4mm
06-06-2014, 11:41 PM
Item Location (City/State):CA
Price:12000
Description:Dart Big M 555 Motor
I purchased this engine a bit less than two years ago with plans for it to go into a Chevelle or truck. My priorities have changed so I must now sell it. Specs are listed in the link and it is still at Chris place at JCG Restorations in Oxnard CA.
http://www.jcgrestorationandcustoms.com/
Engine was machined by Kenny Duttweiler, renowned engine builder, if you haven't heard of him just "GOOGLE" his name :)
What has been done to the engine by Chris is the springs, cam and related parts were installed. The engine was then professionally broken in, tuned and dynoed.
My price is $12K includes delivery within the CONUS and will also include a barely used Vintage Air Front Runner system with A/C compressor, water pump, alternator, hardware, and power steering pump. Everything a new Front Runner kit would include will come with the engine.
http://www.summitracing.com/parts/vta-174048/overview/
It is ready to drop in with the exception of the flywheel and starter. Cost is over $18k to duplicate.
Here is a link with vids and the HP/TQ from the dyno runs. I have sold many items on the forum, so please check my history.
Thanks and please PM any questions.
http://www.lateral-g.net/forums/showthread.php4?t=24109&highlight=dart+555
Price:12000
Description:Dart Big M 555 Motor
I purchased this engine a bit less than two years ago with plans for it to go into a Chevelle or truck. My priorities have changed so I must now sell it. Specs are listed in the link and it is still at Chris place at JCG Restorations in Oxnard CA.
http://www.jcgrestorationandcustoms.com/
Engine was machined by Kenny Duttweiler, renowned engine builder, if you haven't heard of him just "GOOGLE" his name :)
What has been done to the engine by Chris is the springs, cam and related parts were installed. The engine was then professionally broken in, tuned and dynoed.
My price is $12K includes delivery within the CONUS and will also include a barely used Vintage Air Front Runner system with A/C compressor, water pump, alternator, hardware, and power steering pump. Everything a new Front Runner kit would include will come with the engine.
http://www.summitracing.com/parts/vta-174048/overview/
It is ready to drop in with the exception of the flywheel and starter. Cost is over $18k to duplicate.
Here is a link with vids and the HP/TQ from the dyno runs. I have sold many items on the forum, so please check my history.
Thanks and please PM any questions.
http://www.lateral-g.net/forums/showthread.php4?t=24109&highlight=dart+555