AM
Each oil pan has its own windage tray. They are not compitable....
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.