68 camaro with dse quadralink what rear brakes?

[6t9 camaro]

Hello I'm having trouble fitting a rear brake caliper onto the discs I purchased for my camaro. I bought a rear disc brake kit from summit but the calliper is huge and it either hits the quadralink brackets or the cars frame! I need the e-brake as well so I'm just wondering what some of you guys have done for rear brakes?
Thanks

[Musclerodz]

What housing ends does it have on it. DSE normally installs Torino ends on their housings. Never had an issue.

[6t9 camaro]

Unfortunately I don't have the Torino ends I have the 12 bolt Chevy ends. I'm wondering if the offset of the rotor is moving the caliper to far inward?

[Vince@Meanstreets]

Unfortunately I don't have the Torino ends I have the 12 bolt Chevy ends. I'm wondering if the offset of the rotor is moving the caliper to far inward?

sounds like the T-bird/Mustang set up that they have. the bracket clocking and caliper does suck.

I'd move into a 2000+ Camaro rear set up.

[Smittys67]

What is the rear end width?

[6t9 camaro]

I don't know the exact width but it has been narrowed 3" per side. The car does have the dse mini tubs as well.

[Musclerodz]

Did you buy the rear end complete? Should have approximately 2" of the axle sticking out of the housing. What brake kit did you get from summit?