1968 Camaro Rear Window Regulator Sheet Metal

[ADiCarlo]

Does anyone know of a place that makes or sells replacement sheet metal for the rear window regulator area. Someone proceeded to cut out this area on my car and i need a replacement.

Below is a shot of the perfect passenger side that I have. The driver side is the one cut out.

http://i761.photobucket.com/albums/xx258/adicarlo86/IMG_6368_zps6c0a94ef.jpg (http://s761.photobucket.com/user/adicarlo86/media/IMG_6368_zps6c0a94ef.jpg.html)

I was able to find a complete piece like the one in the link below but paying 400 for just that piece seems really steep.

http://www.heartbeatcitycamaro.com/store/product/24556/Camaro-Quarter-panel-sail-panel-RH-1967-1968-1969/

[Vince@Meanstreets]

Does anyone know of a place that makes or sells replacement sheet metal for the rear window regulator area. Someone proceeded to cut out this area on my car and i need a replacement.

Below is a shot of the perfect passenger side that I have. The driver side is the one cut out.

http://i761.photobucket.com/albums/xx258/adicarlo86/IMG_6368_zps6c0a94ef.jpg (http://s761.photobucket.com/user/adicarlo86/media/IMG_6368_zps6c0a94ef.jpg.html)

I was able to find a complete piece like the one in the link below but paying 400 for just that piece seems really steep.

http://www.heartbeatcitycamaro.com/store/product/24556/Camaro-Quarter-panel-sail-panel-RH-1967-1968-1969/

put up a picture of the drivers side section, we are gutting a 69 right now and you may be in luck.

[ADiCarlo]

Hi Vince

Here's a picture of what were missing let me know if you have any parts that would work.

Thanks

http://i761.photobucket.com/albums/xx258/adicarlo86/Camaro%20Parts/A04DC7A1-2B0B-4898-A8D1-22CE2D4055B9_zpsskqjgys4.jpg (http://s761.photobucket.com/user/adicarlo86/media/Camaro%20Parts/A04DC7A1-2B0B-4898-A8D1-22CE2D4055B9_zpsskqjgys4.jpg.html)

[Vince@Meanstreets]

on the door jam, is that all the way to the lip?

you can weld right? :welder:

i'll take a picture of what i can get you.

vince

[ADiCarlo]

on the door jam, is that all the way to the lip?

you can weld right? :welder:

i'll take a picture of what i can get you.

vince

Yeahs it's to the lip.

My car is at a shop right now getting welded and he's really good. Originally he wanted to do a flat close out panel and pin the windows but I want more function than that. The hardest part is all the grooving for the regulator mounts.

Let me know what you have.

Thanks

[Vince@Meanstreets]

this is what i have but i'll have to leave some room for the bonding strips for the differential cooler mounts.